|
1/2" 10 2' HIGH LETTERING
<br /> 10" 2" HIGH LETTERING 1/2' CODE REQUIREMENTS (CBC) ACCESSIBILITY NOTES ACCESSIBILITY NOTES (CONT.)
<br /> 1/4" RADIUS 1/4' RADIUS
<br /> TYP TYP
<br /> ACCESSIBLE ROUTES FLOOR OR GROUND SPACES (CONT.) DOORS AND DOORWAYS (CONT.)
<br /> I :.
<br /> EX ___ __ TO EXIT 11B-206.2.1 SITE ARRIVAL POINTS. AT LEAST ONE ACCESSIBLE ROUTE SHALL BE 11B-306.2.2 MAXIMUM DEPTH. TOE CLEARANCE SHALL EXTEND 25 INCHES (635 MM)
<br /> N / PROVIDED WITHIN THE SITE FROM ACCESSIBLE PARKING SPACES AND MAXIMUM UNDER AN ELEMENT. TYPE OF USE MINIMUM MANEUVERING CLEARANCE
<br /> - ___ __ • ACCESSIBLE PASSENGER LOADING ZONES; PUBLIC STREETS AND SIDEWALKS;
<br /> K. AND PUBLIC TRANSPORTATION STOPS TO THE ACCESSIBLE BUILDING OR FACILITY 11B-306.2.3 MINIMUM REQUIRED DEPTH. WHERE TOE CLEARANCE IS REQUIRED AT PARALLEL TO
<br /> ENTRANCE THEY SERVE. WHERE MORE THAN ONE ROUTE IS PROVIDED, ALL AN ELEMENT AS PART OF A CLEAR FLOOR SPACE, THE TOE CLEARANCE SHALL APPROACH DOOR OR GATE SIDE PERPENDICULAR TO DOORWAY(BEYOND
<br /> Q z Q z ROUTES MUST BE ACCESSIBLE. EXTEND 17 INCHES (432 MM) MINIMUM UNDER THE ELEMENT. DIRECTION DOORWAY LATCH SIDEEDU)NLESS
<br /> o = 3 2 1 �o = 3 2 1 11B-206.2.2 WITHIN A SITE. AT LEAST ONE ACCESSIBLE ROUTE SHALL CONNECT 11B-306.2.4 ADDITIONAL CLEARANCE. SPACE EXTENDING GREATER THAN 6 FROM FRONT PULL 60 INCHES{9524 MPSI) 18 INCHES (457 ivtivl)` O
<br /> C° v `° v ACCESSIBLE BUILDINGS, ACCESSIBLE FACILITIES, ACCESSIBLE ELEMENTS, AND INCHES (152 MM) BEYOND THE AVAILABLE KNEE CLEARANCE AT 9 INCHES (229 MM) FROM FRONT PUSH 48 INCHES (1219 MM) 0 INCHES (0 MM), ©2011 STARBUCKS COFFEE
<br /> ACCESSIBLE SPACES THAT ARE ON THE SAME SITE. ABOVE THE FINISH FLOOR OR GROUND SHALL NOT BE CONSIDERED TOE FROM HINGE SIDE PULL 60 INCHES (1524 MM) 36 INCHES(914 MM)
<br /> FINISH FLOOR FINISH FLOOR CLEARANCE. 44 INCHES(1195 o STARBUCKS COFFEE
<br /> 116-206.2.4 SPACES AND ELEMENTS.AT LEAST ONE ACCESSIBLE ROUTE SHALL FROM HINGE SIDE PUSH 22 INCHES (559 i�4tv1)
<br /> CONNECT ACCESSIBLE BUILDING OR FACILITY ENTRANCES WITH ALL ACCESSIBLE 11B-306.2.5 WIDTH. TOE CLEARANCE SHALL BE 30 INCHES (762 MM)WIDE MINIMUM. mW
<br /> SPACES AND ELEMENTS WITHIN THE BUILDING OR FACILITY, INCLUDING FROM LATCH SIDE PULL 60INCHFS(1 524 MM) 24 INCHES(610 MM) COMPANY
<br /> 'EXIT' SIGNAGE (AT ENTRY/EXIT DOORS) 'TO EXIT' SIGNAGE (AT WORKROOM DOOR) MEZZANINES, WHICH ARE OTHERWISE CONNECTED BY A CIRCULATION PATH 11B-306.3 KNEE CLEARANCE. FROM LATCH SIDE PUSH 44 INCHES(1998 241NCHES(610 MM) 2401 UTAH AVENUE SOUTH
<br /> NOTES:
<br /> UNLESS EXEMPTED BY SECTION IIB-206.2.3 EXCEPTIONS 1 THROUGH 7. SEATTLE, WASHINGTON 98134 118-306.3.1 GENERAL. SPACE UNDER AN ELEMENT BETWEEN 9 INCHES (229 MM) ADD 12 INCHES (305 MIA) IF CLOSER AND LATCH ARE PROVIDED.
