Laserfiche WebLink
In-N-Out Burgers NGF 255 Progate Drive Thru Installation Manual <br />© 2011, IMI Cornelius Inc.- 5 -Publication Number: 621058475INS <br />INSTALLATION <br />MOUNTING AND PLACEMENT <br />To the Installer <br />!WARNING: <br />It is the responsibility of the Installer to ensure that the water supply to the dispensing equipment is provided with <br />protection against backflow by an air gap as defined in ANSI/ASME A112. 1.2–1979; or an approved vacuum breaker <br />or other such method as proved effective by test and must comply with all Federal, state and local codes. Failure to <br />comply could result in serious Injury, Death or damage to the equipment. <br />Water pipe connections and fixtures directly connected to a potable water supply shall be sized, installed, and <br />maintained according to Federal, State, and Local laws. <br />1. Locate the dispenser indoors on a level counter top. <br />A.LEG OPTION <br />Unpack the four (4) legs and install them into the threaded holes provided in the bottom of the unit. The <br />installer must provide flexibility in the product and utility supply to permit shifting the position of the dis- <br />penser sufficiently to clean the area beneath it. <br />Counter Mounting <br />The ice drink dispenser must be sealed to the counter. The template drawing indicates where openings can be cut in <br />the counter. Locate the desired position for the dispenser, then mark the outline dimensions on the counter using the <br />template drawings. Cut openings in counter. <br />NOTE: Recommended counter opening size 9” x 12” for utilities and beverage tubing. Opening can be <br />located anywhere within shaded area. <br />Figure 2. <br />30 <br />26 3/81 13/16 <br />15/16 <br />18 5/8 <br />12 <br />9 <br />31/2 <br />91/2 11 <br />23 <br />21 1/4 <br />30 <br />31 1/2 <br />REMOVABLE SINK <br />7/16 DIA. <br />23 1/16 <br />ZStyle