Laserfiche WebLink
IDENTIFICATION FOR <br />ELECTRICAL SYSTEMS <br />Section 16010 <br />15-1207 <br />Provide minimum letter height as follows: <br />a. For Panelboards, Distribution boards, Switchboards, Battery <br />Panels and Motor Control Center: 1/2 inch letters to identify <br />equipment designation. Use 1/4 inch letters to identify voltage, <br />phase and wires. <br />b. For Individual Circuit Breakers, Switches and Motor Starters in <br />Distribution panelboards, Distribution boards, Switchboards, <br />Switchgear and Motor Control Centers use 3/8 inch letters to <br />identify equipment designation. Use 1/8 inch letters to identify all <br />other. <br />C. For Individual mounted Circuit Breakers, Disconnect Switches, <br />Enclosed Switches and motor Starters use 3/8 inch letters to <br />identify equipment designation. Use 1/8 inch letters to identify all <br />others. <br />d. For Transformers use 1/2 inch letters to identify equipment <br />designation. Use 1/4 inch letters to identify primary and <br />secondary voltages, primary disconnect location, and other <br />specified data. <br />e. For equipment cabinets, terminal cabinets, control panels and <br />other cabinet enclosed apparatus use 3/8 inch letters to identify <br />equipment designation. <br />B. Minimum nameplate thickness: 1/16 inch .for signs up to 20 square inches, or 8 <br />inches in length; 1/8 inch thick for larger sizes. Furnish with pre -punched holes <br />for mechanical fasteners. <br />2.3 LABELS <br />A. Labels: Thermal transfer laminated adhesive tape, with 1/8 -inch black letters on <br />clear tape cartridge. <br />2.4 WIRE MARKERS <br />A. Description:: Self -adhering, pre-printed, machine printable or write -on, self - <br />laminating vinyl wrap around strips. Inscribe blank markers using the printer or <br />pen recommended by the manufacturer for this purpose. <br />B. Legend: <br />1. Power and Lighting Circuits: Branch circuit or feeder number as indicated <br />on Drawings. <br />2. Control Circuits: Control wire number as indicated on shop drawings. <br />2.5 CONDUCTOR PHASE MARKERS <br />A. Colored vinyl plastic electrical tape, 3/4 inch wide, for identification of phase <br />conductors. <br />2.6 CONDUIT AND RACEWAY MARKERS <br />2 <br />