Laserfiche WebLink
OWNER INFORMATION <br />• Normal operation load 450 lbs, maximum 600 lbs. The lifting tongue can go as high as 29 <br />inches from ground level. All components used on this power lift are corrosion resistant. <br />• This manual provides the safety, installation, and operating procedures for the power <br />lift. We recommend that all information contained in this manual be read prior to <br />installing and operating the unit. <br />• Warranty information <br />• Please read the full text of the Limited Warranty printed on the back of this manual. <br />• If the unit arrives damaged, contact the carrier immediately and file a damage claim <br />with them. Save all packing materials when filing a claim. Freight damage claims are the <br />responsibility of the purchaser and are not covered under warranty. <br />IMPORTANT SAFETY INFORMATION <br />• In addition to the warnings and cautions in this manual, use the following guidelines for <br />safe operation of the unit. <br />• Read all instructions before using equipment. <br />• For your safety, the equipment is furnished with a properly grounded cord connector. <br />Do NOT attempt to defeat the grounded connector. <br />• Install or locate the equipment only for its intended use as described in this manual. <br />Do NOT use corrosive chemicals in the equipment. <br />• Do NOT operate this equipment if it has a damaged cord or plug, if it is not working <br />properly, or if it has been damaged. <br />• This equipment should be serviced by qualified personnel only. <br />• Do NOT immerse cord or plug in water. <br />• Keep cord away from heated surfaces. <br />• The following warnings and cautions appear throughout this manual should be carefully <br />observed. <br />• Unplug the power cord, and make sure the lifting tongue is all the way down before <br />performing any electrical service or maintenance. <br />• The equipment should be grounded according to local electrical codes to prevent the <br />possibility of electrical shock. It requires a grounded receptacle with separate electrical <br />lines, protected by fuses or circuit breaker of the proper rating. <br />• If fuse blow and needs to be replace contact Doughpro for repair. <br />• All electrical connections must be in accordance with local electrical codes and any <br />other applicable codes. <br />• Electrical ground is required on this machine. <br />• Do NOT modify the power supply cord plug. If it does not fit the outlet, have a proper <br />outlet installed by a qualified electrician.