WORK PLANS - Laserfiche WebLink

Home Browse Search

SIGNS Section 10445 15-1207 thick material. Painted signs will not be accepted. a. Provide lettering and graphics precisely formed, uniformly opaque to comply with relevant ADA regulations and requirements indicated for size, style, spacing, content, position and colors. Tactile signs shall comply with 2013 CBC, Section 11 B-703. b. Symbols where specified shall be International Style. C. Braille shall be California Contracted (Grade 2) Braille. Dots shall be 0.10 -inch on centers in each cell and 0.30 -inch on center between corresponding dots in adjacent cells. Dots shall be raised a minimum of 0.025 -inch and a maximum of 0.035 -inch above the background. 4. Colors: High contrast, non -glare, integral colors for graphics. All integral materials shall be U.V. stabilized. Letters and symbols shall be in high contrast with background color and must conform to the CBC and the 2010 ADA Standards. 5. Fabrication: a. Sign Face Depth: 0.25 -inch thickness. b. Panel appearance: Manufacturer's standard, high contrast, semi -matte colors. C. Surface Texture: Matte Non -Glare. d. Letter style, size and layout position: Lettering shall be minimum 1 -inch high, unless otherwise indicated. The stroke of the uppercase letter "I" shall be 15% maximum of the height of the character. The width of the uppercase letter "0" shall be 60% minimum and 110% maximum of the height of the uppercase letter "I". Letter style to be Sans Serif, uppercase, accompanied by California Contracted (Grade 2) Braille directly below text at all locations where raised text is required. e. Text Schedule: Confirm text, symbols and numbering with the Architect and Owner. f. Sign Size: As indicated on drawings or if not shown, as required to accommodate text, symbols and Braille. Where signs are installed on window glazing, fabricate a blank sign back to match in size and shape to sign. Sign backs will cover back side of sign from view through window on opposite side of sign. Signs that are mounted back-to-back on glazing are to be matching in size; the smaller sign is to be increased in size as required to match the larger sign. g. Sign Shape: As indicated on drawings. Radiused corners, typical. 4 h. Inlaid Letter Adhesion Process: Inlaid material shall be adhered into 1/32 -inch deep routed sign face utilizing the heat and pressure bonded/chemically welded process as developed by Accent Signage Systems for the specified "Inlaid Tactile Sign". Sign manufacturers for the specified "Inlaid Tactile Sign" shall be familiar with and utilize the exact same manufacturing process developed by Accent Signage Systems. Manufacturer must utilize the same and required equipment, products and techniques as required to produce authentic "Inlaid Tactile Signs" as developed by Accent Signage Systems. Other adhesive products and methods, including applied adhesive tapes will not be accepted. The "Inlaid Tactile Sign" manufacturing process must include the following steps, equipment and products: 1) Use "Weld -On 16" adhesive as manufactured by IPS Corporation, no substitutions allowed. Other adhesives including adhesive tapes will not be accepted. Apply adhesive to recessed, routed areas utilizing an EFD manufactured dispensing machine for a uniform bead of adhesive without causing excess adhesive to squeeze out from edges. 3