Laserfiche WebLink
SHEET METAL <br />Section 07600 <br />15-1207 <br />PART 1 -GENERAL <br />1.01 INCLUSION OF OTHER CONTRACT DOCUMENTS <br />A. The General Conditions, Supplementary Conditions and Division 1 are fully applicable to this <br />Section, as if repeated herein. <br />1.02 RELATED WORK SPECIFIED ELSEWHERE <br />A. Section 01350, Environmental Requirements. <br />B. Section 05400, Cold Formed Metal Framing. <br />C. Section 06100, Rough Carpentry. <br />D. Section 07410, Preformed Metal Soffit. <br />E. Section 07550, Built-up Roofing. <br />F. Section 07900, Joint Sealants. <br />G. Section 08100, Metal Doors and Frames. <br />H. Section 09900, Painting. <br />Divisions 15 and 16, Mechanical and Electrical Sections. <br />1.03 QUALITY ASSURANCE <br />A. Use only new materials and products, unless existing materials or products are specifically <br />shown otherwise on the Drawings to be salvaged and re -used. <br />B. Use materials and products of one manufacturer whenever possible. <br />C. All materials, components, assemblies, workmanship and installation are to be observed by <br />the Owner's Inspector of Record. Work not so inspected is subject to uncovering and <br />replacement. <br />D. Qualifications of Manufacturer: Products used in the work of this Section shall be produced <br />by manufacturer's regularly engaged in manufacture of similar items and with a history of <br />successful production acceptable to the Architect. <br />1.04 SUBMITTALS <br />A. Refer to Section 01300. <br />B. Shop Drawings: Submit showing all parts, connections and anchorages, adjacent materials, <br />fully dimensioned and noted. Submit shop drawings of fabricated items showing profiles and <br />relationship to adjacent materials. <br />C. Submit sample for each color of the manufacturer's standard colors for Prefinished Metal <br />Parapet Cap and Prefinished Edge Metal Fascia: <br />