|
�4
<br /> 32" MIN. 32" MIN. 14 DOOR NOTES:
<br /> '9
<br /> 1. REVOLVING DOORS, REVOLVING GATES, AND TURNSTILES SHALL NOT BE PART OF AN ACCESSIBLE ROUTE.
<br /> 2. AT LEAST ONE OF THE ACTIVE LEAVES OF DOORWAYS WITH TWO LEAVES SHALL.
<br /> F_ -1 18" MIN. (INT) 4> 3. DOOR OPENINGS SHALL PROVIDE A CLEAR WIDTH OF 32 INCHES MINIMUM. CLEAR OPENINGS OF
<br /> 18" MIN. (INT) Z 24 MIN. EXT Z z z F DOORWAYS WITH SWINGING DOORS SHALL BE MEASURED BETWEEN THE FACE OF THE DOOR AND THE DESIGN
<br /> L11IN. EXT 4 z 24" MIN. z O STOP, WITH THE DOOR OPEN 90 DEGREES. IN ALTERATIONS, A PROJECTION OF 5/8 INCH MAXIMUM INTO
<br /> o o \ \ 36MIN. o iv 22" MIN. b 24" MIN. THE REQUIRED CLEAR WIDTH SHALL BE PERMITTED FOR THE LATCH SIDE STOP.
<br /> co \ co \ \ co " co \ 4. THERE SHALL BE NO PROJECTIONS INTO THE REQUIRED CLEAR OPENING WIDTH LOWER THAN 34 INCHES ArchitecturaGED DOOR SLIDING DOOR FOLDING DOOR \ X>8„ - - ABOVE THE FINISH FLOOR OR GROUND. PROJECTIONS INTO THE CLEAR OPENING WIDTH BETWEEN 34 Solutions Group
<br /> CLEAR WIDTH OF DOORWAYS - - - - - - - - - - J - - - - - INCHES AND 80 INCHES ABOVE THE FINISH FLOOR OR GROUND SHALL NOT EXCEED 4 INCHES.
<br /> - - 5. MANEUVERING CLEARANCES FOR FORWARD APPROACH SHALL BE PROVIDED WHEN ANY OBSTRUCTION
<br /> WITHIN 18 INCHES OF THE LATCH SIDE AT AN INTERIOR DOORWAY, OR WITHIN 24 INCHES OF THE LATCH 2455 Bennett Valley Rd.Suite A-102
<br /> SIDE OF AN EXTERIOR DOORWAY, PROJECTS MORE THAN 8 INCHES BEYOND THE FACE OF THE DOOR, Santa Rosa, CA. 95404
<br /> 4FRONT APPROACH, PULL SIDE FRONT APPROACH PULL SIDE HINGE APPROACH. PULL SIDE SIDE APPROACH POCKET OR HINGE APPROACH LATCH APPROACH. PULL SIDE STOP OR LATCH APPROACH MEASURED. PERPENDICULAR TO THE FACE OF THE DOOR OR GATE.
<br /> rr- � 6. FLOOR OR GROUND SURFACE WITHIN REQUIRED MANEUVERING CLEARANCES SHALL NOT SLOPE STEEPER
<br /> \U- 48" MIN. / I. 48" MIN. THAN 1:48.
<br /> 7. THRESHOLDS, IF PROVIDED AT DOORWAYS, SHALL BE 1/2 INCH HIGH MAXIMUM.
<br /> \ F F -1 F -1 F - -1 8. THE DISTANCE BETWEEN TWO HINGED OR PIVOTED DOORS IN SERIES AND GATES IN SERIES SHALL BE 48
<br /> INCHES MINIMUM PLUS THE WIDTH OF DOORS OR GATES SWINGING INTO THE SPACE.
<br /> \ <\� \ <\✓ ` �� �' �� `` �, �� 9. HANDLES, PULLS, LATCHES, LOCKS, AND OTHER OPERABLE PARTS ON DOORS AND GATES SHALL BE ED ARC
<br /> 12" MIN. v v 12" MIN. 4> Z z OPERABLE WITH ONE HAND AND SHALL NOT REQUIRE TIGHT GRASPING, PINCHING, OR TWISTING OF THE GS w
<br /> 24" MIN. 24" MIN. P
<br /> 22" MIN. " 22" MIN. WRIST. THE FORCE REQUIRED TO ACTIVATE OPERABLE PARTS SHALL BE 5 POUNDS MAXIMUM.
<br /> 00 00 00
<br /> °0 00 00 10. OPERABLE PARTS OF HARDWARE SHALL BE 34 INCHES MINIMUM AND 44 INCHES MAXIMUM ABOVE THE Q
<br /> FINISH FLOOR OR GROUND.
<br /> L - - - - - - X>8" - - X>8" L J � - - - - - J� �- - - �� �� - - - � L - - - � 11. DOOR CLOSERS AND GATE CLOSERS SHALL BE ADJUSTED SO THAT FROM AN OPEN POSITION OF TC --28504
<br /> DEGREES, THE TIME REQUIRED TO MOVE THE DOOR TO A POSITION OF 12 DEGREES FROM THE LATCH IS REN. 1/31/19
<br /> 5 SECONDS MINIMUM.
<br /> 48" MIN. \ \ \ \ \ \ 12. THE FORCE FOR PUSHING OR PULLING OPEN A DOOR OR GATE SHALL BE 5 POUNDS MAXIMUM.
<br /> \ \ \ \ \ \ \ \ 13. THE FORCE FOR PUSHING OR PULLING OPEN REQUIRED FIRE DOORS SHALL BE THE MINIMUM OPENING J��
<br /> / \ FORCE ALLOWABLE BY THE APPROPRIATE ADMINISTRATIVE AUTHORITY, NOT TO EXCEED 15 POUNDS. TFOFCA`1 0'_
<br /> 14. SWINGING DOOR AND GATE SURFACES WITHIN 10 INCHES OF THE FINISH FLOOR OR GROUND MEASURED
<br /> VERTICALLY SHALL HAVE A SMOOTH SURFACE ON THE PUSH SIDE EXTENDING THE FULL WIDTH OF THE Seal
<br /> DOOR OR GATE.
<br /> FRONT APPROACH, PUSH SIDE, DOOR FRONT APPROACH PUSH SIDE PUSH SIDE, DOOR PROVIDED WITH LATCH APPROACH, PUSH SIDE LATCH APPROACH, PUSH SIDE, HINGE APPROACH, PUSH SIDE HINGE APPROACH, PUSH 15. AUTOMATIC DOORS AND AUTOMATIC GATES SHALL COMPLY WITH SECTION 11B-404.3. FULL-POWERED
<br /> DOORS IN SERIES PROVIDED WITH BOTH CLOSER AND LATCH PUSH SIDE BOTH CLOSER AND LATCH DOOR PROVIDED WITH CLOSER SIDE, DOOR PROVIDED WITH AUTOMATIC DOORS SHALL COMPLY WITH ANSI/BHMA A156.10. LOW-ENERGY AND POWER-ASSISTED
<br /> 17 DOORS BOTH CLOSER AND LATCH DOORS SHALL COMPLY WITH ANSI/BHMA A156.19. bp
<br /> SCALE: N.T.S. 1113-404
<br /> SIGN TEXT BASELINE OF THE LOWEST BRAILLE CELLS AND 60 INCHES MAXIMUM PICTOGRAMS SHALL CONTRAST WITH THEIR FIELD WITH EITHER A LIGHT
<br /> ABOVE THE FINISH FLOOR OR GROUND SURFACE, MEASURED FROM THE PICTOGRAM ON A DARK FIELD OR A DARK PICTOGRAM ON A LIGHT FIELD.
<br /> Z 1. WHERE BOTH VISUAL AND TACTILE CHARACTERS ARE REQUIRED, EITHER BASELINE OF THE HIGHEST LINE OF RAISED CHARACTERS. 3. PICTOGRAMS SHALL HAVE TEXT DESCRIPTORS LOCATED DIRECTLY BELOW
<br /> REF"�E ONE SIGN WITH BOTH VISUAL AND TACTILE CHARACTERS, OR TWO 2. WHERE A TACTILE SIGN IS PROVIDED AT A DOOR, THE SIGN SHALL BE THE PICTOGRAM FIELD
<br /> AREA OF SEPARATE SIGNS, ONE WITH VISUAL, AND ONE WITH TACTILE CHARACTERS, LOCATED ALONGSIDE THE DOOR AT THE LATCH SIDE. WHERE A TACTILE
<br /> 1 4' REFUGE SHALL BE PROVIDED. SIGN IS PROVIDED AT DOUBLE DOORS WITH ONE ACTIVE LEAF, THE SIGN TOILET FACILITIES
<br /> 2. RAISED CHARACTERS SHALL BE DUPLICATED IN BRAILLE. SHALL BE LOCATED ON THE INACTIVE LEAF. WHERE A TACTILE SIGN IS
<br /> THICMEN NOT IN SIGN K � Q 3. RAISED CHARACTERS SHALL BE 1/32 INCH MINIMUM ABOVE THEIR PROVIDED AT DOUBLE DOORS WITH TWO ACTIVE LEAFS, THE SIGN SHALL
<br /> PICTOGRAM Z � BACKGROUND, UPPERCASE AND SANS SERIF FONT. BE LOCATED TO THE RIGHT OF THE RIGHT HAND DOOR. WHERE THERE IS 1. GEOMETRIC SYMBOLS AT ENTRANCES TO TOILET AND BATHING ROOMS
<br /> FIELD - 4. CHARACTER HEIGHT MEASURED VERTICALLY FROM THE BASELINE OF THE NO WALL SPACE AT THE LATCH SIDE OF A SINGLE DOOR OR AT THE SHALL BE MOUNTED AT 58 INCHES MINIMUM AND 60 INCHES MAXIMUM z
<br /> CHARACTER SHALL BE 5/8 INCH MINIMUM AND 2 INCHES MAXIMUM BASED RIGHT SIDE OF DOUBLE DOORS, SIGNS SHALL BE LOCATED ON THE ABOVE THE FINISH FLOOR OR GROUND SURFACE MEASURED FROM THE ® 0 0
<br /> PICTOGRAM FIELD ON THE HEIGHT OF THE UPPERCASE LETTER '1". NEAREST ADJACENT WALL. SIGNS CONTAINING TACTILE CHARACTERS SHALL CENTERLINE OF THE SYMBOL. WHERE A DOOR IS PROVIDED THE SYMBOL
<br /> MENS 5. STROKE THICKNESS OF THE UPPERCASE LETTER '1" SHALL BE 15 PERCENT BE LOCATED SO THAT A CLEAR FLOOR SPACE OF 18 INCHES MINIMUM BY SHALL BE MOUNTED WITHIN 1 INCH OF THE VERTICAL CENTERLINE OF THE
<br /> MAXIMUM OF THE HEIGHT OF THE CHARACTER. 18 INCHES MINIMUM, CENTERED ON THE TACTILE CHARACTERS, IS DOOR.
