COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

STEP 19: ELECTRONIC LIQUID LEVEL Standard Product Warranty MONITORING OPW warrants that products sold by it are free from defects in materials and workmanship for a period of one year from the date If an electronic level monitor is installed, it must be of manufacture by OPW(ECO products two years from date of calibrated to match the top of the 61 SO valve body, manufacture.)Proof of purchase may be required. As the which must correlate with 95%of the actual tank exclusive remedy under this limited warranty,OPW,will at its sole capacity. discretion.repair,replace.or issue credit for future orders for any product that may prove defective within the one year date of manufacture period(repairs,replacements,or credits may be PREVENTATIVE MAINTENANCE subject to prorated warranty for remainder of the original warranty Annually, inspect the flapper in the 61 SO to see that period.complete proper warranty claim documentation required.) it is open by looking down the drop tube opening. This warranty shall not apply to any product that has been altered Test the 61 SO drop tube seals with CARE in any way,which has been repaired by any party other than a service representative authorized by OPW,or when failure is due procedure TP-201.1D. If the drop tube seal passes to misuse.or improper installation or maintenance. OPW shall testing, no further maintenance is required. If the have no liability whatsoever for special,incidental or drop tube fails testing, replace the drop tube seal consequential damages to any party,and shall have no liability for with OPW P/N: H11931 M for 4" Tubes. Re-test the the cost of labor,freight,excavation,clean up,downtime, removal.reinstallation,loss of profit,or any other cost or charges. 61 SO drop tube with CARB procedure TP-201.1 D. For any product certified to California 2001 standards.OPW If this does not correct the leak the 61 SO needs to warrants that product sold by it are free from defects in material be replaced. and workmanship for a period of one year from date of manufacture or one year from date of registration of installation not to exceed 15 months from date of manufacture by OPW. CAUTION: Do not insert any foreign object into THIS WARRANTY IS IN LIEU OF ALL OTHER drop tube if flapper is in the closed position. For WARRANTIES,EXPRESS OR IMPLIED,AND SPECIFICALLY le a tank level measuring stick. This will THE WARRANTIES OF MERCHANTABILITY AND FITNESS example g FOR A PARTICULAR PURPOSE. THERE ARE NO damage the valve and void the Warranty. WARRANTIES,WHICH EXTEND BEYOND THE DESCRIPTION ALWAYS check flapper location before ON THE FACE HEREOF. "sticking" the tank. If flapper is in the closed position the tank is either over filled and you need to wait until the liquid level goes down or the 61 SO is damaged and needs to be replaced. 61SO Performance Specifications: This Overfill Prevention Valve has been manufactured and tested to, and met, the following California specifications. Performance Requirement: Leak rate to be less than or equal to 0.17 CFH @ 2.0"W.C. Torque Specification: Self-Clinching Studs, 5/16-8 UN thread, 11.5 ft-lbs minimum to 13.5 ft-lbs maximum. ,v+,.• Important: Leave these installation instructions C; and maintenance procedures with the station -;,� operator. .,. Notice:OPW products must be used in compliance with applicable federal,stale.and local laws and regulations. Product Manufacture:"OPVV' selection should be based on physical specifications and Model 61 SO-4- limitations and compatibility with the environment and material to (4"Represents Size) be handled. All illustrations and specifications in this literature are Manufacture Date: based on the latest production information available at the time of "MFG MM YY' publication. Prices,materials,and specification are subject to MM=Month YY=Year change at any time,and models may be discontinued at any time, in either case,without notice or obligation Product Identification CJ F=w VVI _ _ = r. ;.i DOVER)corrsa,rly P.O. Box 405003 " Cincinnati, Ohio 45240-5002 1-800-422-2525 Domestically, 513-870-3315 Internationally www.opw-fc.com Copyright, 2007- OPW Fueling Components Inc., Cincinnati, OH Printed in U.S.A. p/n H14790PA Rev. B- 5/07 59