Laserfiche WebLink
METAL LOCKERS <br />Section 10500 <br />15-1207 <br />1.05 GUARANTEE <br />A. Refer to General Conditions and Section 01300. <br />B. Submit fully executed Guarantee with submittal package required by Article 1.04. <br />C. Submit in specified form covering materials and workmanship for a limited lifetime excluding <br />finish and installation. <br />1.06 REFERENCES AND STANDARDS <br />A. Title 24, Part 2, CCR, California Building Code. <br />B. ASTM A446 Steel Sheet. <br />C. Americans with Disabilities Act (ADA) <br />1.07 DELIVERY, STORAGE AND HANDLING <br />A. Deliver undamaged products to job in manufacturer's sealed containers and/or original <br />bundles with tags and labels intact. <br />B. Store materials in protected, dry conditions off of ground and in areas so as to not interfere <br />with the progress of the work. <br />C. Transport, store and handle in strict accord with the manufacturer's written <br />recommendations. <br />D. Make delivery to job when notified by Contractor verifying that the job is ready to receive the <br />work of this Section and that arrangements have been made to properly store, handle and <br />protect such materials and work. <br />1.08 QUALIFICATIONS <br />A. Installer to have a minimum of three (3) years experience with installations of same scope as <br />this project, and to have successfully completed a minimum of 4 installations of the same <br />scope as this project. <br />1.09 FIELD MEASUREMENTS <br />A. Make and be responsible for all field dimensions necessary for proper fitting and completion <br />of work. Report discrepancies to Architect before proceeding. <br />PART 2 - PRODUCTS <br />2.01 MANUFACTURERS <br />A. Acceptable Manufacturers: Subject to compliance with requirements of the contract <br />documents. Provide metal lockers by DeBourgh Manufacturing Company, or approved <br />2 <br />