WORK PLANS - Laserfiche WebLink

Home Browse Search

APPARATUS FILL Section 02925 15-1207 PART 1 -GENERAL 1.01 INCLUSION OF OTHER CONTRACT DOCUMENTS A. The General Conditions, Supplementary Conditions and Division 1 are fully applicable to this Section, as if repeated herein. 1.02 RELATED WORK SPECIFIED ELSEWHERE A. Section 02200, Earthwork B. Section 02400, Site Drainage C. Section 02462, Apparatus Equipment 1.03 QUALITY ASSURANCE A. Use only new materials and products, unless existing materials or products are specifically shown otherwise on the Drawings to be salvaged and re -used. B. Use materials and products of one manufacturer whenever possible. C. All materials, components, assemblies, workmanship and installation are to be observed by the Owner's Inspector of Record. Work not so inspected is subject to uncovering and replacement. D. Certification: 1. Surfacing shall be IPEMA-Certified Engineered Wood Fiber. Standard wood chips or bark mulch will not be acceptable. 2. Supplier must certify that the surface meets the intent of the Americans with Disabilities Act (ADA). E. Tests: 1. Supplier must provide test results for engineered wood fiber material and impact attenuation mat for impact attenuation in accordance with ASTM F 1292 Standard Specification for Impact Attenuation for Surface Systems Under and Around Playground Equipment. Results must be provided for new material and for 12 -year old engineered wood fiber material. 2. Testing of engineered wood fiber material shall be in accordance with ASTM F 1292 and must show G -max values of less than 120G for the 12" system at 12' drop heights, and HIC values of less than 1,000 for both new and 12 -year-old material. 3. Testing of impact attenuation mat must be in accordance with ASTM F 1292 and must show G -max values of less than 200G, and HIC values of less than 1,000 for a 3' drop height. 4. Supplier must provide test results for the engineered wood fiber in accordance with ASTM F 2075 Specification for Engineered Wood Fiber for Use as Playground Safety Surface Under and Around Playground Equipment. 5. Supplier must provide test results in accordance with ASTM F 1951 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment.