Laserfiche WebLink
PART III <br /> Information to be submitted to the Director for review before this permit becomes final. <br /> A) Logs and tests during drilling and construction <br /> (1) Porosity tools <br /> - density log <br /> - neutron log <br /> - sonic log <br /> (2)Lithology tools <br /> - gamma ray log <br /> - spontaneous-potential (SP) log <br /> (3) Resistivity tools <br /> - spherically focused log <br /> - dual induction log <br /> - deep induction <br /> - medium induction <br /> (4) Borehole tool <br /> - caliper log <br /> (5) Mechanical integrity tools <br /> - cement bond log <br /> - casing collar locator <br /> - temperature log <br /> - spinner survey <br /> - radioactive tracer survey <br /> B) Injection zone information <br /> (1) formation fluid pressure (reservoir pressure) <br /> (2) formation temperature <br /> (3) formation fracture pressure at the top of the formation (contact between <br /> injection and confining formations) determined by step-rate test or other ap- <br /> propriate test if approved by the Director <br /> (4) other physical and chemical characteristics of the injection zone matrix <br /> including: <br /> - hydraulic conductivity, vertical and horizontal <br /> - porosity <br /> 18 <br />