COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

EMCG A1100 On Site Upright WHEATON RETAIL Functional Test Procedure Step 3 : Place a 9/64" alien Reauired Tools : wrench into the plug socket and attempt to turn the wrench • A0081 Adapter Wrench counterclockwise . If the wrench • 1 /8 " Allen Wrench turns 5 degrees or less , the • 9/64" Allen Wrench primary flapper valve is in the • Standard Screwdriver locked (open ) position . r 10 iVI; E " a Primary Flapper valve Step 4 : Use a screwdriver to raise the bottom float. Turn the a -- Plug & alien wrench 90 degrees coup - -,.. Test Screw terclockwise placing the prima - � . ry flapper valve in the closed position . While the flapper is in the Step 1 : Using the Emco Wheaton A0081 Adapter closed position , move the float Wrench , remove the cap and adapter. Raise valve up and release . It should rise assembly out of tank as shown . Use an assistant to and fall smoothly. Do this 34 hold the valve in position during the test . times to insure proper opera- tion . Step 2 : Using a 1 /8" alien wrench , remove the plug from the valve . D J 0 O F Step 5 : Remove the screwdriver to release the float. Rotate the alien wrench to the original position . You should hear and/or feel the flapper valve relatch back to the open position . Retest following Step 4 . Step 6 : Re-insert the alien wrench . Attempt to turn the 9/64 alien wrench counterclockwise to check if the flap- F Y per is in the locked position . If the primary flapper valve is locked , the valve is in proper working order. _ Step 7 : Re - insert the plug securely into the valve , using the 1 /8" alien wrench . Emco Wheaton Retail Corp . 2300 Industrial Park Dr. • Wilson , NC 27893 • 252-243-0150 • 252-243-4759 (fax) www, emcoretaii . com TP-204 © 2018 Emco Wheaton Retail Corporation Rev B 11 /18