WORK PLANS - Laserfiche WebLink

Home Browse Search

LANDSCAPING Section 02900 Project 15-1207 13. Stake shrubs with one -inch by one -inch by eighteen -inch (1"x1"x18") stakes in such manner that the stakes are not visible, and tie to upright position if they lean and/or are not growing in a vertical position. 14. Furnish quantities necessary to complete the work as shown on the Drawings and, if necessary, make up for any discrepancies in the quantities given in the Plant List at no additional cost to Owner. G. Comply with the requirements of Section 01700 — CONTRACT CLOSEOUT. 1.05 INSPECTION REQUIREMENTS A. Landscape Architect reserves the right to examine and reject plant material both at place of growth and at site, before and after planting, for compliance with requirements of name, variety, size, and quality. B. Request and hold a pre -construction meeting prior to beginning the work of this Section. Parties required to be in attendance are the Landscape Contractor, Proiect Inspector, Owner's Representative, and Landscape Architect. C. Obtain verification from Proiect Inspector for the following at the appropriate times during construction and prior to further progression of work in this Section: Rough grading is to tolerances specified in Section 02200 — EARTHWORK. 2. The placement of landscape backfill material is as specified in this Section. 3. Prior to the commencement of the work specified in this Section, the coverage and operation of the sprinkler irrigation system are as specified in Section 02810 - SPRINKLER IRRIGATION. 4. The soil amendment does not include any metal fragments. (Obtain a letter from the manufacturer stating that the material submitted for use on this project has no metal or foreign objects. Submit this letter as part of the Data Sheet submittal package [see "Submittals and Substitutions" in this Section]) 5. Required Test: For each load of soil amendment delivered to the site, spread at least two cubic yards (2 cy) of material onto a paved surface approximately two inches (2") deep. Pass a magnetic rake over the material in two directions. If any metal is found, test the entire load in the same manner. Perform all testing in the presence of the Project Inspector. 6. Soil amendments, fertilizer, bark have been delivered to the site by the supplier, the invoices from the supplier indicate the project name and quantities delivered, and the Proiect Inspector has received copies of all such documents. 7. Prior to planting, amendments and conditioners have been incorporated as per pre -planting recommendations, and planting areas have been made ready to receive planting. 4