<br /> ADD 4INCHES(102 MM) IF CLOSER,AND LATCH ARE PROVIDED. (206) 318-1575
<br /> 1[ TACTILE SIGN - 1/4" ETCHED SIGN WITH RAISED LETTERS AND GRADE 2 BRAILLE, PAINTED WITH MATTE PAINT IN CONTRASTING COLORS. 11B-206.2.5 RESTAURANTS, CAFETERIAS, BANQUET FACILITIES AND BARS. IN AND 27 INCHES (686 MM)ABOVE THE FINISH FLOOR OR GROUND SHALL BE BEYOND HINGE SIDE.
<br /> RESTAURANTS, CAFETERIAS, BANQUET FACILITIES, BARS, AND SIMILAR CONSIDERED KNEE CLEARANCE AND SHALL COMPLY WITH SECTION I IB-306.3. ADD 4INCHES(102 MM) IF CLOSER IS PROVIDED. THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> �I RAISED LETTERS TO BE SANS SERIF, UPPER CASE FONT, 5/8" MIN, 2" MAX HEIGHT, RAISED 1/32" MIN ABOVE BACKGROUND. FACILITIES, AN ACCESSIBLE ROUTE SHALL BE PROVIDED TO ALL FUNCTIONAL ADD 6INCHES(152 IAM)AT EXTERIOR SIDE OF EXTERIOR DOORS. CONFIDENTIAL AND SHALL REMAIN THE SOLE
<br /> AREAS, INCLUDING RAISED OR SUNKEN AREAS, AND OUTDOOR AREAS. 11B-306.3.2 MAXIMUM DEPTH. KNEE CLEARANCE SHALL EXTEND 25 INCHES (635 PROPERTY OF STARBUCKS CORPORATION, WHICH IS
<br /> ALTERNATE TEXT& BRAILLE TO READ: AS NEEDED, REFER TO CBC SECTIONS 1011.4 AND 11 B-703. FOR ADDITIONAL INFORMATION AND REQUIREMENTS. MM) MAXIMUM UNDER AN ELEMENT AT 9 INCHES (229 MM)ABOVE THE FINISH THE OWNER OF THE COPYRIGHT IN THIS WORK.
<br /> EMPLOYEE EMPLOYEE WOR ALAREAS. COY MON USE H SECTION CIRCULATION PATHS WITHIN FLOOR OR GROUND. 11B-404.2.4 MANEUVERING CLEARANCES. MINIMUM MANEUVERING CLEARANCES THEY SHALL PART), SHARE T BEWITH RDD REPRODUCEDPARTIE (IN WHOLE
<br /> USEIN AN
<br /> TACTILE SIGN AT DOORS AND GATES SHALL COMPLY WITH SECTION I IB-404.2.4. MANEUVERING
<br /> 20 11B-306.3.3 MINIMUM REQUIRED DEPTH. WHERE KNEE CLEARANCE IS REQUIRED CLEARANCES SHALL EXTEND THE FULL WIDTH OF THE DOORWAY AND THE MANNER ON OTHER PROJECTS OR EXTENSIONS TO
<br /> scale: 3" = 1'-0" 11B-402.2 COMPONENTS.ACCESSIBLE ROUTES SHALL CONSIST OF ONE OR MORE UNDER AN ELEMENT AS PART OF A CLEAR FLOOR SPACE, THE KNEE CLEARANCE THIS PROJECT WITHOUT THE PRIOR WRITTEN
<br /> OF THE FOLLOWING COMPONENTS: WALKING SURFACES WITH A RUNNING SLOPE SHALL BE 11 INCHES (279 MM) DEEP MINIMUM AT 9 INCHES (229 MM)ABOVE THE REQUIRED LATCH SIDE OR HINGE SIDE CLEARANCE. THIS
<br /> OF STARBUCKS CORPORATION. THESE
<br /> NOT STEEPER THAN 1:20, DOORWAYS, RAMPS, CURB RAMPS EXCLUDING THE FINISH FLOOR OR GROUND, AND 8 INCHES (203 MM) DEEP MINIMUM AT 27 INCHES 11B-404.2.4.1 SWINGING DOORS AND GATES. SWINGING DOORS AND GATES DRAWINGS AND SPECIFICATIONS ARE INTENDED TO
