Laserfiche WebLink
CUTTING AND PATCHING <br />Section 01045 <br />15-1207 <br />F. Refinish entire surfaces as necessary to provide even finish to match adjacent finishes: <br />1. For continuous surfaces, refinish to nearest intersection. <br />2. For an assembly, refinish entire unit. <br />3.04 CLEANING <br />A. Upon completion of installation, remove manufacturer's temporary labels, marks of <br />identification. Thoroughly wash surfaces and remove foreign material. Leave entire work in <br />neat, orderly, clean and acceptable condition. Replace damaged parts and surfaces which <br />are not free from imperfections. <br />3.05 PROTECTION <br />A. Protect work and materials of this Section prior to and during installation, and protect the <br />installed work and materials of other trades. <br />B. In the event of damage, make all repairs and replacements necessary to the approval of the <br />Architect at no additional cost to the Owner. <br />C. Exposed finishes shall be free from scratches, dents, permanent discolorations and other <br />defects in workmanship or material. <br />END OF SECTION <br />1:11207 lincoln es - cafeteria replacement14.06 projman101045 cutting & patching.doc <br />4 <br />