<br /> IRARY HEIGHT OF TACTILE CHARACTERS 6. TEXT SHALL BE IN A HORIZONTAL FORMAT. PROVIDED BEYOND THE ARC OF ANY DOOR SWING BETWEEN THE CLOSED 2. MEN'S TOILET AND BATHING FACILITIES. AN EQUILATERAL TRIANGLE, 1/4
<br /> GEOMETRIC POSITION AND 45 DEGREE OPEN POSITION. WHERE PROVIDED, SIGNS INCH THICK WITH EDGES 12 INCHES LONG AND A VERTEX POINTING
<br /> SYMBOL SIGN BRAILLE IDENTIFYING PERMANENT ROOMS AND SPACES SHALL BE LOCATED AT THE UPWARD, SHALL BE LOCATED AT ENTRANCES TO MEN'S TOILET AND
<br /> THICK iV ENTRANCE TO, AND OUTSIDE OF THE ROOM OR SPACE. WHERE PROVIDED, BATHING FACILITIES. THE TRIANGLE SYMBOL SHALL CONTRAST WITH THE DIRECTIONAL SIGN ISA SIGN
<br /> SIGN 9" MIN. 1. BRAILLE SHALL BE CONTRACTED (GRADE 2) AND SHALL COMPLY WITH SIGNS IDENTIFYING EXITS SHALL BE LOCATED AT THE EXIT DOOR WHEN DOOR, EITHER LIGHT ON A DARK BACKGROUND OR DARK ON A LIGHT
<br /> N SECTIONS 1113-703.3 AND 1113-703.4. APPROACHED IN THE DIRECTION OF EGRESS TRAVEL BACKGROUND.
<br /> 1-1 2. BRAILLE DOTS SHALL HAVE A DOMED OR ROUNDED SHAPE AND SHALL 3. WOMEN'S TOILET AND BATHING FACILITIES. A CIRCLE, 1/4 INCH THICK AND ENTRY & DIRECTIONAL SIGN NOTES: J
<br /> 'n WOMENS COMPLY WITH TABLE 116-703.3.1 OF THE CBC. THE INDICATION OF AN VISUAL CHARACTERS 12 INCHES IN DIAMETER, SHALL BE LOCATED AT ENTRANCES TO WOMEN'S Q
<br /> 1,1\ UPPERCASE LETTER OR LETTERS SHALL ONLY BE USED BEFORE THE FIRST TOILET AND BATHING FACILITIES. THE CIRCLE SYMBOL SHALL CONTRAST 1. IN EXISTING BUILDINGS AND FACILITIES WHERE NOT ALL ENTRANCES ARE ACCESSIBLE,
<br /> WORD OF SENTENCES, PROPER NOUNS AND NAMES, INDIVIDUAL LETTERS 1. CHARACTERS AND THEIR BACKGROUND SHALL HAVE A NON-GLARE FINISH. WITH THE DOOR, EITHER LIGHT ON A DARK BACKGROUND OR DARK ON A ACCESSIBLE ENTRANCES SHALL BE IDENTIFIED BY THE INTERNATIONAL SYMBOL OF
<br /> HEIGHT OF RAISED CHARACTERS OF THE ALPHABET, INITIALS, AND ACRONYMS. CHARACTERS SHALL CONTRAST WITH THEIR BACKGROUND WITH EITHER LIGHT BACKGROUND. ACCESSIBILITY. M
<br /> LIGHT CHARACTERS ON A DARK BACKGROUND OR DARK CHARACTERS ON 4. UNISEX TOILET AND BATHING FACILITIES A CIRCLE, 1 4 INCH THICK AND 2. THE INTERNATIONAL SYMBOL OF ACCESSIBILITY SHALL CONSIST OF A WHITE FIGURE ON A D
<br /> ROOM 3. BRAILLE SHALL BE POSITIONED BELOW THE CORRESPONDING TEXT IN A / cn
<br /> 1/4" IDENTIFICATION HORIZONTAL FORMAT, FLUSH LEFT OR CENTERED. IF TEXT IS MULTI-LINED, A LIGHT BACKGROUND. 12 INCHES IN DIAMETER WITH A 1/4 INCH THICK TRIANGLE WITH A VERTEX
<br /> BLUE BACKGROUND. ARTISTIC LICENSE IN THE GRAPHIC REPRESENTATION OF THE SYMBOL
<br /> OSSIGN ITSELF IS NOT PERMITTED.