<br /> EQ EQ 9" FLARED SIDES, ELEVATORS, AND PLATFORM LIFTS. ALL COMPONENTS OF AN (686 MM)ABOVE THE FINISH FLOOR OR GROUND. SHALL HAVE MANEUVERING CLEARANCES COMPLYING WITH TABLE IIB-404.2.4.1. EXPRESS DESIGN INTENT FOR A PROTOTYPICAL
<br /> ACCESSIBLE ROUTE SHALL COMPLY WITH THE APPLICABLE REQUIREMENTS OF STARBUCKS STORE (WHICH IS SUBJECT TO CHANGE
<br /> DOOR MOUNTED SIGNAGE DIVISION 4. 11B-306.3.4 CLEARANCE REDUCTION. BETWEEN 9 INCHES (229 MM)AND 27 INCHES 11B-404.2.7 DOOR AND GATE HARDWARE. HANDLES, PULLS, LATCHES, LOCKS, AT ANYTIME)AND DO NOT REFLECT ACTUAL SITE
<br /> SHALL COMPLY WITH (686 MM)ABOVE THE FINISH FLOOR OR GROUND, THE KNEE CLEARANCE SHALL BE AND OTHER OPERABLE PARTS ON DOORS AND GATES SHALL COMPLY WITH CONDITIONS. NEITHER PARTY SHALL HAVE ANY
<br /> CALIFORNIA TITLE 24 A.D.A. FLOOR OR GROUND SPACES PERMITTED TO REDUCE AT A RATE OF 1 INCH (25 MM) IN DEPTH FOR EACH 6 SECT864 ION I MINIMUM AND OPERABLE
<br /> PARTS
<br /> ART SOF SUCH HARDWARE SHALL 18 MM MAXIMUM ABOVE THE FN 34 FINISHNCHES FLOOR OBLIGATION NOR LIABILITY TO THE OTHER (EXCEPT
<br /> REQUIREMENTS. GC SHALL INCHES (152 MM) IN HEIGHT. ( ) ( ) STATED ABOVE)UNTIL A WRITTEN AGREEMENT IS
<br /> 13 �� OR GROUND. WHERE SLIDING DOORS ARE IN THE FULLY OPEN POSITION, FULLY EXECUTED BY BOTH PARTIES.
<br /> G004 / VERIFY COMPLIANCE AND 11B-302 FLOOR OR GROUND SURFACES OPERATING HARDWARE SHALL BE EXPOSED AND USABLE FROM BOTH SIDES.
<br /> PROVIDE IF REQUIRED. 11B-306.3.5 WIDTH. KNEE CLEARANCE SHALL BE 30 INCHES (762 MM)WIDE
<br /> �G
<br /> J 11B-302.1 GENERAL. FLOOR AND GROUND SURFACES SHALL BE STABLE, FIRM, AND MINIMUM. 11B-404.2.10 DOOR AND GATE SURFACES. SWINGING DOOR AND GATE SURFACES ARCHITECT OF RECORD
<br /> O'C SLIP RESISTANT AND SHALL COMPLY WITH SECTION I IB-302. WITHIN 10 INCHES (254 MM) OF THE FINISH FLOOR OR GROUND MEASURED o -mU C U C
<br /> \A0 REACH RANGES VERTICALLY SHALL HAVE A SMOOTH SURFACE ON THE PUSH SIDE EXTENDING
<br /> 11B-303 CHANGES IN LEVEL THE FULL WIDTH OF THE DOOR OR GATE. PARTS CREATING HORIZONTAL OR t__ o
<br /> V / 11B-308 REACH RANGES VERTICAL JOINTS IN THESE SURFACES SHALL BE WITHIN 1/16 INCH (1.6 MM) OF = "
<br /> > �� UNISEX SIGNAGE SHOWN, 11B-303.1 GENERAL. WHERE CHANGES IN LEVEL ARE PERMITTED IN FLOOR OR THE SAME PLANE AS THE OTHER AND BE FREE OF SHARP OR ABRASIVE EDGES. Cz U) Will
<br /> DESIGNATED SIGNAGE GROUND SURFACES, THEY SHALL COMPLY WITH SECTION IIB-303. 11B-308.1.1 ELECTRICAL SWITCHES. CONTROLS AND SWITCHES INTENDED TO BE CAVITIES CREATED BY ADDED KICK PLATES SHALL BE CAPPED.
