Laserfiche WebLink
15 <br />PROGRAMMING THE DISPENSER <br />Remove the lower splash guard assembly to access the digital programming module with LCD display. <br />Press the Down Arrow key to inter the programming menu. <br />Use the Up and Down Arrow keys to scroll through the menu screens. <br />Select Exit to leave the programming function and return to normal operations. <br />NOTE 1: Flashing menu items indicate which selection is active. <br />NOTE 2: Values shown below are the factory default values for English units. <br />NOTE 3: Values in [X - X] are the Min. and Max. for that function. <br />TANK TEMP XXX <br />CABINET TEMP XX <br /> <br />L DISPENSE RATIO <br />(-) 35:1 (+) <br />SET LF TUBE SIZE <br />1/8 EXIT 3/16 <br />R DISPENSE RATIO <br />(-) 35:1 (+) <br />SET RT TUBE SIZE <br />1/8 EXIT 3/16 <br />FLAVOR GUARD ? <br />NO EXIT YES <br /> MENU SCREEN ACTION DESCRIPTION <br />LF TASTE OK ? <br />NO EXIT YES <br />FIND LF TARGET <br />PULL DISPENSE <br />RT TASTE OK ? <br />NO EXIT YES <br /> FIND RT TARGET <br />PULL DISPENSE <br />If NO - go to LF DISP VOLUME menu. <br />Use the Down Arrow Key <br />to enter Programming <br />Functions <br />Use the (+) or (-) buttons to <br />adjust the Mix Ratio <br />Select tube size. <br />Use the (+) or (-) buttons to <br />adjust the Mix Ratio <br />Select tube size. <br />Select (YES) to activate. <br />Select (NO) to deactivate. <br />Select (YES) or (NO) <br />Place a 16 Oz. (500 mL) <br />cup under the Left dispense <br />tip, then activate the Left <br />dispenser <br />Select (YES) or (NO) <br />Place a 16 Oz. (500 mL) cup <br />under the Right dispense <br />tip, then activate the Right <br />dispenser <br />Normal Display for LCR models. <br /> <br />Enter the desired Mix Ratio for the concentrate <br />used in the Left dispenser. [20:1 - 100:1] <br />Enter Pump Tube Size to be used in the Left <br />metering pump, (see Tube Selection Chart) <br />Enter the desired Mix Ratio for the concentrate <br />used in the Right dispenser. [20:1 - 100:1] <br />Enter Pump Tube Size to be used in the Right <br />metering pump, (see Tube Selection Chart) <br />Select Yes, if you are ready to calibrate the Flavor <br />Guard sensor. Select NO, if you do not wish to <br />use this feature, (see Flavor Guard) <br />Select YES, if you have dispensed several cups <br />and are satisfied with the Left dispenser flavor. <br />Select NO, if you have not run taste test. <br />Calibrates the Left FlavorGard™ sensor to the <br />current MixProfile. The dispenser will shut OFF <br />automatically when finished. <br />Select YES, if you have dispensed several cups <br />and are satisfied with the Right dispenser flavor. <br />Select NO, if you have not run taste test. <br />Calibrates the Right FlavorGard™ sensor to the <br />current MixProfile. The dispenser will shut OFF <br />automatically when finished. <br />36026.1 010313 <br />RELEASED FOR PRODUCTION <br />DIR Num: 36026.0001 19, May 2015