Laserfiche WebLink
LOUVERS AND VENTS <br />Section 10200 <br />15-1207 <br />1.05 GUARANTEE <br />A. Refer to General Conditions and Section 01300. <br />B. Submit fully executed Guarantee with submittal package required by Article 1.04. <br />1.06 DELIVERY, STORAGE AND HANDLING <br />A. Deliver undamaged products to job in manufacturer's sealed containers and/or original <br />bundles with tags and labels intact. <br />B. Store materials in protected, dry conditions off of ground and in areas so as to not interfere <br />with the progress of the work. <br />C. Transport, store and handle in strict accord with the manufacturer's written recommendations. <br />D. Make delivery to job when notified by Contractor verifying that the job is ready to receive the <br />work of this Section and that arrangements have been made to properly store, handle and <br />protect such materials and work. <br />1.07 FIELD MEASUREMENTS <br />A. Make and be responsible for all field dimensions necessary for proper fitting and completion <br />of work. Report discrepancies to Architect before proceeding. <br />PART 2 - PRODUCTS <br />2.01 LOUVER TYPE <br />A. Factory manufactured, all welded, stationary extruded aluminum, architectural blade louvers, <br />Type K666 as manufactured by The Airolite Company of Marietta, Ohio or approved equal. <br />2.02 MATERIALS <br />A. Material: Extruded aluminum (Alloy 6063-T5). <br />B. Stationary Blades and Frame: 0.081 -inch thick. <br />C. Louver Depth: 4 -inches. <br />D. Blade Angle: 30 degrees. <br />E. Finish: Factory prime, grey enamel for field finish per 09900, Painting. <br />F. Accessories: Provide interior, removable bird/insect screen, required supports and <br />installation hardware. <br />2 <br />