SR0081937_OWTS - Laserfiche WebLink

Home Browse Search

Blinks red la alter 11 months Slinks red 3x after 12 months Blinks Greeen 3a Key 5 Tube Connections: Systems manufactured by IWP include color coded tubing and stickers to make installation simple. Connect the 3/8" tube to the faucet and to the outlet filter labeled "FAUCET" Connect the 1/4" or 3/8" Black tube to the drain saddle clamp and to the membrane reject labeled "DRAIN" Connect the 1/4"1111.tube to the angle stop adapter feed and to the filter labeled "INLET" Connect the 3/8"Maltube to the tank ball valve and to the filter labeled "TANK" immisom FAUCET li=111INLI4 1 TANK System Mounting: Measure the distance between the two mounting holes on the bracket and install two screws securely into an appropriate surface. You will need to locate studs or other secure mounting points. Most systems will include two #10 x 3/4" #2 Phillips pan head or truss head stainless steel sheet metal screws that can be used for mounting in certain applications. Use appropriate hardware based on the particular installation. Some systems include a standing base and do not need to be secured. Optional Timer Timer: The timer can be attached to a metal magnetic surface using the magnet that is factory installed on cartridge timer or to the metal plate with double sided tape that is included with the timer. Activate the timer by pulling the plastic tab out from the side of the timer. Press and release the button to verify the battery is operational. The light will blink green three times. The timer operates on a 12 month schedule.. The timer will begin to blink red once every three minutes after 11 months, and will blink red three times every three minutes after 12 months. Timer status of the cartridge life can also be viewed immediately by pressing and releasing the key. To reset the timer after filter cartridge replacement, press the key and hold for 5 seconds. The timer is now reset to 12 months. Replace the battery every 12 months. To replace the battery, locate the slot on the side of the timer body and carefully remove the front of the timer. Battery replacement will not reset the 12 month timer. If reset is required, press and hold button for 5 seconds. The timer uses a coin cell type 2023 battery