<br /> N FOR MEN'S &WOMEN'S USED BY THE OCCUPANT OF A ROOM OR AREA TO CONTROL LIGHTING AND
<br /> _O RESTROOMS USED WHEN 11B-303.2 VERTICAL. CHANGES IN LEVEL OF '/ INCH (6.4 MM) HIGH MAXIMUM SHALL RECEPTACLE OUTLETS,APPLIANCES OR COOLING, HEATING AND VENTILATING m c g a r c h i t e c u r e
<br /> U b APPLICABLE. BE PERMITTED TO BE VERTICAL AND WITHOUT EDGE TREATMENT. EQUIPMENT, SHALL COMPLY WITH SECTION 11 B-308 EXCEPT THE LOW REACH RAMPS 15635 Alton Parkway, Suite 100, Irvine, CA 92618
<br /> 06 �, � SHALL BE MEASURED TO THE BOTTOM OF THE OUTLET BOX AND THE HIGH REACH P:949.55te 100, r ne, CA 92618
<br /> >, 11B-303.3 BEVELED. CHANGES IN LEVEL BETWEEN '/, INCH (6.4 MM) HIGH MINIMUM SHALL BE MEASURED TO THE TOP OF THE OUTLET BOX. 11B-405.2 SLOPE. RAMP RUNS SHALL HAVE A RUNNING SLOPE NOT STEEPERW\El
<br /> \ AND '/z INCH (12.7 MM) HIGH MAXIMUM SHALL BE BEVELED WITH A SLOPE NOT THAN 1:12.
<br /> STEEPER THAN 1:2. 11B-308.1.2 ELECTRICAL RECEPTACLE OUTLETS. ELECTRICAL RECEPTACLE ARCHITECT STAMP
<br /> I OUTLETS ON BRANCH CIRCUITS OF 30 AMPERES OR LESS AND COMMUNICATION 11B-405.4 FLOOR OR GROUND SURFACES. FLOOR OR GROUND SURFACES OF
<br /> 0 11B-304 TURNING SPACE SYSTEM RECEPTACLES SHALL COMPLY WITH SECTION 11 B-308 EXCEPT THE LOW RAMP RUNS SHALL COMPLY WITH SECTION 11B-302. CHANGES IN LEVEL OTHER �C.�SGE WIN cyi
<br /> REACH SHALL BE MEASURED TO THE BOTTOM OF THE OUTLET BOX AND THE HIGH THAN THE RUNNING SLOPE AND CROSS SLOPE ARE NOT PERMITTED ON RAMPT�
<br /> X11B-304.3 SIZE. TURNING SPACE SHALL COMPLY WITH SECTION 11B-304.3.1 OR REACH SHALL BE MEASURED TO THE TOP OF THE OUTLET BOX. RUNS.
<br /> m 118-304.3.2. - 7839
<br /> co 11B-308.2 FORWARD REACH. 11B-405.5 CLEAR WIDTH. THE CLEAR WIDTH OF A RAMP RUN SHALL BE 48 INCHES 9/
<br /> I 11B-304.3.1 CIRCULAR SPACE. THE TURNING SPACE SHALL BE A SPACE OF 60 (1219 MM) MINIMUM. 1
<br /> 00 00 RESTROOM ADA DOOR SYMBOLS INCHES (1524 MM) DIAMETER MINIMUM. THE SPACE SHALL BE PERMITTED TO 11B-308.2.1 UNOBSTRUCTED. WHERE A FORWARD REACH IS UNOBSTRUCTED, THE 11B-405.6 RISE. THE RISE FOR ANY RAMP RUN SHALL BE 30 INCHES (762 MM)
<br /> Scale 1/2" - 1'-0" INCLUDE KNEE AND TOE CLEARANCE COMPLYING WITH SECTION IIB-306. HIGH FORWARD REACH SHALL BE 48 INCHES (1219 MM) MAXIMUM AND THE LOW MAXIMUM. ��F CALIFOQ-�
<br /> N - FORWARD REACH SHALL BE 15 INCHES (381 MM) MINIMUM ABOVE THE FINISH
<br /> 11B-304.3.2 T-SHAPED SPACE. THE TURNING SPACE SHALL BE A T-SHAPED SPACE FLOOR OR GROUND. 11B-405.7 LANDINGS. RAMPS SHALL HAVE LANDINGS AT THE TOP AND THE
<br /> WITHIN A 60 INCH (1524 MM) SQUARE MINIMUM WITH ARMS AND BASE 36 INCHES BOTTOM OF EACH RAMP RUN. LANDINGS SHALL COMPLY WITH SECTION IIB-405.7.
