Laserfiche WebLink
Page 3 of 3 <br /> For consistency and employing prudent practices of installing an effective bentonite seal, the <br /> text in Section 3.4.2 should be modified to state: " After the seal has been hydrated, it will <br /> be allowed to cure for at least one hour prior further well sampling or construction <br /> activities." <br /> 2. In Section 3.4.6, on page 12, the third paragraph down, the workplan states: ".... water <br /> that is purged from each well will be temporarily contained and stored in 55-gallon <br /> drums, and then discharged to the ground surface ....". <br /> Since there is the potential for impacted groundwater to be encountered during the <br /> sampling program, this text should be revised to state: " ...water that is purged from each <br /> well will be temporarily contained and stored in 55-gallon drums, and pending <br /> laboratory results may be discharged to the ground surface <br /> hope that these minor changes to the workplan are sufficient to address the regulatory <br /> concerns and you are able to obtain the necessary well permits for this project. If I can be of <br /> any further assistance to you, please let me know. Thanks. <br /> Sarah Battelle,CHG <br /> Note that we have moved. Effective 5/9/2011. Phone and fax remain the same. <br /> Geo-Logic Associates <br /> 11415 West Bernardo Court,Suite 200 <br /> San Diego,CA 92127 <br /> 858-451-1136 <br /> 858-451-1087(fax) <br /> 858-688-8556 (cell) <br /> 1/30/2012 <br />