Laserfiche WebLink
❑ 9. Check Alarm/Control Panel and Air blower. <br />• Check to be sure that Alarm/Control Panel is located in a secure, accessible location. <br />• Check fittings and wire connections; they should be tight and secure. This includes connection <br />between air hose and pressure switch. <br />• Important: Check to be sure that all panel penetrations are air and watertight. Be sure no gas <br />from treatment system can leak into Alarm/Controller. <br />• Be sure electrical cord between blower and outlet is free and clear and no object is on cord. <br />• Check to be sure that panel is closed, secure and toggle switch is set to "Normal" setting. <br />• If alarm exists by Diaphragm is damaged or auto -stop function is activated, replace the <br />Diaphragm kid or re-insert the auto -stop piece. <br />• If alarm exists, check if blower is electrified and replace the power cable, the auto -stop piece <br />or the electric magnet. =A= <br />❑ 10. Final Site Preparation. <br />• Close and secure all access covers. <br />• Close and secure blower cover. <br />❑ 11. Owner Communication <br />• Be sure that business owner has a copy of the Fuji Clean USA Warranty information. <br />L. Fu iClean USA <br />T'—d Clean Water... <br />www.fum'cleanusa.com <br />SERVICE PROVIDER: <br />PHONE: <br />• Be sure that service provider contact information is affixed to Alarm/Control Panel. <br />41 <br />