WORK PLANS - Laserfiche WebLink

Home Browse Search

In-N-Out Burgers NGF 255 Progate Drive Thru Installation Manual Publication Number: 621058475INS - 10 -© 2011, IMI Cornelius Inc. OPERATION INSTRUCTIONS UNIT OPERATION !WARNING: The unit must be electrically grounded to avoid possible fatal electrical shock or serious injury to the operator. The unit power cord is equipped with a three-prong plug. If a three-hole (grounded) electrical outlet is not available, use an approved method to ground the unit. Failure to ground the unit could result in serious Injury, Death or Damage to the Equipment. CAUTION:! Never operate the carbonator pump with the water inlet supply line shutoff valve closed. “Dry running” the water pump will burn out the pump. A pump damaged in this manner is not covered by warranty. 1. Connect electrical power to the Unit. 2. Locate the switch on the junction box of the carbonator pump, and turn it ON. The water pump will start and fill the carbonator tank with carbonated water. The water pump will stop when the carbonator tank is full. 3. Check for water and CO2 leaks, and tighten any loose connections 4. Dispense several drinks until the carbonator pump cycles on. The refill time should be about 5-7 seconds. 5. If the carbonator pump appears to be short-cycling, meaning a refill time of 1-2 seconds, refer to the Trouble- shooting section in the back of this manual. PROGATE 2 CONTROL BOX OPERATION Portion Control Box Functions The portion control box on the PROGATE 2 has several functions including dispensing 4 programmed ice portions for 4 cup sizes, programming and a manual dispense mode. 1.Main Power ON OFF: Turns power to the entire machine off. Lights Orange when ON. 2.Agitator Push ON: Turns on agitator and opens ice gate allowing continuous dispense. This button will turn green in the manual mode and be off in PROGATE automatic. This button will also agitate in the automatic mode but not dispense ice. 3.Mode Switch Manual/Progate: Turns on agitator and opens ice gate allowing unlimited ice portion. 4.Program Button: The programming button is used with cup size button enabling the user to enter the portion programming mode to adjust the ice portions. The programming button is used with the directional arrow but- tons to adjust the agitation time. 5.Ice Portion Dispense Buttons: Used to dispense the appropriate ice portion. Can also be used in conjunction with the program button to program a portion size. 1 2 3 6 5 7 8 4 1. MAIN POWER ON/OFF 2. AGITATOR PUSH ON 3. MODE SWITCH MANUAL/PROGATE 4. PROGRAM BUTTON 5. ICE PORTION DISPENSE BUTTONS 6. ICE PORTION BAR 7. PROGATE ON LIGHT 8. PORTION SIZE UP/DOWN KEYS