Laserfiche WebLink
I <br /> CODE OF SAFE PRACTICES <br /> WELDING <br /> SAFE WORKPLACE CONDITIONS <br /> 1. Welding area ventilation hood must be working properly during welding operations. { <br /> 2. Grinding wheels shall be equipped with properly adjusted safety shields and tool rests. <br /> 3. Welding area must be clear of combustible materials. <br /> 4. Keep fire extinguisher within 6 feet. <br /> SAFE WORK PRACTICES <br /> 1. Machines must be turned off and locked out during maintenance,unless specifically approved and as <br /> directed by the maintenance Supervisor. <br /> 2. Welding must be done only in well-ventilated areas. <br /> 3. Parts being welded must be clean and dry. <br /> 4. Employees nnist not climb to heights where falls are possible without use of approved ladders and/or <br /> safety harness. <br /> 5. Follow all Company safety rules and policies. <br /> 6. Employees must report all unsafe conditions immediately to a Supervisor. <br /> 7. No horseplay is permitted. <br /> 8. Clean worksite conditions must be maintained at all times. <br /> 9. All Personal Protective Equipment(PPE)required by State or Federal Regulation must be worn. <br /> 10. All equipment guards required by State and Federal Regulations must be in place. <br /> 11. Report all accidents immediately to a Supervisor. <br /> 12. Use Lockout/Tagout/Blockout procedures when required by State or Federal Regulation. <br /> 13. Inspect equipment prior to each use. <br /> 14. Only operate equipment that you have been trained and authorized to use, <br /> 15. All electrical wiring shall be to code and maintained in safe condition. <br /> 16. Use proper lifting techniques. <br /> 17. Only qualified personnel can perform maintenance services. <br /> 18. Follow all Manufacturers safety guidelines. <br /> 19. Do not operate equipment tender the influence of altering prescription drugs,illegal drugs and/or <br /> alcohol. <br /> 20. Ensue that all Warning,Caution and Danger signs are in place. <br /> PERSONAL PROTECTIVE EQUIPMENT <br /> 1. Employees must wear chemical protective gloves when degreasing parts. <br /> 2. Employees must wear proper welding hoods and erect protective shields during welding. <br /> 3. Face shield and safety glasses while grinding. <br /> 4. Proper foot protection. <br /> 5. Gloves when welding or handling materials. <br /> 6. Respiratory protection required. <br /> 7. Proper welding procedure must be followed to prevent fires. <br /> 8. Ear protection must be worn. <br /> 9. Proper clothing,including welding leathers must be worn when required. <br />