Laserfiche WebLink
METAL FINISHING SOLUTIONS, INC. <br /> the ice chest to maintain the temperature of the samples at 40 C or less until the samples are delivered to <br /> the testing laboratory. All samples will be analyzed by a testing laboratory that is certified by the State of <br /> California. <br /> Each hazardous waste generated at Metal Finishing Solutions, Inc. as shown in Exhibit 1 will be analyzed <br /> initially and periodically thereafter. Initially, most of the wastes will be analyzed under a waste profile <br /> provided by the company's waste disposal company. Other samples may be taken be sampled by and <br /> sent to a State certified laboratory for testing. These initial analyses are shown in Exhibit 4 on the <br /> following page. <br /> Exhibit 2 Initial Waste Analyses <br /> No. Process/Waste1 Analyze for... <br /> 1 Spent process solutions Tank#8 Metals <br /> 2 Concentrated rinsewater Metals <br /> 3 WTS discharge to POTW Metals, inorganics, organics <br /> Ongoing sampling and analyses will be completed for the listed wastes as follows: <br /> ■ Whenever the chemical makeup of the hazardous waste changes significantly (22 CCR <br /> 566265.200 and 22 CCR 66265.402 (a)(1)) <br /> ■ Whenever the related process significantly changes that may introduce new constituents <br /> or a change in concentration of an existing constituent (22 CCR 566265.200 and22 <br /> CCR 66265.402 (a)(1)) <br /> ■ Whenever new profile analyses are required by the company's disposal company <br /> ■ At least every three years <br /> 1325 EI Pinal Drive Stockton,CA 95205 Tel 408.802.4977 <br />