Laserfiche WebLink
OVERFILL <br />Although we can perform this test without particular fuel levels, or the sake of avoiding a return trip please remember <br />to have your fuel levels between 25-75%. If you have a total capacity of 33,000 gal of fuel or greater, your maximum <br />ullage is 25,000 gal in order to check the vapor tightness of your site after the Overfill Inspection is complete. If you are <br />expecting a fuel delivery on the day of the test, it needs to be completed more than 4 hours before testing can start. <br />Due to the nature of the testing, no fuel delivery can be made during the time of testing. If you do receive a fuel delivery <br />too close to the start of testing, we will be delayed starting and may have to reschedule. Because we are unable to <br />anticipate all repairs needed in order to finish the compliance testing, any repairs during the test that are completed will <br />be at the discretion of the technician and are subject to additional charges, including, but not limited to labor, parts, re- <br />testing, and travel. <br />If you have any questions, please reply to this email or call the office. <br />Thank you. <br />Margaret Smith <br />BZ Maintenance <br />Office: 916-371-2380 <br />Fax: 916-371-2540 <br />msmith@bzmaint.com <br />