Laserfiche WebLink
MCO ° All 00 On Site <br /> WHEATON RETAIL Upright Functional Test Procedure <br /> Step 3 : Place a 9/64" # <br /> allen wrench into the ,. <br /> plug socket and <br /> Required Tools : <br /> attempt to turn the <br /> • A0081 Adapter Wrench wrench counterclock- <br /> • 1 /8" Allen Wrench wise . If the wrench will <br /> • 9/64" Allen Wrench not turn , the main flap- <br /> • Standard Screwdriver per valve is in the <br /> locked position . <br /> Step 1 : Using theall <br /> Emco Wheaton ` <br /> A0081 Adapter Step 4 : Use a screw- p1 <br /> Wrench , remove cap n driver to raise the <br /> and adapter. Raise bottom float . Turn the <br /> valve assembly out of _ alien wrench 90 <br /> tank as shown . Use <br /> degrees counterclock- <br /> an assistant to holdwise placing the main11 An <br /> In <br /> nn <br /> the valve in position flapper valve in the <br /> during the test. closed position . <br /> i <br /> IVV <br /> Am <br /> An <br /> An <br /> I <br /> Step 5 : Remove the <br /> screwdriver to release <br /> the float, QuicklyAV <br /> Step 2 : Using a 1 /8" remove the allen <br /> alien wrench , remove <br /> wrench to allow the <br /> the plug from the ; main flapper valve to <br /> valve . , spring back to the <br /> closed position . A . <br /> A . <br /> Step 6 : Re-insert the <br /> alien wrench . AttemptAn <br /> to turn the 9/64" alien11, <br /> A In <br /> ' <br /> wrench counterclock- <br /> wise to check if theAV A <br /> In <br /> flapper is in the lockedAn <br /> position . If the main <br /> VIA flapper valve is locked , the valve is in proper working <br /> order. <br /> Step • Re- insert the plug securely into the valve , <br /> using the 1 /8" allen wrench . <br /> Emco Wheaton Retail Corp . <br /> 2300 Industrial Park Dr. • Wilson , NC 27893 • 252-243-0150 • 252-2434759 (fax) www, emeoretail. com <br />