<br /> W NOTE: (914 MM)WIDE MINIMUM. EACH ARM OF THE T SHALL BE CLEAR OF OBSTRUCTIONS 11B-308.2.2 OBSTRUCTED HIGH REACH.WHERE A HIGH FORWARD REACH IS OVER
<br /> WALL MOUNTED SIGNAGE TO BE LOCATED ON 12 INCHES (305 MM) MINIMUM IN EACH DIRECTION AND THE BASE SHALL BE CLEAR AN OBSTRUCTION, THE CLEAR FLOOR SPACE SHALL EXTEND BENEATH THE
<br /> (D LATCH SIDE OF DOOR CLEAR OF DOOR-SWING. OF OBSTRUCTIONS 24 INCHES (610 MM) MINIMUM. THE SPACE SHALL BE PERMITTED ELEMENT FOR A DISTANCE NOT LESS THAN THE REQUIRED REACH DEPTH OVER CURB RAMPS
<br /> MOUNT AT 60" MAX TO BASELINE OF THE HIGHEST TO INCLUDE KNEE AND TOE CLEARANCE COMPLYING WITH SECTION 11B-306 ONLY THE OBSTRUCTION. THE HIGH FORWARD REACH SHALL BE 48 INCHES (1219 MM)
<br /> LINE OF RAISED CHARACTERS PER 11B-703. AT THE END OF EITHER THE BASE OR ONE ARM. MAXIMUM WHERE THE REACH DEPTH IS 20 INCHES (508 MM) MAXIMUM. WHERE 11B-406.2 PERPENDICULAR CURB RAMPS. PERPENDICULAR CURB RAMPS SHALL
<br /> 0 THE REACH DEPTH EXCEEDS 20 INCHES (508 MM), THE HIGH FORWARD REACH COMPLY WITH SECTIONS 11B-406.2 AND 11B-406.5.
<br /> U 11B-305.7 MANEUVERING CLEARANCE. WHERE A CLEAR FLOOR OR GROUND SHALL BE 44 INCHES (1118 MM) MAXIMUM AND THE REACH DEPTH SHALL BE 25
<br /> LETTERING RAISED 1/32" _ LL GENDER SPACE IS LOCATED IN AN ALCOVE OR OTHERWISE CONFINED ON ALL OR PART OF INCHES (635 MM) MAXIMUM. 11B-406.2.1 SLOPE. RAMP RUNS SHALL HAVE A RUNNING SLOPE NOT STEEPER
<br /> i THREE SIDES, ADDITIONAL MANEUVERING CLEARANCE SHALL BE PROVIDED IN THAN 1:12.
<br /> Q VO HEIGHT OF LETTERING 5/8" m--RESTROOM WITH SECTIONS IIB-305.7.1 AND IIB-305.7.2. 11B-308.3 SIDE REACH.
<br /> CV 11B-406.2.2 SIDES OF CURB RAMPS. WHERE PROVIDED, CURB RAMP FLARES
<br /> p MIN. TO 2" MAX. T 11B-305.7.1 FORWARD APPROACH. ALCOVES SHALL BE 36 INCHES (914 MM)WIDE 11B-308.3.1 UNOBSTRUCTED. WHERE A CLEAR FLOOR OR GROUND SPACE SHALL NOT BE STEEPER THAN 1:10.