<br /> N THICK - BRAILLE SHALL BE PLACED BELOW THE ENTIRE TEXT. BRAILLE SHALL BE 2. VISUAL CHARACTERS SHALL BE 40 INCHES MINIMUM ABOVE THE FINISH POINTING UPWARD, SUPERIMPOSED ON AND GEOMETRICALLY INSCRIBED z
<br /> 45' 18" MIN. SIGN O 3. DIRECTIONAL SIGNS THAT INDICATE THE LOCATION OF THE NEAREST ACCESSIBLE ENTRANCE O
<br /> SEPARATED 3/8 INCH MINIMUM AND 1/2 INCH (MAXIMUM FROM ANY FLOOR OR GROUND. WITHIN THE CIRCLE AND WITHIN THE 12-INCH DIAMETER, SHALL BE SHALL BE PROVIDED AT NON-ACCESSIBLE ENTRANCES. N LLJ
<br /> STRIKE SIDE OTHER TACTILE CHARACTERS AND 3/8 INCH MINIMUM FROM RAISED PROVIDED AT ENTRANCES TO UNISEX TOILET AND BATHING FACILITIES. THE 4. DIRECTIONAL SIGNS INCLUDING THE INTERNATIONAL SYMBOL OF ACCESSIBILITY, INDICATING 11
<br /> UNISEX 00 OF DOOR BORDERS AND DECORATIVE ELEMENTS PICTOGRAMS VERTICES OF THE TRIANGLE SHALL BE LOCATED 1/4 INCH MAXIMUM FROM THE ACCESSIBLE ROUTE TO THE NEAREST ACCESSIBLE ENTRANCE, SHALL BE PROVIDED AT o' C�
<br /> CENTERED THE EDGE OF THE CIRCLE. THE TRIANGLE SYMBOL SHALL CONTRAST WITH JUNCTIONS WHEN THE ACCESSIBLE ROUTE DIVERGES FROM THE REGULAR CIRCULATION
<br /> CHARACTERS z
<br /> 18" MIN. ON TACTILE GEOMETRIC SYMBOLS THE CIRCLE SYMBOL, EITHER LIGHT ON A DARK BACKGROUND OR DARK PATH. o
<br /> SIGN INSTALLATION 1. PICTOGRAMS SHALL HAVE A FIELD HEIGHT OF 6 INCHES MINIMUM. ON ALIGHT BACKGROUND. THE CIRCLE SYMBOL SHALL CONTRAST WITH
<br /> LOCATION OF TACTILE SIGNS CHARACTERS AND BRAILLE SHALL NOT BE LOCATED IN THE PICTOGRAM THE DOOR, EITHER LIGHT ON A DARK BACKGROUND OR DARK ON A LIGHT 5. WHERE A DIRECTIONAL SIGN IS REQUIRED, IT SHOULD BE LOCATED TO MINIMIZE m
<br /> 1. TACTILE CHARACTERS ON SIGNS SHALL BE LOCATED 48 INCHES MINIMUM FIELD. BACKGROUND. BACKTRACKING.
<br /> ABOVE THE FINISH FLOOR OR GROUND SURFACE, MEASURED FROM THE 2. PICTOGRAMS AND THEIR FIELD SHALL HAVE ANON-GLARE FINISH. J
<br /> SIGNS AND DIRECTIONAL�61NS
<br /> RESTROOM SIGNS
<br /> SCALE: N.T.S. (�),�EN�.T�I�RY 11 B-70311 B-216.6. 11 B-703.7.2.1) z
<br /> ~ STORAGE: PERSON TO ENTER HIS OR HER OWN PERSONAL IDENTIFICATION NUMBER OR ANY 6. SPEECH SHALL BE CAPABLE OF BEING REPEATED OR INTERRUPTED. VOLUME
<br /> CHECKOUT COUNTERS: �
<br /> cin OTHER PERSONAL INFORMATION NECESSARY TO PROCESS THE TRANSACTION IN A CONTROL SHALL BE PROVIDED FOR THE SPEECH FUNCTION. LU r\
<br /> 1. WHERE BINS ARE PROVIDED FOR ENVELOPES, WASTE PAPER, OR OTHER PURPOSES, MANNER THAT PROVIDES THE OPPORTUNITY FOR THE SAME DEGREE OF PRIVACY 7. WHERE RECEIPTS ARE PROVIDED, SPEECH OUTPUT DEVICES SHALL PROVIDE AUDIBLE 1. WHERE CHECK-OUT AISLES ARE PROVIDED, ACCESSIBLE CHECK-OUT AISLES SHALL BE PROVIDED IN QO \
<br /> w AT LEAST ONE OF EACH TYPE SHALL BE ACCESSIBLE. INPUT AND OUTPUT AVAILABLE TO ALL INDIVIDUALS. BALANCE INQUIRY INFORMATION, ERROR MESSAGES, AND ALL OTHER INFORMATION ACCORDANCE WITH TABLE 1113-227.2. WHERE CHECK-OUT AISLES SERVE DIFFERENT FUNCTIONS,
<br /> :2 2. A CLEAR FLOOR OR GROUND SPACE SHALL BE PROVIDED. ON THE PRINTED RECEIPT NECESSARY TO COMPLETE OR VERIFY THE TRANSACTION. ACCESSIBLE CHECK-OUT AISLES SHALL BE PROVIDED IN ACCORDANCE WITH TABLE 1113-227.2 FOR o
<br /> 0_ OO OO OO OO ®OO 3 STORAGE ELEMENTS SHALL COMPLY WITH AT LEAST ONE OF THE REQUIRED FUELING POINT OF SALES DEVICES: 8. AT LEAST
<br /> EACH OTIE TACTILELY ON. WHERE PROVIDED, SURFACES AREOFACCESSIBLE HE
<br /> DISCERNIBLE
<br /> CONTROL
<br /> ES NOT ON ACTIVE PROVIDED
<br /> OR FUNCTION.KH 0 T AISLES SHALLBE DISPERSED. THROUGHOUT THE BUILDING OR FACILITY,
<br /> ACCESSIBLE REACH RANGESFUNCTION.
<br /> `n 4. OPERABLE PARTS SHALL BE OPERABLE WITH ONE HAND AND SHALL NOT REQUIRE 1. WHERE A SINGLE POINT-OF-SALE DEVICE IS INSTALLED FOR USE WITH ANY TYPE OF DISPLAY SCREENS, SHALL BE RAISED ABOVE SURROUNDING SURFACES. WHERE2. CHECKOUT COUNTER SURFACE HEIGHT SHALL BE 38 INCHES MAXIMUM ABOVE THE FINISH FLOOR OR Q a a a a a a a
<br /> 36" MIN.
