Laserfiche WebLink
In-N-Out Burgers NGF 255 Progate Drive Thru Installation Manual <br />© 2011, IMI Cornelius Inc.- 11 -Publication Number: 621058475INS <br />6.Ice Size Program Bar: The program bar is only active in the program mode as a visual aid in setting the portion <br />size. <br />7.Light: On start up of the unit or during a mode change (Manual to Progate) this light turns orange to inform the <br />user that the unit is going through a self diagnostic test. On completion of this test the light turns green to <br />inform the user that the machine is ready to dispense. If the light remains solid on red and the unit is not dis- <br />pensing any ice when an ice portion is pressed this should generate a service call. During ice dispense if there <br />is insufficient ice in the ice chute then the light turns red instantaneously to inform the user that there is insuffi- <br />cient ice. Once the user releases the portioned button then the red light goes out. <br />8.Portion Up/Down Buttons: The program bar is only active in the program mode to change the ice dispense pro- <br />gram size. <br />Programming (Changing) the Ice Portion <br />To change the size of any of the four ice dispense sizes follow the steps below. <br />1. To enter the program mode press the Program Button and Desired Size button at the same time and <br />hold for 5 seconds. <br />2. The Ice Portion Bar will come on. <br />3. Press the UP ARROW button to increase the amount of dispensed ice. The LED will move towards the <br />right indicating the Ice Portion has been increased. <br />4. Press the DOWN ARROW button to decrease the amount of dispensed ice. The LED will move towards <br />the left indicating the Ice Portion has been decreased. <br />5. To exit the program mode press the Desired Size button or wait 10 seconds and the control will return to <br />the dispense mode. <br />6. Place a cup under the ice chute and press the just programmed dispense size button. If amount dispense <br />amount is not the desired amount repeat the process. <br />Agitation Time <br />The software coding for the progate system involves a direct relationship between the dispense time and the agitation <br />time. <br />Dispense Rime <br />(mS)Agitation Ratio Agitation Time <br />(mS) <br />50 10 500 <br />70 10 700 <br />90 10 900 <br />110 10 1100 <br />130 10 1300 <br />150 10 1500 <br />170 10 1700 <br />190 10 1900 <br />210 10 2100 <br />230 10 2300