Laserfiche WebLink
FIBERGLASS REINFORCED PANELS <br />Section 09772 <br />15-1207 <br />PART 1 - GENERAL <br />1.01 INCLUSION OF OTHER CONTRACT DOCUMENTS <br />A. The General Conditions, Supplementary Conditions and Division 1 are fully applicable to this <br />Section, as if repeated herein. <br />1.02 RELATED WORK SPECIFIED ELSEWHERE <br />A. Section 01350, Environmental Requirements. <br />B. Section 06100, Rough Carpentry. <br />C. Section 09250, Gypsum Wall Board. <br />D. Section 09650, Resilient Flooring & Base. <br />1.03 QUALITY ASSURANCE <br />A. Use only new materials and products, unless existing materials or products are specifically <br />shown otherwise on the Drawings to be salvaged and re -used. <br />B. Use materials and products of one manufacturer whenever possible. <br />C. All materials, components, assemblies, workmanship and installation are to be observed by <br />the Owner's Inspector of Record. Work not so inspected is subject to uncovering and <br />replacement. <br />D. Work shall be done under direction of a capable foreman experienced in installation of finish <br />carpentry work. <br />1.04 SUBMITTALS <br />A. Refer to Section 01300. <br />B. Manufacturer's Data: Submit list and complete descriptive data of all products proposed for <br />use. Include manufacturer's specifications, published warranty or guarantee, installation <br />instructions, and maintenance instructions. <br />C. Samples: The following samples are required. Submit per Section 01300. <br />1. Submit sample for each type of panel and trim to Architect for review. <br />2. Manufacturer's full range of colors for Architect's selection. <br />D. Shop Drawings: Submit showing all parts, connections and anchorages, adjacent materials, <br />fully dimensioned and noted. <br />E. Submit executed Guarantee of Contractor/Subcontractor per Article 1.05. <br />1.05 GUARANTEE <br />A. Refer to General Conditions and Section 01300. <br />1 <br />