<br /> TIGHT GRASPING, PINCHING, OR TWISTING OF THE WRIST. THE FORCE REQUIRED TO MOTOR FUEL, IT SHALL COMPLY WITH 1, 2, 3 AND 16. MEMBRANE KEYS ARE THE ONLY METHOD OF INPUT, EACH SHALL BE TACTILELY GROUND. THE TOP OF THE COUNTER EDGE PROTECTION SHALL BE 2 INCHES MAXIMUM ABOVE THE TOP
<br /> 00 O®O O O O ACTIVATE OPERABLE PARTS SHALL BE 5 POUNDS 2. WHERE MORE THAN ONE POINT-OF-SALE DEVICE IS INSTALLED FOR USE WITH A DISCERNIBLE FROM SURROUNDING SURFACES AND ADJACENT KEYS. OF THE COUNTER SURFACE ON THE AISLE SIDE OF THE CHECK-OUT COUNTER.
<br /> o SPECIFIC TYPE OF MOTOR FUEL, A MINIMUM OF TWO FOR THAT TYPE SHALL COMPLY 9. NUMERIC KEYS SHALL BE ARRANGED IN A 12-KEY ASCENDING OR DESCENDING 24" MIN. 3. WHEN NOT ALL CHECK-OUT AISLES ARE ACCESSIBLE, ACCESSIBLE CHECK-OUT AISLES SHALL BE
<br /> N OO OO ® O O® SINGLE ATM: WITH 3. POINT1 OF-SALE SYSTEMS THAT INCLUDE A VIDEO TOUCH SCREEN OR ANY OTHER FROM TOHEEOTHERADE LAYOUT. THE NUMBER FIVE KEY SHALL BE TACTILELY DISTINCT ALTERATIONS IDENTIFIED BY A SIGN CLEARLY VISIBLE TO A PERSON IN A WHEELCHAIR DISPLAYING THE INTERNATIONAL
<br /> M 1. WHERE ONE AUTOMATIC TELLER MACHINE OR FARE MACHINE IS PROVIDED AT A NON-TACTILE KEYPAD SHALL BE EQUIPPED WITH A TACTILELY DISCERNIBLE 10. FUNCTION KEYS SHALL CONTRAST VISUALLY FROM BACKGROUND SURFACES. x SYMBOL OF ACCESSIBILITY. THE SIGN SHALL BE A MINIMUM OF 4 INCHES BY 4 INCHES
<br /> 12-KEY 12-KEY LOCATION, IT SHALL COMPLY WITH ALL REQUIREMENTS LISTED: NUMERICAL KEYPAD SIMILAR TO A TELEPHONE KEYPAD CONTAINING A RAISED DOT CHARACTERS AND SYMBOLS ON KEY SURFACES SHALL CONTRAST VISUALLY FROM
<br /> WITH A DOT BASE DIAMETER BETWEEN 1.5 MM AND 1.6 MM AND A HEIGHT BETWEEN KEY SURFACES. VISUAL CONTRAST SHALL BE EITHER LIGHT-ON-DARK OR SALES AND SERVICE COUNTERS:
<br /> 3 ASCENDING DESCENDING iv
<br /> o TWO ATMS: 0.6 MM AND 0.9 MM ON THE NUMBER 5 KEY THAT ENABLES A VISUALLY IMPAIRED DARK-ON-LIGHT.
<br /> c14 PERSON TO ENTER HIS OR HER OWN PERSONAL IDENTIFICATION NUMBER OR ANY 11. FUNCTION KEY SURFACES SHALL HAVE TACTILE SYMBOLS AS FOLLOWS: ENTER OR 1. WHERE PROVIDED, AT LEAST ONE OF EACH TYPE OF SALES COUNTER AND SERVICE COUNTER SHALL BE
<br /> < 1. WHERE TWO AUTOMATIC TELLER MACHINES OR FARE MACHINES ARE PROVIDED AT A OTHER PERSONAL INFORMATION NECESSARY TO PROCESS THE TRANSACTION IN A PROCEED KEY: RAISED CIRCLE; CLEAR OR CORRECT KEY: RAISED LEFT ARROW; ACCESSIBLE. WHERE COUNTERS ARE DISPERSED THROUGHOUT THE BUILDING OR FACILITY, ACCESSIBLE
<br /> CqI LOCATION, ONE SHALL COMPLY WITH ALL REQUIREMENTS LISTED AND ONE SHALL MANNER THAT PROVIDES THE OPPORTUNITY FOR THE SAME DEGREE OF PRIVACY CANCEL KEY: RAISED LETTER EX; ADD VALUE KEY: RAISED PLUS SIGN; DECREASE COUNTERS ALSO SHALL BE DISPERSED. Q
<br /> o COMPLY WITH 4-11, 16 AND 17 INPUT AND OUTPUT AVAILABLE TO ALL INDIVIDUALS. VALUE KEY: RAISED MINUS SIGN. 2. THE ACCESSIBLE PORTION OF THE COUNTER TOP SHALL EXTEND THE SAME DEPTH AS THE SALES OR
<br /> 12. THE DISPLAY SCREEN SHALL BE VISIBLE FROM A POINT LOCATED 40 INCHES ABOVE COUNTER Q SERVICE COUNTER TOP. Q W