<br /> _`O MINIMUM WHERE THE DEPTH EXCEEDS 24 INCHES (610 MM). ALLOWS A PARALLEL APPROACH TO AN ELEMENT AND THE SIDE REACH IS
<br /> m J �1 UNOBSTRUCTED, THE HIGH SIDE REACH SHALL BE 48 INCHES (1219 MM) MAXIMUM 11B-406.3 PARALLEL CURB RAMPS. PARALLEL CURB RAMPS SHALL COMPLY WITH
<br /> 3 ` `` ` CORRESPONDING GRADE II BRAILLE. PER 11B-305.7.2 PARALLEL APPROACH. ALCOVES SHALL BE 60 INCHES (1524 MM)WIDE AND THE LOW SIDE REACH SHALL BE 15 INCHES (381 MM) MINIMUM ABOVE THE ^^,,
<br /> � Vv SECTIONS 11B-406.3 AND 11B-406.5. W �
<br /> Q `OA`P CBC SECT. 11 B-703.3.2 BRAILLE SHALL BE X MINIMUM WHERE THE DEPTH EXCEEDS 15 INCHES (381 MM). FINISH FLOOR OR GROUND. > QD
<br /> ` FLUSH LEFT OR CENTERED AND PLACED A < 11B-406.3.1 SLOPE. THE RUNNING SLOPE OF THE CURB RAMP SEGMENTS SHALL O I`
<br /> UI �`� MIN. OF 3/8" INCH AND MAXIMUM OF 1/2 o z 11B-305 CLEAR FLOOR OR GROUND SPACE 11B-308.3.2 OBSTRUCTED HIGH REACH.WHERE A CLEAR FLOOR OR GROUND BE IN-LINE WITH THE DIRECTION OF SIDEWALK TRAVEL. RAMP RUNS SHALL HAVE W -0 co �
<br /> INCH BELOW RAISED CHARACTERS OR co SPACE ALLOWS A PARALLEL APPROACH TO AN ELEMENT AND THE HIGH SIDE A RUNNING SLOPE NOT STEEPER THAN 1:12. U W Ln
<br /> ` SYMBOLS 11B-305.2 FLOOR OR GROUND SURFACES. FLOOR OR GROUND SURFACES OF A REACH IS OVER AN OBSTRUCTION, THE HEIGHT OF THE OBSTRUCTION SHALL BE W 1[11� U)
<br /> 00
<br /> CLEAR FLOOR OR GROUND SPACE SHALL COMPLY WITH SECTION 11B-302. 34 INCHES (864 MM) MAXIMUM AND THE DEPTH OF THE OBSTRUCTION SHALL BE 24 11B-406.3.2 TURNING SPACE.A TURNING SPACE 48 INCHES (1219 MM) MINIMUM BY Q co Q `�
<br /> LI CHANGES IN LEVEL ARE NOT PERMITTED. INCHES (610 MM) MAXIMUM. THE HIGH SIDE REACH SHALL BE 48 INCHES (1219 MM) 48 INCHES (1219 MM) MINIMUM SHALL BE PROVIDED AT THE BOTTOM OF THE CURB Z �+ Q > O
<br /> N P MAXIMUM FOR A REACH DEPTH OF 10 INCHES (254 MM) MAXIMUM. WHERE THE RAMP. THE SLOPE OF THE TURNING SPACE IN ALL DIRECTIONS SHALL BE 1:48 \ 0 U
<br /> > FINISHED FLOOR I- /1 I- - >1
<br /> o W\E,
<br /> EXCEPTION: SLOPES NOT STEEPER THAN 1:48 SHALL BE PERMITTED. REACH DEPTH EXCEEDS 10 INCHES (254 MM), THE HIGH SIDE REACH SHALL BE 46 MAXIMUM. U U ! , }'
<br /> 0 INCHES (1168 MM) MAXIMUM FOR A REACH DEPTH OF 24 INCHES (610 MM) ILLI V W U C:
<br /> 06 11B-305.3 SIZE. THE CLEAR FLOOR OR GROUND SPACE SHALL BE 30 INCHES (762 MAXIMUM. 11B-406.5 COMMON REQUIREMENTS. CURB RAMPS AND BLENDED TRANSITIONS � � O (m � =3
<br /> >, MM) MINIMUM BY 48 INCHES (1219 MM) MINIMUM. SHALL COMPLY WITH SECTION 11B-406.5. (0 0
<br /> L
<br /> `, ACCESSIBLE ID WALL SYMBOLS 118-309 D- D- L0 U
<br /> 11B-305.4 KNEE AND TOE CLEARANCE. UNLESS OTHERWISE SPECIFIED, CLEAR
<br /> ~I 14 scale: 1 1/2" - 1'-0" FLOOR OR GROUND SPACE SHALL BE PERMITTED TO INCLUDE KNEE AND TOE 11B-309.1 GENERAL. OPERABLE PARTS SHALL COMPLY WITH SECTION 11B-309.
