Laserfiche WebLink
Network Setup Entering the Site ID Number <br /> TLS RF DEVICE NUMBER <br /> Each TLS RF in the site network must have a unique Device Number (0—3). You must select 0 if it is the only TLS <br /> RF in the site, or if it is the TLS RF in a site with multiple TLS RFs that is monitoring the first Device Set <br /> (transmitters 1 — 8). You would enter a 1 for the TLS RF monitoring the second Device Number (transmitters 9 — <br /> 16), etc.The site's receiver must also be connected to the TLS RF having Device Number V.The factory default <br /> setting is V. <br /> Enter this number by setting DIP switches 1 and 2 on S2 (see Figure 12 on page 21) in the 'off' position or'on' <br /> position as shown below. <br /> S2 DIP switch Settings <br /> Transmitter TLS RF <br /> Device Device 1 2 <br /> Number Number TLS RF <br /> 1-8 0 off off Master <br /> 9-16 1 off on AUX 1 <br /> 17-24 2 on off AUX 2 <br /> 25-32 3 on on AUX 3 <br /> 964-48.eps <br /> Entering the Site ID Number <br /> All of the site's Transmitters, Repeater and Receiver must have the same Site ID number (0 — 15) entered in S2 <br /> DIP switches 5 - 8 (see settings below).The TLS RF does not require a Site ID.The factory default Site ID number <br /> for all components is set to 0. <br /> NOTE: You must change the factory set Site ID when another site is nearby.Adjoining sites will experience data <br /> reception 'crosstalk' if both are left at the same number. <br /> S2 DIP switch Settings S2 DIP switch Settings <br /> Site ID Site ID <br /> Number 5 6 7 8 Number 5 6 7 8 <br /> 0 off off off off 8 on off off off <br /> 1 off off off on 9 on off off on <br /> 2 off off on off 10 on off on off <br /> 3 off off on on 11 on off on on <br /> 4 off on off off 12 on on off off <br /> 5 off on off on 13 on on off on <br /> 6 off on on off 14 on on on off <br /> 7 off on on on 15 on on on on <br /> 964-49.eps <br /> IME <br /> CARE Approved IOM 10-Veeder Root TLS RF Wireless Systems(W2)-Executive Order VR-202 <br />