Laserfiche WebLink
( 4) other physical and chemical characteristics of the <br /> injection zone matrix including: <br /> - hydraulic conductivity , vertical and horizontal <br /> - porosity <br /> - drill core and sidewall core analysis <br /> - effective thickness of available sand (net sand) <br /> - individual thicknesses of sand beds or layers that <br /> are anticipated to take injection fluids <br /> ( 5 ) physical and chemical characteristics of the forma- <br /> tion fluids <br /> C) Confining layer information <br /> ( 1 ) formation fluid pressure <br /> ( 2) other physical and chemical characteristics of the <br /> confining zone matrix including: <br /> - hydraulic conductivity, vertical and horizontal <br /> - porosity <br /> - drill core and sidewall core analysis <br /> - thicknesses of significant shale layers or beds <br /> ( 3 ) physical and chemical characteristics of the forma- <br /> tion fluids <br /> D) Maintenance and calibration of monitoring equipment <br /> Prior to commencing injection the permittee shall submit , <br /> to the Director for review, procedures to be used for the <br /> proper operation and maintenance of the injection well . <br /> These procedures shall include a schedule for calibrating <br /> equipment, updating charts , regular maintenance of the <br /> well and system, and other related maintenance and <br /> monitoring checks. The Director must be notified of any <br /> changes in the above procedures. <br /> E) Continuous monitoring devices. . <br /> The permittee shall install continuous monitoring devices <br /> to monitor temperature ; injection pressure , rate, and <br /> volume ; and annular pressure and annular fluid volume in <br /> accordance with Part II , Section C , of this permit. <br /> The equipment shall be installed and operating prior to <br /> commencing injection of waste fluid into the injection <br /> well . <br /> 21 <br />