Laserfiche WebLink
the fryer must be supplied with a connector that <br />complies with all state and local installation codes. <br />a ny appliance that is not furnished with a power <br />supply cord but that includes a set of casters must be <br />tethered. adequate means must be provided to limit <br />the movement of this appliance without depending <br />on or transmitting stress to the electrical conduit. <br />the following requirements apply: <br />1. Casters must be a maximum height of 4-inches (102mm). <br />2. Such mobile appliances must be installed with the <br />use of a flexible connector secured to the building <br />structure. <br />a mounting connector for a restraining device is <br />located on the lower back flange of the appliance <br />chassis, approximately 7-inches (178mm) from the <br />floor. A flexible connector is not supplied by nor is <br />it available from the factory. <br />RESTRAINT REQUIREMENTS - MObILE EQUIPMENT <br />INSTALLATION <br />Gas Fryer Operation & Care Manual • 9 <br /> wARNING <br />RISK OF ELECTRIC SHOCK. <br />Appliance must be secured <br />to building structure. <br />igntionalarm <br />masterpowerswitch <br />controlreset <br />oilhi-limitreset <br />open <br />closed <br />kettle drainselector <br />ASF-60G, 120V <br />CONTROLS bEHINd ACCESS PANEL