<br /> oo CLEARANCE COMPLYING WITH SECTION 11B-306. STORE #: 89$1
<br /> m 11B-309.2 CLEAR FLOOR SPACE.A CLEAR FLOOR OR GROUND SPACE COMPLYING
<br /> X11B-305.5 POSITION. UNLESS OTHERWISE SPECIFIED, CLEAR FLOOR OR GROUND WITH SECTION IIB-305 SHALL BE PROVIDED. O O O OO PROJECT #: 23870-070
<br /> m SPACE SHALL BE POSITIONED FOR EITHER FORWARD OR PARALLEL APPROACH TO CASEWORK CONCEPT:
<br /> U) AN ELEMENT. 11B-309.3 HEIGHT. OPERABLE PARTS SHALL BE PLACED WITHIN ONE OR MORE OF A ISSUE DATE: 02-23-2021
<br /> `tI THE REACH RANGES SPECIFIED IN SECTION IIB-308. 0 OO OO PROGRAM MANAGER: <DESIGN MANAGER>
<br /> 00 CBC SECT 1008.1.1 -DOOR SIZE 11B-305.6 APPROACH. ONE FULL UNOBSTRUCTED SIDE OF THE CLEAR FLOOR OR
<br /> O
<br /> *3' 0"DOOR WIDTH GROUND SPACE SHALL ADJOIN AN ACCESSIBLE ROUTE OR ADJOIN ANOTHER 11B-309.4 OPERATION. OPERABLE PARTS SHALL BE OPERABLE WITH ONE HAND STORE DESIGNER: JESSICA RAMOS
<br /> N68"HEIGHT CLEAR FLOOR OR GROUND SPACE. AND SHALL NOT REQUIRE TIGHT GRASPING, PINCHING, OR TWISTING OF THE LEED(j)AP: N/A
<br /> O
<br /> U) WRIST. THE FORCE REQUIRED TO ACTIVATE OPERABLE PARTS SHALL BE 5 OO OO OO
<br /> M CHECKED BY: <CHECKED BY>
<br /> v *32"CLEAR WIDTH 11B-305.7 MANEUVERING CLEARANCE. WHERE A CLEAR FLOOR OR GROUND POUNDS (22.2 N) MAXIMUM.
<br /> SPACE IS LOCATED IN AN ALCOVE OR OTHERWISE CONFINED ON ALL OR PART OF 04 MCG PROJECT#:
<br /> CBC SECT 11B 404.2.9 DOOR OPENING FORCE 0THREE SIDES, ADDITIONAL MANEUVERING CLEARANCE SHALL BE PROVIDED IN O O O OO MCG PROJ. MANAGER:
<br /> *TYPE OF HARDWARE:PUSH/PULL ACCORDANCE WITH SECTIONS 11B-305.7.1 AND IIB-305.7.2. DOORS AND DOORWAYS
<br /> (n MCG PROJ. SPECIALIST:
<br /> *MAX.EFFORT OFR EXT.DOORS=5 LBS 0.45"AT TOP
<br /> p *MAX.EFFORT FOR INT.DOORS=5 LBS. - 12" DIA 1' -0" 12" 11B-305.7.1 FORWARD APPROACH. ALCOVES SHALL BE 36 INCHES (914 MM)WIDE 11B-404.2 MANUAL DOORS, DOORWAYS,AND MANUAL GATES. MANUAL DOORS 2 35" TYPICAL PLAN
<br /> INTERIOR *REQUIRED FIRE DOORS,MAX.EFFORT=15 LBS. V MINIMUM WHERE THE DEPTH EXCEEDS 24 INCHES (610 MM). AND DOORWAYS AND MANUAL GATES INTENDED FOR USER PASSAGE SHALL .90"AT BASE Revision Schedule
<br /> UNISEX SIGNAGE IS FOR ALL COMPLY WITH SECTION 11B-404.2.
<br /> C) CBC SECT 1133B.2.6-SMOOTH SURFACE WOMEN
<br /> N MEN SINGLE ACCOMMODATION 11B-305.7.2 PARALLEL APPROACH. ALCOVES SHALL BE 60 INCHES (1524 MM)WIDE Rev Date By Description
<br /> O * 10"KICKPLATE OR SMOOTH FULL RESTROOMS MINIMUM WHERE THE DEPTH EXCEEDS 15 INCHESMM .381 11B-404.2.2 DOUBLE-LEAF DOORS AND GATES. AT LEAST ONE OF THE ACTIVE
<br /> ( ) GROUT BED.
