Laserfiche WebLink
PREFINISHED PLASTIC <br />LAMINATE CASEWORK <br />Section 12304 <br />16-1207 <br />completion of installation shall show no marks, indentations or other defects. Furnish scribes, <br />filler panels, trim and molding required for finished installation. When set, each individual <br />cabinet shall be capable of withstanding, without movement, a force of 200 lbs. applied in any <br />direction. <br />D. Method of attachment, including the type, size, frequency and/or spacing of anchoring <br />devises and fasteners shall comply to WI minimum requirements or be as indicated in the <br />plans or specifications, whichever is more restrictive. <br />E. Doors, drawers and fixtures shall operate correctly and smoothly. <br />F. Install countertops with concealed fastenings, securely attaching to cabinet bases or <br />countertop braces. Scribe neatly to walls or other adjoining surfaces. <br />G. Furnish all miscellaneous metal support and bracing required for installation. If necessary, <br />deliver these items to other trades responsible for installation into adjacent work and <br />designate exact location for their installation. <br />H. Provide specified seismic restraining, adjustable shelf supports at all adjustable shelves to <br />prevent shelf from sliding out of cabinets with or without doors. <br />Where indicated, install chemical storage cabinets securely to wall. Install vent pipe through <br />roof with weather cap, if indicated as a part of the cabinet assembly. <br />Install, at no additional charge, extra stock grommets where directed by Owner following <br />completion of casework installation. <br />3.06 ADJUSTING AND CLEANING <br />A. Prior to final inspection and acceptance by the Architect, completely check each installed item <br />and adjust for proper operation. <br />B. Remove all fingerprints, smudges and the like from casework; vacuum clean drawers and <br />interiors of dust, dirt and sawdust. <br />3.07 PROTECTION <br />A. Protect work and materials of this Section prior to and during installation and protect the <br />installed work and materials of other trades. Adjust all moving or operating parts to function <br />smoothly and correctly. <br />B. In the event of damage, make all repairs and replacements necessary to the approval of the <br />Architect at no additional cost to the Owner. <br />im <br />