<br /> THREE + ATMS: ATM/POINT OF SALE REQUIREMENTS: THE CENTER OF THE CLEAR FLOOR SPACE IN FRONT OF THE MACHINE. - - - 3. IN ALTERATIONS, WHEN THE PROVISION OF A COUNTER COMPLYING WITH SECTION 1113-904.4 WOULD
<br /> 13. WHERE DISPLAY SCREENS ARE MOUNTED VERTICALLY OR TIPPED AWAY FROM THE RESULT IN A REDUCTION OF THE NUMBER OF EXISTING COUNTERS, THE COUNTER SHALL BE PERMITTED Q
<br /> 00
<br /> Cn 1. WHERE THREE OR MORE AUTOMATIC TELLER MACHINES OR FARE MACHINES ARE 1. A CLEAR FLOOR OR GROUND SPACE SHALL BE PROVIDED. VIEWER LESS THAN 30 DEGREES, THE CENTER LINE OF THE DISPLAY SCREEN AND TO HAVE A PORTION WHICH IS 24 INCHES LONG MINIMUM ACCESSIBLE, PROVIDED THAT THE REQUIRED lr Z
<br /> col PROVIDED AT A LOCATION, AT LEAST 50 PERCENT SHALL COMPLY WITH ALL 2. CONTROLS SHALL BE OPERABLE WITH ONE HAND AND SHALL NOT REQUIRE TIGHT OTHER DISPLAY DEVICES SHALL BE NO MORE THAN 52 INCHES ABOVE THE FLOOR
<br /> CLEAR FLOOR OR GROUND SPACE IS CENTERED ON THE ACCESSIBLE LENGTH OF THE COUNTER.
<br /> REQUIREMENTS AND THE REST SHALL COMPLY WITH 4-11, 16 AND 17 GRASPING, PINCHING, OR TWISTING OF THE WRIST. THE FORCE REQUIRED TO OR GROUND SURFACE. > co
<br /> vii ~ ACTIVATE OPERABLE PARTS SHALL BE 5 POUNDS. 14. WHERE DISPLAY SCREENS ARE MOUNTED TIPPED AWAY FROM THE VIEWER 30 4. A PORTION OF THE COUNTER SURFACE THAT IS 36 INCHES LONG MINIMUM AND 34 INCHES HIGH
<br /> = a MAXIMUM ABOVE THE FINISH FLOOR SHALL BE PROVIDED. A CLEAR FLOOR OR GROUND SPACE SHALL BE Q O
<br /> c�cn a POINT OF SALES DEVICES: 3. OPERABLE PARTS SHALL BE WITHIN AN ACCESSIBLE REACH RANGE. DEGREES TO LESS THAN 60 DEGREES FROM VERTICAL, THE CENTER LINE OF THE Q
<br /> z w w e - - - - - - POSITIONED FOR A PARALLEL APPROACH ADJACENT TO THE 36 INCH MINIMUM LENGTH OF COUNTER. LO
<br /> � _ J o 4. AUTOMATIC TELLER MACHINES SHALL PROVIDE THE OPPORTUNITY FOR THE SAME DISPLAY SCREEN AND OTHER DISPLAY DEVICES SHALL BE NO MORE THAN 44 5. WHERE THE PROVIDED COUNTER SURFACE IS LESS THAN 36 INCHES LONG, THE ENTIRE COUNTER 0)
<br /> 1. WHERE POINT-OF-SALE DEVICES ARE PROVIDED, ALL DEVICES AT EACH LOCATION DEGREE OF PRIVACY OF INPUT AND OUTPUT AVAILABLE TO ALL INDIVIDUALS. INCHES ABOVE THE FLOOR OR GROUND SURFACE. /� Q
<br /> D =ma SHALL COMPLY WITH 2, 3, AND 16_ 5. MACHINES SHALL BE SPEECH ENABLED. OPERATING INSTRUCTIONS AND ORIENTATION, 15. WHERE DISPLAY SCREENS ARE MOUNTED TIPPED AWAY FROM THE VIEWER 60 SURFACE SHALL BE 34 INCHES HIGH MAXIMUM ABOVE THE FINISH FLOOR. W
<br /> SALES/SERVICE COUNTER CHECK-OUT AISLE COUNTER
<br /> o' 6. WHERE COUNTERS OR TELLER WINDOWS HAVE SECURITY GLAZING TO SEPARATE PERSONNEL FROM THE
<br /> O Q O w 2. WHERE POINT-OF-SALE DEVICES ARE PROVIDED AT ACCESSIBLE CHECK STANDS AND VISIBLE TRANSACTION PROMPTS, USER INPUT VERIFICATION, ERROR MESSAGES, AND DEGREES TO 90 DEGREES (HORIZONTAL) FROM VERTICAL, THE CENTER LINE OF THE O
<br /> 0 ~� SALES AND SERVICE COUNTERS, THEY SHALL COMPLY WITH 1, 2, 3 AND 16. ALL DISPLAYED INFORMATION FOR FULL USE SHALL BE ACCESSIBLE TO AND DISPLAY SCREEN AND OTHER DISPLAY DEVICES SHALL BE NO MORE THAN 34 PUBLIC, A METHOD TO FACILITATE VOICE COMMUNICATION SHALL BE PROVIDED O /
