Laserfiche WebLink
FOOD SERVICE <br />EQUIPMENT <br />Section 11400 <br />15-1207 <br />2 ea. Provide side mount bolt on side splashes. <br />ITEM 6 — WALL MOUNTED POT RACK (1 REQ'D) <br />Advance Tabco Model GW -36 <br />ITEM 7 - WALL MOUNTED SHELF (1 REQ'D) <br />Custom Model FABRICATED ITEM <br />Fabricated assembly in length and configuration as shown on the drawings and shall include the <br />following: <br />A. To be 16 gauge stainless steel construction, 1 1/2" turn down in front and 2" turn up at <br />back and right end and left ends. Provide 14 gauge stainless steel wall brackets as <br />shown. <br />B. Approximate Size: 12" deep by length shown on drawings. <br />ITEM 8 - THREE COMPARTMENT POT WASH SINK (1 REQ'D) <br />Custom Model FABRICATED ITEM <br />Fabricated assembly in length and configuration as shown on the drawings and shall include the <br />following: <br />A. Work area top to be 14 gauge stainless steel with a 14 gauge stainless steel backsplash <br />at back 2" thick with a 45 degree top edge to wall, turn down '/2' at back. Top to be <br />constructed with a "rolled" edge as shown. Drain boards are to slope per NSF <br />guidelines to sinks. <br />B. Three (3) 14 gauge stainless steel formed and welded sinks 24" x 30" x 12" deep. (Die <br />cast sink bows are not acceptable). <br />C. Provide and install 16 gauge stainless steel tubular legs, stainless steel welded leg <br />sockets, stainless steel adjustable feet and stainless steel cross rail bracing. <br />D. Provide 16 gauge stainless steel under shelf with 1 '/2" turn down at front and 2" turn up <br />at back. <br />E. Approximate size: 30" deep <br />Accessories: <br />2 ea. Fisher Model 60100 3/4" Faucet, 8" Backsplash, with 10" swing spout & elbows, <br />stainless steel construction. <br />3 ea. Fisher Model 22209 DrainKing Waste Valve, with flat strainer, 12 GPM drain rate, cast <br />red brass body. <br />ITEM 9 - PRE -RINSE SPRAY UNIT (1 REQ'D) <br />Fisher Model 13390 <br />Pre -Rinse Assembly, 8" c/c splash -mounted mixing valve, with spring action flexible gooseneck, with <br />spray head (1.15 gallons per minute @ 60 PSI), with wall bracket. <br />ITEM 10 - THREE STACK UTENSIL DRAWER UNIT (1 REQ'D) <br />Custom Model FABRICATED ITEM <br />Fabricated assembly in length and configuration as shown on the drawings and shall include the <br />following: To be fabricated of 16 gauge stainless steel complete with the following hardware items. <br />A. Provide stainless steel flush pull, Component Hardware Group, Inc., model no. <br />P63-1012, installed into the 18 gauge double -pan drawer front panel. <br />19 <br />