WORK PLANS - Laserfiche WebLink

Home Browse Search

MECHANICAL GENERAL CONDITIONS Section 15010 15-1207 F. Conform to the State Energy Conservation Standards for all material and equipment. 2.02 MATERIALS FURNISHED: A. Identify all materials and equipment by manufacturer's name and model number. Remove unidentified materials and equipment from site. B. Equipment specified by manufacturer's number shall include all accessories, controls, etc. listed in catalog as standard with equipment. Furnish optional or additional accessories as specified. C. Equipment or material damaged during transportation, installation, or operation is considered as totally damaged. Replace with new equipment. Variance from this permitted only with written consent of the Architect. D. Deliver, Protection, and Care: 1. Deliver materials or equipment to the Project in the manufacturer's original, unopened, labeled containers. 2. Added costs associated with reordering, expediting orders, or project delays due to rejected materials shall be borne by the Contractor. 3. Protect from damage which may be caused by theft, weather, and building operations. Failure to protect materials and apparatus adequately shall be sufficient cause for rejection of any damaged material or equipment. 4. Close pipe and equipment openings to prevent intrusion of obstructions and damage. 5. Owner or Architect will require removal and replacement of such material or work from the premises which is not in accordance with Contract Documents. Replace unsatisfactory work without delay, at no additional cost to the Owner. 6. All material and equipment shall be protected against moisture, dirt and damage. Protective coverings shall be provided for bearings, open connections to pumps and tanks, coils, ducts, pipes and similar equipment that is vulnerable to grit and dirt. 7. The interior of the pipes and ducts shall be kept clean at all times. PART 3 - EXECUTION 3.01 GENERAL: A. General arrangement and location of piping, ductwork, equipment, etc. are shown on Drawings or herein specified. Carefully examine other work that may conflict with this work. Install this work in harmony with other crafts and at proper time to avoid delay of work. Provide all offsets as required to avoid other trades at no additional cost to the owner. B. In advance of construction, work out minor changes and relocations to suit actual conditions and work of other trades to avoid conflict therewith. This shall not be cause for additional cost. C. Execute any work or apparatus shown on the Drawings and not mentioned in the specifications, or vice versa, the same as if specifically mentioned by both. Omission from Drawings or specifications of any minor details of construction, installation, materials, or VA