WORK PLANS - Laserfiche WebLink

Home Browse Search

SIGNS Section 10445 15-1207 2) Immediately following the adhesive application, utilize a hot -stamping machine with a silicone pad at 90 derometer with a pressure of 50 pounds per square inch at 120 degrees for 10 seconds to press the inlaid letters into the sign face. This process will assure that the letters are uniformly adhered to the sign face. Please note that the adhesion of inlaid letters will be tested and that any text or symbols that can be removed from the sign face utilizing a utility knife, sharp object or other conventional methods will be considered a manufacturing defect. B. Sign Types: Room Identification Sign: Provide as shown on drawings. a. Provide name and room number at each door indicated. Names and numbers to be reviewed and approved by Architect and Owner prior to fabrication. Allow an average of 4 -numbers and 14 -letters for each sign. b. Sign to be as detailed on drawings and installed as directed on, or adjacent to, doors. 2. Toilet Room Identification Sign: In addition to the Door Sign listed below, provide a Toilet Room Identification Sign at the strike side of every toilet room door. Sign shall have a 6 -inch high International Symbol of Accessibility; 1 -inch tall raised lettering, specifying the room name to the left of the international symbol of accessibility with Grade #2 Braille translation below. Size and layout as shown on drawings. 3. Tactile Exit Sign: 6 inches wide by 3-1/2 inches high with raised text word "EXIT" and CA Braille below. See drawings for additional information and locations. 4. Tactile Exit Route Sign: To read: "EXIT ROUTE". Locate as shown in drawings. 2.02 PLASTIC SIGNS - NON -TACTILE A. Materials (typical unless otherwise noted): 1. Acceptable Product: Acrylic panel sign as manufactured and distributed by Ellis & Ellis Sign Systems, (916) 924-1936. 2. Sign Face: 1/4 -inch, matt finish, non -glare acrylic with subsurface vinyl and paint. Painted faces will not be accepted. 3. Colors: Colors shall match Tactile Signs as specified herein and will be those as selected by Architect and Owner. All integral materials shall be U.V. stabilized. Graphics and text shall be in high contrast with background color. 4. Fabrication: a. Letter style, size and layout position: Lettering shall be a minimum of 1 -inch high, unless otherwise indicated. The stroke thickness of the uppercase letter "I" shall be 15% maximum of the height of the character. The width of the uppercase letter "0" shall be 60% minimum and 110% maximum of the height of the uppercase letter "I". Letter style to be Sans Serif, uppercase. Non -Tactile Signs shall comply with 2013 CBC, Section 11 B-703.5. b. Text Schedule: Confirm text, symbols and numbering Architect and Owner using the shop drawing/submittal process. C. Sign Size: As indicated on drawings or if not shown, as required to accommodate text and symbols. Where signs are installed on window glazing, fabricate a blank sign back to match in size and shape to sign. Sign backs will cover back side of sign from view through window on 4