Laserfiche WebLink
CERAMIC TILE <br />Section 09300 <br />15-1207 <br />PART 1 - GENERAL <br />1.01 INCLUSION OF OTHER CONTRACT DOCUMENTS <br />A. The General Conditions, Supplementary Conditions and Division 1 are fully applicable to this <br />Section, as if repeated herein. <br />1.02 RELATED WORK SPECIFIED ELSEWHERE <br />A. Section 01350, Environmental Requirements. <br />B. Section 03300, Cast -In -Place Concrete. <br />C. Section 08305, Access Doors. <br />D. Section 09250, Gypsum Wallboard. <br />E. Section 10800, Toilet Accessories. <br />F. Section Division 15, Mechanical Work, for floor drains and plumbing fixtures. <br />1.03 STANDARDS & REFERENCES <br />ANSI A108.1 Installation of Ceramic Tile Portland Cement Mortar <br />ANSI A108.4 Installation of Ceramic Tile with Organic Adhesives or Water -Cleanable Epoxy <br />Adhesive <br />ANSI A108.5 Installation of Ceramic Tile with Dry -Set Portland Cement Mortar or Latex Portland <br />Cement Mortar <br />ANSI A108.6 Installation of Ceramic Tile with Chemical Resistant, Water -Cleanable, Tile Setting <br />and Grouting Epoxy <br />ANSI A108.10 Installation of Grout in Tile Work <br />ANSI A108.11 Installation of Cementitious Backer Units <br />ANSI A108.13 Installation of Waterproof Membranes for Thin -Set Tile and Stone <br />ANSI A118.1 Dry -Set Portland Cement Mortar <br />ANSI A118.3 Chemical Resistant, Water -Cleanable Tile Setting and Grouting Epoxy and Water - <br />Cleanable Tile Setting Epoxy Adhesive <br />ANSI A118.4 Latex Portland Cement Mortar <br />ANSI A118.6 Ceramic Tile Grouts <br />ANSI A118.7 Polymer Modified Cement Grout <br />ANSI A118.9 Cementitious Backer Units <br />ANSI A118.10 Waterproof membranes for Thin -Set Tile and Stone <br />ANSI A118.11 EGP (Exterior Glue Plywood) latex -Portland cement mortar <br />ANSI A136.1 Organic Adhesives, Type I Adhesive and Type 11 Adhesive <br />TCNA Handbook for Ceramic Tile Installation <br />U.S. Product Standard PS 1-83 for Construction and Industrial Plywood <br />Title 24, Part 2, CCR, California Building Code. <br />1.04 QUALITY ASSURANCE <br />A. Use only new materials and products, unless existing materials or products are specifically <br />shown otherwise on the Drawings to be salvaged and re -used. <br />