COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

Important Safety Messages INCON equipment is designed to be installed in association with volatile hydrocarbon liquids such as gasoline and diesel fuel. Installing or working on this equipment means working in an environment in which these highly flammable liquids may be present.Working in such a hazardous environment presents a risk of severe injury or death if these instructions and standard industry practices are not followed. Read and follow all instructions thoroughly before installing or working on this, or any other related, equipment. As you read this guide, please be aware of the following symbols and their meanings: Warning This symbol identifies a warning.A warning sign will appear in the text of this document when a potentially hazardous situation may arise if the instructions that follow are not adhered to closely.A potentially hazardous situation may involve the possibility of severe bodily harm or even death. This is a caution symbol.A caution sign will appear in the text of this document when a potentially hazardous Caution � environmental situation may arise if the instructions that follow are not adhered to closely. A potentially hazardous environmental situation may involve the leakage of fuel from equipment that could severely harm the environment. This symbol identifies an electrical danger.An electrical danger sign will appear in the text of this document Danger when a potentially hazardous situation involving large amounts of electricity may arise if the instructions that follow are not adhered to closely.A potentially hazardous situation may involve the possibility of electrocution, severe bodily harm,or even death. WarningA Follow all applicable codes governing the installation and servicing of this product and the entire system.Always lock out and tag electrical circuit breakers while installing or servicing this equipment and any related equipment.A potentially lethal electrical shock hazard and the possibility of an explosion or fire from a spark can result if the electrical circuit breakers are accidentally turned on during installation or servicing. Please refer to the Installation and Owner's Manual for this equipment, and the appropriate documentation for any other related equipment,for complete installation and safety information. Warning Follow all federal,state and local laws governing the installation of this product and its associated systems.When no other regulations apply,follow NFPA codes 30,30A and 70 from the National Fire Protection Association. Failure to follow these codes could result in severe injury,death,serious property damage and/or environmental contamination. Warning®Always secure the work area from moving vehicles.The equipment in this manual is usually mounted underground,so reduced visibility puts service personnel working on this equipment in danger from moving vehicles entering the work area.To help eliminate these unsafe conditions, secure the area by using a service truck to block access to the work environment, or by using any other reasonable means available to ensure the safety of service personnel. Warning®When the console system is used to monitor tanks containing gasoline or other flammable substances,you may create an explosion hazard if you do not follow the requirements in this manual carefully. Warning All wiring must enter the console's enclosure through the designated knockouts.An explosion hazard may result if other openings are used. Warning®All wiring from probes or sensors to the console must be run in conduit separate from all other wiring. Failure to do so will create an explosion hazard. Warning®Substituting components could impair intrinsic safety.T5 series consoles are intrinsically safe for sensors installed in—Class I, Division 1, Group D—hazardous locations.Substitution of components could make the energy limiting circuitry in the system ineffective and could cause an explosion hazard. Repairs to a T5 series console or attached components should only be performed by a qualified,factory-trained technician. II-4 GARB Approved IBM 11-INEON Vapor Recovery Monitoring(VRM)-Executive Order VR-202