WORK PLANS - Laserfiche WebLink

Home Browse Search

APPARATUS EQUIPMENT - PRIMARY Section 02462 15-1207 15_0360_Lincoln_001_Upper Grades Structure KIDS' CHOICE POSTS: DECK LEVEL POSTS: The deck level posts are designed to use between split decks to create a larger turnaround deck. Steel posts shall be constructed of 5" tube, 11 ga. Cap assembly shall comprise a cap, shim and bracket. Cap with solid welded bracket shall be constructed of 11 ga. black sheet. Cap shall measure 4-7/8" in diameter. Shim shall be constructed of 11 ga. A-60 sheet and shall measure 4-3/8" in length. Bracket shall be constructed of 11 ga. A-60 sheet and shall measure 2-11/16" in greatest width and 7-1/2" in length. Components shall be field assembled to posts by means of Versalok. JAX RIZERS TO DECK: shall feature 1, 2, 3 or 4 "jacks" shaped, rotomolded pieces attached to Deck Posts, creating challenging climbers. JAX body shall be a rotomolded piece measuring 63" in greatest width and 18" in greatest height. One solid piece, JAX shall feature a triangular body that flows into 3 spheres, each 18" in diameter. Each sphere shall have a notched center hole 6 3/4" in diameter through the entirety of the sphere. Support assembly shall comprise support straps, support strap braces, a cover plate and a cam lock spacer. Support straps shall be constructed of 1/4" x 1" flat and measure 14-3/16" in height. Support strap braces shall be constructed of 1/4" x 1" flat and shall measure 3" in height. Entire assembly shall be solid welded. DNA CLIMBER TO DECK: shall be a balance and climbing challenge featuring twisted rungs and ropes. Arch shall be constructed of 5" tube, 11 ga. with a 78.5 degree arch radius and 115-1/2" arch length. At 15" intervals and approximately 21 degree apart, a rung shall be solid welded to arch. Rungs shall consist of a 29" long, 1", 10 ga. tube welded to a 4" diameter hollow steel ball. A 7 ga. sheet, A-60 galvanized bracket shall be welded to climber for deck attachment. Entire weldment shall measure 121- 1/16" in length and 95-3/8" in height. Enclosure shall comprise top rails, L rails and arch of 1" pipe, Gator Grip and spokes of 3/4" x 1" oval tube. Enclosure shall have a 7 ga. galvanized sheet constructed hand support bracket solid welded to inside uprights. Enclosure shall measure 62-3/8" in length and 41-1/2" in width. Rope shall be constructed of 16 mm sheathed wire. All fastening hardware shall be Fastener Style A. DNA Climber shall be finished in Mira - Cote. PHYZICS FLUX CAPACITOR: shall feature 3 "jacks" shaped, rotomolded pieces attached to a center post, and 4 Orbs on 3 curved posts encircling the center post, creating a challenging climber. JAX body shall be a rotomolded piece measuring 63" in greatest width and 18" in greatest height. One solid piece, JAX shall feature a triangular body that flows into 3 spheres, each 18" in diameter. Support assembly shall consist of a support plate, support straps, support strap braces, and cam lock spacers. Triangular shaped support plate shall be constructed of 7 ga. sheet and shall measure 20-13/16". Straps shall measure 8-3/4" in length and shall be constructed of 1/4" x 1" flat. Support strap braces shall be constructed of 1/4" x 1" flat and shall measure 3" in height. Spacer shall be 1/2" in diameter and 5/16" tall, constructed of AISI 1020 CR steel, zinc plated. Entire assembly shall be solid welded. Center post shall be constructed of 5" OD x 11 ga. galvanized and shall measure 136" in height. A 5" round cap shall be pressed into top end. 5