Laserfiche WebLink
Installation Gude: Residential Advan Tee Systems <br /> Y i <br /> Step 4s: We recommend placing the AdvanTex pod to the <br /> side of the tank. If you wish to install the pod directly over <br /> the top of the tank,follow the tank manufacturer's guidelines <br /> for backfilling the tank and place a minimum 5"thick layer of <br /> compacted soil or sand on top of the tank in order to get the <br /> required slope on the filtrate return line. <br /> IMPORTANT. Because of tank buoyancy issues, if you do <br /> install the AdvanTex pod directly over the tank conduct a <br /> thorough buoyancy analysis. <br /> Step 4b: AdvanTex pods come standard with predrilled <br /> fiberglass tabs on the bottom comers and a set of antiflotation <br /> flanges.The antiflotation flanges help prevent the pod from <br /> "floating out"of the ground under saturated soil conditions. <br /> The antiflotation flanges come with stainless steel bolts for <br /> attachment to the predrilled fiberglass tabs.With the flanges in ` <br /> position under the pod,mark and drill 17/64" diameter holes in <br /> the flanges to line up with the predrilled holes in the tabs.Use <br /> the 1/420 x 1.25 bolts and nuts provided to attach the flanges to <br /> the tabs. <br /> Ste 4e: Set the AdvanTex pod in lace.An AX20 weighs <br /> P P P <br /> about 300 ib dry,light enough for two people to move by hand. <br /> If moving the pod manually is not feasible,you can lift and set <br /> the pod into place by slinging two wide truck straps under the <br /> entire unit and lifting it with a backhoe. <br /> Step 4d: If the soil is noncohesive or if there is less than 22" <br /> of soil along the sides of the pod,you will need to pour concrete <br /> over the pod's antiflotation flanges,to prevent the pod from <br /> "floating out"when the groundwater level rises.The concrete o ;b <br /> should be 6 inches d y and extend 12 inches awa from side of o `aa'' <br /> p.a, ;..�-. <br /> the pod. <br /> Step 4e: Backfill a six-to eight-inch layer of soil around the E �' <br /> perimeter of the AdvanTex pod to prevent it from shiffing while <br /> you make connections. This layer will also provide a bed that <br /> will support the supply lines. I <br /> Qa <br /> NIM.KrX-AX-t 0 2004 Orsnca SystOMS*Inc. <br /> Rev 11.04101 <br />