<br /> O 3. POINT-OF-SALE SYSTEMS THAT INCLUDE A VIDEO TOUCH SCREEN OR ANY OTHER INDEPENDENTLY USABLE BY INDIVIDUALS WITH VISION IMPAIRMENTS. SPEECH SHALL INCHES ABOVE THE FLOOR OR GROUND SURFACE. V
<br /> ~ ATM REACH HEIGHT NON-TACTILE KEYPAD SHALL BE EQUIPPED WITH A TACTILELY DISCERNIBLE BE DELIVERED THROUGH A MECHANISM THAT IS READILY AVAILABLE TO ALL USERS, 16. CHARACTERS DISPLAYED ON THE SCREEN SHALL BE IN A SANS SERIF FONT. FOOD SERVICE LINES:
<br /> NUMERICAL KEYPAD SIMILAR TO A TELEPHONE KEYPAD CONTAINING A RAISED DOT INCLUDING BUT NOT LIMITED TO, AN INDUSTRY STANDARD CONNECTOR OR A CHARACTERS SHALL BE 3/16 INCH HIGH MINIMUM BASED ON THE UPPERCASE In
<br /> Q
<br /> WITH A DOT BASE DIAMETER BETWEEN 1.5 MM AND 1.6 MM AND A HEIGHT BETWEEN TELEPHONE HANDSET. SPEECH SHALL BE RECORDED OR DIGITIZED HUMAN, OR LETTER "I". CHARACTERS SHALL CONTRAST WITH THEIR BACKGROUND WITH EITHER 1. WHERE SELF-SERVICE SHELVES ARE PROVIDED, AT LEAST 50 PERCENT, BUT NO FEWER THAN ONE, OF W / 1
<br /> N 0.6 MM AND 0.9 MM ON THE NUMBER 5 KEY THAT ENABLES A VISUALLY IMPAIRED SYNTHESIZED. LIGHT CHARACTERS ON A DARK BACKGROUND OR DARK CHARACTERS ON A LIGHT EACH TYPE PROVIDED SHALL COMPLY WITH REQUIRED REACH RANGES. O W '� W
<br /> ATMS AND POINTS OF SALE BACKGROUND. COUNTERS 2• THE TOPS OF TRAY SLIDES SHALL BE 28 INCHES MINIMUM AND 34 INCHES MAXIMUM ABOVE THE FINISH - w .�.
<br /> cl 17. BRAILLE INSTRUCTIONS FOR INITIATING THE SPEECH MODE SHALL BE PROVIDED. FLOOR OR GROUND. `rJ^J
<br /> 19 SCALE: N.T.S. (1113-220. 1113-707) 7 SCALE: N.T.S. 1113-904 U Z
<br /> J QQ
<br /> Q I„L CC`
<br /> ELECTRICAL REACHES: 60" MIN. 60" MIN. - - O Z L
<br /> U
<br /> � 1. CONTROLS AND SWITCHES INTENDED TO BE USED BY THE OCCUPANT OF A ROOM OR AREA TO _ � � Q
<br /> = CONTROL LIGHTING AND RECEPTACLE OUTLETS, APPLIANCES OR COOLING, HEATING AND W
<br /> Z VENTILATING EQUIPMENT, SHALL COMPLY WITH SECTION 1113-308 EXCEPT THE LOW REACH SHALL - - N
<br /> a f-(
<br /> a xa BE MEASURED TO THE BOTTOM OF THE OUTLET BOX AND THE HIGH REACH SHALL BE MEASURED \ z
<br /> o in Q x TO THE TOP OF THE OUTLET BOX. _ Q Q z z x
<br /> - - M - 2. ELECTRICAL RECEPTACLE OUTLETS ON BRANCH CIRCUITS OF 30 AMPERES OR LESS AND / g o
<br /> z - . - COMMUNICATION SYSTEM RECEPTACLES SHALL COMPLY WITH SECTION 1113-308 EXCEPT THE LOW
<br /> M REACH SHALL BE MEASURED TO THE BOTTOM OF THE OUTLET BOX AND THE HIGH REACH SHALL 0 00
<br /> BE MEASURED TO THE TOP OF THE OUTLET BOX. ` z 48" MIN. 36" MIN.
<br /> N
<br /> / �_
<br /> L - - J
<br /> FORWARD REACH: _L_ BASE_ 30" MIN. _ -
<br /> REACH DEPTH REACH DEPTH REACH DEPTH 1. WHERE A FORWARD REACH IS UNOBSTRUCTED, THE HIGH FORWARD REACH SHALL BE 48 INCHES 36" MIN.
<br /> < 10 MAX. 10 MAX. 10 to 24 MAX. MAXIMUM AND THE LOW FORWARD REACH SHALL BE 15 INCHES MINIMUM ABOVE THE FINISHFORWARD PARALLEL A O Project Number
<br /> o FLOOR OR GROUND. 12" MIN. 12" MIN. x
<br /> 2. WHERE A HIGH FORWARD REACH IS OVER AN OBSTRUCTION, THE CLEAR FLOOR SPACE SHALL L - L o SPA16002.0 SIDE REACH EXTEND BENEATH THE ELEMENT FOR A DISTANCE NOT LESS THAN THE REQUIRED REACH DEPTH CIRCULAR SPACE T-SHAPED SPACE
<br /> Q OVER THE OBSTRUCTION. THE HIGH FORWARD REACH SHALL BE 48 INCHES MAXIMUM WHERE THE 60" MIN.
