Laserfiche WebLink
WALL COVERINGS <br />Section 09950 <br />15-1207 <br />bundles with tags and labels intact. <br />B. Store materials in protected, dry conditions off of ground and in areas so as to not interfere <br />with the progress of the work. <br />C. Transport, store and handle in strict accord with the manufacturer's written recommendations. <br />D. Make delivery to job when notified by Contractor verifying that the job is ready to receive the <br />work of this Section and that arrangements have been made to properly store, handle and <br />protect such materials and work. <br />1.08 PROJECT CONDITIONS <br />A. Temperatures: <br />1. Provide continuous ventilation and heating facilities to maintain substrate and ambient <br />temperatures above 65 degrees F, unless required otherwise by manufacturer's <br />instructions. <br />2. Do not apply adhesive when substrate surface temperature or ambient temperature is <br />below 65 degrees F, or relative humidity is above 40%. <br />3. Maintain these conditions 72 hours before, during and after installation of vinyl wall <br />covering. <br />B. Lighting: Provide not less than 80 foot-candles per square foot minimum, on the surfaces to <br />receive wall coverings. <br />C. Do not apply under conditions which jeopardize quality of appearance of finished product. <br />1.09 FIELD MEASUREMENTS <br />A. Make and be responsible for all field dimensions necessary for proper fitting and completion <br />of work. Report discrepancies to Architect before proceeding. <br />PART 2 - PRODUCTS <br />2.01 GENERAL <br />A. Materials shall be ordered not less than 45 days prior to the scheduled installation date. <br />2.02 MATERIALS <br />A. Flexible Vinyl Wall Coverings: "Spellbound", as manufactured by Koroseal or approved equal. <br />Minimum 21 oz. per linear yard, 54 wide, 27 Mils, vinyl fabric meeting the requirements of <br />WA -W-101, Type II; Class A Rating (0-25) in accordance with NFPA 255 (UL723); Flame <br />Spread, Smoke Developed, and Flashover in accordance with NFPA 286; UL Rated and <br />Labeled. Mildew inhibitorized. Colors selected by Architect from Manufacturer's standard <br />range. Any substitution to be considered must be similar in texture and pattern, provide <br />similar color options, and meet physical characteristics of specified material. <br />B. Microvented Flexible Vinyl Wall Covering: "Spellbound", as manufactured by Koroseal or <br />approved equal. Microvented at a frequency rate of 150 holes per square inch; minimum 21 <br />3 <br />