Laserfiche WebLink
Installation Guide, Residential Advanrex® systems <br /> MISSION <br /> S�rt`Up�o� ��o�fix��Panel stems - - <br /> Step 1: Use the log sheet from the door pouch inside the <br /> control panel to document measurements and other data. <br /> Step 2: Before proceeding, fully open the ball valve on the <br /> discharge plumbing assembly and make sure the pump is <br /> submerged. <br /> Step 3: Familiarize yourself with the means of determining the <br /> types of alarms. Whenever an alarm condition occurs,the audible <br /> alarm will sound,and the red light on the front of the panel will <br /> illuminate.You can silence the audible portion of all alarms by <br /> pushing the illuminated light.You can determine the type of <br /> alarm condition by the steady/blinking status of the alarm light: 0 <br /> • Steady light: high-level alarm <br /> • Blinlung light: low-level alarm <br /> You can also determine the float positions and alarm conditions ® top haat <br /> }sigh water arm <br /> by viewing the LCD screen inside the control panel ® override <br /> Step 4: Familiarize yourself with the floats on the system <br /> 0 <br /> Step 5: To test the operation of the floats,remove the float y <br /> stem from the pump vault.All.floats go from"open"to <br /> "closed'position when the liquid level is near the center of Bottom float <br /> the float collar. The differential(drawdown) of the float is Law water afa w <br /> approximately 11811. ;Mdumurrt off <br /> Drop the bottom float to its open(down)position to verify ymr <br /> operation of the low-level alarm. The audible alarm should tejjw <br /> sound and the red alarm light should blink.When the low-level <br /> alarm is activated, the pump should also be inoperable.Verify <br /> this by flipping the MOA switch to manual. During normal © closed <br /> system operation,the bottom float will be in its closed(up) position <br /> position. <br /> Keeping the bottom float up,raise the top float to its closed <br /> (up)position. The high water alarm should sound and the open <br /> red alarm light should shine steadily. During normal system position <br /> operation,the top float will be in its open(down)position. <br /> U <br /> NIM•ATX-AX-1 ®2004 Orence Systems*Inc. <br /> Rev M,04104 <br />