Laserfiche WebLink
FIBERGLASS REINFORCED PANELS <br />Section 09772 <br />15-1207 <br />B. Submit fully executed Guarantee with submittal package required by Article 1.04. <br />1.06 REFERENCES AND STANDARDS <br />A. California Building Code (CBC), current edition, as adopted by the California Division of the <br />State Architect (DSA). <br />B. California Green Building Standards Code, current edition, as adopted by the California <br />Division of the State Architect (DSA). <br />1.07 DELIVERY, STORAGE AND HANDLING <br />A. Deliver undamaged products to job in manufacturer's sealed containers and/or original <br />bundles with tags and labels intact. <br />B. Store materials in protected, dry conditions off of ground and in areas so as to not interfere <br />with the progress of the work. <br />C. Transport, store and handle in strict accord with the manufacturer's written recommendations. <br />D. Make delivery to job when notified by Contractor verifying that the job is ready to receive the <br />work of this Section and that arrangements have been made to properly store, handle and <br />protect such materials and work. <br />1.08 PROJECT CONDITIONS <br />A. Products shall be available at project when required for installation so as not to delay job <br />progress. Installer for these products shall cooperate with installers performing work under <br />other Sections involved to effect proper installation. <br />1.09 FIELD MEASUREMENTS <br />A. Make and be responsible for all field dimensions necessary for proper fitting and completion <br />of work. Report discrepancies to Architect before proceeding. <br />PART 2 - PRODUCTS <br />2.01 MATERIALS <br />A. Panels: Nudo Products, Inc., Fiber -Lite® Liner Panels, fiberglass reinforced panel (FRP). <br />1. LP -F9 (textured) <br />2. Color: As selected by the Architect from a minimum of 8 standard colors. <br />3. Fire rating to be Class III with a flame spread rating of less than 200 and a smoke <br />developed rating not to exceed 450. <br />B. Moldings: Provide manufacturer's moulding for all panel edges and other locations to suit <br />conditions. Trim to be vinyl molding to match panel color [OR] clear anodized aluminum <br />molding <br />2 <br />