<br /> N WIDTH OF DOOR LEAVES OF DOORWAYS WITH TWO LEAVES SHALL COMPLY WITH SECTIONS �
<br /> z4"4"FOR SOLD GLASS DOORS SANITARY FACILITIES 11B-404.2.3 AND 11B-404.2.4. = JOINT COLOR TO MATCH TILES.
<br /> W 11B-306 KNEE AND TOE CLEARANCE
<br /> _ SECTION 2-1711. (TITLE 24 STATE BUILDING CODE) N
<br /> 3-IDENTIFICATION SYMBOLS: 11B-306.1 GENERAL. WHERE SPACE BENEATH AN ELEMENT IS INCLUDED AS PART 11B-404.2.3 CLEAR WIDTH. DOOR OPENINGS SHALL PROVIDE A CLEAR WIDTH OF RECESS CONC. PER MFR.
<br /> CBC SECT 11B-404.2.10-THRESHOLDS ON DOORWAYS LEADING TO MEN'S SANITARY FACILITIES AN EQUILATERAL OF CLEAR FLOOR OR GROUND SPACE OR TURNING SPACE, THE SPACE SHALL 32 INCHES (813 MM) MINIMUM. CLEAR OPENINGS OF DOORWAYS WITH SWINGING RECOMMENDATIONS. TYPICAL SECTION A
<br /> *1/2"MAX.THRESHOLD TRIANGLE 1/4"THICK WITH EDGES 12" LONG AND A VERTEX POINTING COMPLY WITH SECTION IIB-306. ADDITIONAL SPACE SHALL NOT BE PROHIBITED DOORS SHALL BE MEASURED BETWEEN THE FACE OF THE DOOR AND THE NOTE:
<br /> UPWARD. STOP, WITH THE DOOR OPEN 90 DEGREES. OPENINGS MORE THAN 24 INCHES SHEET TITLE:
<br /> BENEATH AN ELEMENT BUT SHALL NOT BE CONSIDERED AS PART OF THE CLEAR 1. DETECTABLE WARNING SHALL BE OF CONTRASTING COLOR WITH
<br /> *114"FT.MAX.SLOPE (610 MM) DEEP SHALL PROVIDE A CLEAR OPENING OF 36 INCHES (914 MM) ACCESSIBILITY NOTES
<br /> ti FLOOR OR GROUND SPACE OR TURNING SPACE. MINIMUM. THERE SHALL BE NO PROJECTIONS INTO THE REQUIRED CLEAR ADJACENT
<br /> N SYMBOLS SHALL BE MOUNTED ON THE DOOR AT A HEIGHT OF +60"AFF TO THE SURFACE: LIGHT-ON-DARK OR DARK-ON-LIGHT. MATERIAL SHALL BE
<br /> nj EXTERIOR CENTERLINE OF SIGN, &THEIR COLOR AND CONTRAST SHALL BE DISTINCTLY 11B-306.2 TOE CLEARANCE. OPENING WIDTH LOWER THAN 34 INCHES (864 MM)ABOVE THE FINISH FLOOR INTEGRAL PART OF THE WALKING SURFACE.
<br /> DIFFERENT FROM THE COLOR& CONTRAST OF THE DOOR. OR GROUND. PROJECTIONS INTO THE CLEAR OPENING WIDTH BETWEEN 34 2. TRUNCATED DOMES TO BE: "INTERLOCK SAN DIEGO"TACTILE STONE,
<br /> INCHES (864 MM)AND 80 INCHES (2032 MM)ABOVE THE FINISH FLOOR OR CARLSBAD, CALIFORNIA 7 SCALE:AS SHOWN
<br /> 11B-306.2.1 GENERAL. SPACE UNDER AN ELEMENT BETWEEN THE FINISH FLOOR OR GROUND SHALL NOT EXCEED 4 INCHES (102 MM). ( 60)434-5566 OR APPROVED EQUAL.
<br /> DOOR THRESHOLD GROUND AND 9 INCHES (229 MM)ABOVE THE FINISH FLOOR OR GROUND SHALL BE
<br /> 17 ACCESSI BLE ID DOOR SYMBOLS CONSIDERED TOE CLEARANCE AND SHALL COMPLY WITH SECTION IIB-306.2. SHEET NUMBER:
<br /> N scale: 12"= 1'-°" 11 13 scale: 1 1/2" = 1'-0" TRUNCATED DOMES G 0 04
<br /> Scale: 6 - 1'-Q'
<br />
|