Laserfiche WebLink
LOUVERS AND VENTS <br />Section 10200 <br />15-1207 <br />PART 3 - EXECUTION <br />3.01 INSPECTION <br />A. Prior to installation of the work of this Section, carefully inspect and verify that the installed <br />work of other trades is complete to the point where this installation may properly commence. <br />B. Verify that specified items may be installed in accordance with the approved design. <br />C. In the event of discrepancy, immediately notify Architect. Do not proceed in discrepant areas <br />until discrepancies have been fully resolved. <br />3.02 INSTALLATION <br />A. Install items where indicated on the Drawings and as directed. Use care not to damage <br />adjacent work when installing products. Adjust moving parts to operate smoothly, quietly, <br />without binding. Shim as required, secure to masonry and concrete framing as indicated. <br />Cooperate with exterior finish installer for installation of related work. <br />3.03 ADJUSTING AND CLEANING <br />A. Thoroughly wash surfaces, remove foreign material. Leave work in neat, clean, acceptable <br />condition, ready for painting as approved. Replace damaged parts and surfaces, which have <br />imperfections. <br />3.04 PROTECTION <br />A. Protect work and materials of this Section prior to and during installation, and protect the <br />installed work and materials of other trades. <br />B. In the event of damage, immediately make all repairs and replacements necessary to the <br />approval of the Architect and at no cost to the Owner. <br />END OF SECTION <br />1.11207 Nncoln as - cafeteria replacementl4. 06 projmanW 0200 Louvers & vents. doc <br />Last Updated: January 10, 2007 <br />3 <br />