Laserfiche WebLink
Installation %'' <br /> ate©n G H ide.z: RBS�1�,f ia!A va#T$ SysMws <br /> - Step 6: Set the panel's programmable timer: <br /> a. Press the ESC key. <br /> b. Press the down arrow key to select"Set Param." <br /> c. Press the OK key. <br /> WARNING. Do not select "Stop."Selecting this option will <br /> erase the panel programming and will require an EEPROM <br /> ,.. cared(not shipped with the panel) to reprogram. If you <br /> inadvertently press the OK button while "Stop"is highlighted, <br /> select "No"on the confir7nation screen and press OK to go <br /> hack to the tamer setting menu. <br /> d. Use the up and down arrow.keys to scroll through the <br /> parameters. When you find one you wish to alter,press <br /> the OK key. <br /> e. Use the left and right arrow keys to highlight the <br /> character you wish to change.When the cursor is over <br /> the character,use the up and down arrow keys to change <br /> its value.When you are satisfied with the value,press the <br /> OK key. <br /> E To set other parameters,repeat the previous two steps. <br /> g. Press the ESC key twice to exit. <br /> ( NOTE: More detailed timer setting instructions can be found <br /> hanging from a clip on the inside of the control panel door. <br /> Refer to Appendix 2: Timer Settings Worksheet on page 19 for <br /> an example. <br /> * If tyre instructions are missing or have been removed from the door pouch inside the control panel. call Orenco for a replacement or down- <br /> load a copy of the instructions from our online Document Library at www orenco.com. <br /> a 2604 Orence systems*Inc. NIM-ATX-AX-1 <br /> Rev 3.1,OW <br />