<br /> U REACH DEPTH IS 20 INCHES MAXIMUM. WHERE THE REACH DEPTH EXCEEDS 20 INCHES, THE HIGH
<br /> CLEAR FLOOR SPACE NOTES:
<br /> z REACH DEPTH REACH DEPTH FORWARD REACH SHALL BE 44 INCHES MAXIMUM AND THE REACH DEPTH SHALL BE 25 INCHES ALCOVE Sheet Name
<br /> QMAXIMUM. TURNING SPACE NOTES:
<br /> M 20 MAX. GREATER THAN 1. SLOPES NOT STEEPER THAN 1:48 SHALL BE PERMITTED.
<br /> 20" to 25' MAX.
<br /> � SIDE REACH: 1. SLOPES NOT STEEPER THAN 1:48 SHALL BE PERMITTED. 2. THE CLEAR FLOOR OR GROUND SPACE SHALL BE 30 INCHES MINIMUM BY 48 INCHES
<br /> N ACCESSIBILITY
<br /> 2. CIRCLE TURNING SPACE SHALL BE A SPACE OF 60 INCHES DIAMETER MINIMUM. THE MINIMUM.
<br /> SPACE SHALL BE PERMITTED TO INCLUDE KNEE AND TOE CLEARANCE. 3. UNLESS OTHERWISE SPECIFIED, CLEAR FLOOR OR GROUND SPACE SHALL BE PERMITTED
<br /> X 1. WHERE A CLEAR FLOOR OR GROUND SPACE ALLOWS A PARALLEL APPROACH TO AN ELEMENT SHEET
<br /> Q x 3. T-SHAPED TURNING SPACE SHALL BE WITHIN A 60 INCH SQUARE MINIMUM WITH ARMS TO INCLUDE KNEE AND TOE CLEARANCE.
<br /> AND THE SIDE REACH IS UNOBSTRUCTED, THE HIGH SIDE REACH SHALL BE 48 INCHES MAXIMUM
<br /> q AND BASE 36 INCHES WIDE MINIMUM. EACH ARM OF THE T SHALL BE CLEAR OF 4. UNLESS OTHERWISE SPECIFIED, CLEAR FLOOR OR GROUND SPACE SHALL BE POSITIONED
<br /> AND THE LOW SIDE REACH SHALL BE 15 INCHES MINIMUM ABOVE THE FINISH FLOOR OR GROUND.
<br /> Cn
<br /> 00 " 2. AN OBSTRUCTION SHALL BE PERMITTED BETWEEN THE CLEAR FLOOR OR GROUND SPACE AND THE OBSTRUCTIONS 12 INCHES MINIMUM IN EACH DIRECTION AND THE BASE SHALL BE FOR EITHER FORWARD OR PARALLEL APPROACH TO AN ELEMENT.
<br /> D ELEMENT WHERE THE DEPTH OF THE OBSTRUCTION IS 10 INCHES MAXIMUM. CLEAR OF OBSTRUCTIONS 24 INCHES MINIMUM. THE SPACE SHALL BE PERMITTED TO 5. ONE FULL UNOBSTRUCTED SIDE OF THE CLEAR FLOOR OR GROUND SPACE SHALL
<br /> D 3. OPERABLE PARTS OF FUEL DISPENSERS SHALL BE PERMITTED TO BE 54 INCHES MAXIMUM INCLUDE KNEE AND TOE CLEARANCE ONLY AT THE END OF EITHER THE BASE OR ONE ADJOIN AN ACCESSIBLE ROUTE OR ADJOIN ANOTHER CLEAR FLOOR OR GROUND SPACE.
<br /> co
<br /> o MEASURED FROM THE SURFACE OF THE VEHICULAR WAY WHERE FUEL DISPENSERS ARE INSTALLED ARM. CLEAR FLOOR OR GROUND SPACE MAY OVERLAP AN ACCESSIBLE ROUTE, UNLESS
<br /> I- ON EXISTING CURBS. 4. DOORS SHALL BE PERMITTED TO SWING INTO TURNING SPACES UNLESS AS SPECIFIED SPECIFICALLY PROHIBITED. r--. 03.16.17
<br /> a- FORWARD REACH OVER OBSTRUCTIONS 4. WHERE A CLEAR FLOOR OR GROUND SPACE ALLOWS A PARALLEL APPROACH TO AN ELEMENT FOR RESTROOMS AND FITTING ROOMS. 6. ALCOVES SHALL BE 36 INCHES WIDE MINIMUM WHERE THE DEPTH EXCEEDS 24 INCHES.
<br /> I- AND THE HIGH SIDE REACH IS OVER AN OBSTRUCTION, THE HEIGHT OF THE OBSTRUCTION SHALL 7. ALCOVES SHALL BE 60 INCHES WIDE MINIMUM WHERE THE DEPTH EXCEEDS 15 INCHES. Sheet Number
<br /> w BE 34 INCHES MAXIMUM AND THE DEPTH OF THE OBSTRUCTION SHALL BE 24 INCHES MAXIMUM.
<br /> REACH RANGES THE HIGH SIDE REACH SHALL BE 48 INCHES MAXIMUM FOR A REACH DEPTH OF 10 INCHES TURING SPACE CLEAR FLOOR SPACE
<br /> w MAXIMUM. WHERE THE REACH DEPTH EXCEEDS 10 INCHES, THE HIGH SIDE REACH SHALL BE 46 (.8�sCA�LENI.
<br /> 16 SCALE: N.T.S. 1113-308 INCHES MAXIMUM FOR A REACH DEPTH OF 24 INCHES MAXIMUM. .S. 1113-304 SCALE: N.T.S. 1113-305
<br /> z
<br />
|