Laserfiche WebLink
SKYLIGHTS & LIGHT <br />CONTROL LOUVERS <br />Section 08621 <br />15-1207 <br />PART 1 - GENERAL <br />1.01 INCLUSION OF OTHER CONTRACT DOCUMENTS <br />A. The General Conditions, Supplementary Conditions and Division 1 are fully applicable to this <br />Section, as if repeated herein. <br />1.02 RELATED WORK SPECIFIED ELSEWHERE <br />A. Section 05100, Structural Steel. <br />B. Section 05300, Metal Decking. <br />C. Section 05400, Cold Formed Metal Framing. <br />D. Section 07500, Single Ply Roofing. <br />E. Section 07600, Sheet Metal. <br />F. Section 07900, Joint Sealants. <br />G. Section 08800, Glazing. <br />1.03 QUALITY ASSURANCE <br />A. Manufacturer Qualifications: All primary products specified in this section will be supplied by a <br />single manufacturer with a minimum of ten (10) years experience. <br />B. Installer Qualifications: All products listed in this section are to be installed by a single installer <br />with a minimum of five (5) years demonstrated experience in installing products of the same <br />type and scope as specified. <br />C. Use only new materials and products, unless existing materials or products are specifically <br />shown otherwise on the Drawings to be salvaged and re -used. <br />D. Use materials and products of one manufacturer whenever possible. <br />E. All materials, components, assemblies, workmanship and installation are to be observed by <br />the Owner's Inspector of Record. Work not so inspected is subject to uncovering and <br />replacement. <br />1.04 SUBMITTALS <br />A. Refer to Section 01300. <br />B. Manufacturer's Data: Submit list and complete descriptive data of all products proposed for <br />use. Include manufacturer's specifications, published warranty or guarantee, installation <br />instructions, and maintenance instructions. Provide all information necessary for DSA <br />deferred approval process. <br />C. Shop Drawings: Submit showing all parts, connections and anchorages, adjacent materials, <br />