SU0013791 - Laserfiche WebLink

Home Browse Search

3. All roof-mounted mechanical equipment, tanks, ventilating fans, or similar equipment shall be visually screened from view from adjacent properties and public rights-of-way at grade. Required screens shall be architecturally compatible with the building or structure on which they occur. i. SIGNS: Sign details shall be consistent with Chapter 9-1710 of the Development Title and be included on the Site Plan. All portions of any sign shall be set back a minimum of 5 feet from any future right- of-way line, including any corner cut-off(snipe). (Development Title Section 9-1710.2[g]) j. FIRE PREVENTION BUREAU: The following California Fire Code (CFC) requirements will be applicable to the proposed project. The following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division. 1. CFC 507 Fire Protection Water Supply-Fire flow and hydrants shall be provided for the proposed project by the use of: CFC Appendix B. For Static water, follow NFPA 22 and NFPA 1142, 2. If Fire Protection Systems are required, they shall be installed according to the CFC, Chapter 9 and the appropriate standards and guides adopted in Chapter 35 of the California Building Code and the California Electrical Code. 3. CFC, Section 503 Fire Apparatus Access Roads- Shall be provided as required by this section. 503.1.2-A secondary access may be required. 4. CFC, Section 906 Portable Fire Extinguishers—Provide portable fire extinguishers as required by this section. 5. CFC, Section 506 Key Box - A Knox® Box shall be installed according to the local fire department's instructions. Make application for the key box at the fire district having jurisdiction of this project. If there is an electronically controlled access gate at this site a Knox@ key switch will also be required. 6. CFC, Section 5001.3.3.1 Properties of Hazardous Materials — A complete list of hazardous materials used, stored, or planned for use/storage at this site shall be provided. 7. CFC Section 105 Permits: Operational Permit(s) may be required prior to occupancy. 8. CFC, Section 607 Commercial Kitchen Hoods may be required. k. BUILDING CODE: The following California Building Code(CBC)and San Joaquin County Ordinance requirements will be applicable to the proposed project. The following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division: 1. A building permit for each separate structure or building is required. Submit plans, Specifications and supporting calculations, prepared by a Registered Design Professional (architect or engineer) for each structure or building, showing compliance with The 2016 California Building, Existing Building, Mechanical, Plumbing, Electrical, Energy and Fire codes as may be applicable. Plans for the different buildings or structures may be combined into a single set of construction documents. 2. A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code. The plans shall show the existing grade on adjoining properties in sufficient detail to identify how grade changes will conform to the requirements of the code. PA-2000072—Conditions of Approval 3