SU0011914 - Laserfiche WebLink

Home Browse Search

Pacific Cas and Ele&irkc Company Water jetting to assist vacuum excavating must be limited to 1000 psig and directed at a 40° angle to the pipe_ All pile driving must be kept a minimum of 3 feet away. Any -plans to expose and support a PG&E gas transmission -pipeline across an open excavation need to be approved by PG&E Pipeline Services- in writing -PRIOR to performing the work. 6. Loring/Trenchless Installat-ions: PG&E Pipeline -Services must review and approve all plans to -bore across or parallel to (within 10 feet) a gas transmission pipeline. There are stringent -criteria-to pothole the gas transmission facility at regular intervals for all parallel bore installations. Forbore paths that cross gas transmission pipelines perpendicularly, the pipeline Must be potholed a minimum of 2 feet in the -horizontal direction of the bore path and a --minimum of 12 inches in the vertical direction from the bottom of the pipe with minimum clearances measured from the -edge of the pipe in both directions. Standby personnel must watch t"e locator trace (and every ream pass) the path of the bore -as it approaches the pipeline and visually monitor the pothole (with the exposed transmission pipe) as the bore traverses the pipeline to ensure adequate clearance with the. pipeline. The pothole width. must account for the inaccuracy of the locating equipment. T. Substructures: All utility crossings of a gas -pipeline should be made as -close to perpendicular as feasible (900 +/-15°). All utility lines crossing the gas pipeline must have a minimum of 12 inches of separation from the gas pipeline. Parallel utilities, pole bases, water- line aterline `kicker blocks', storm dram inlets, water meters, valves, back pressure devices or other utility substructures are not allowed in thaPG&E gas pipeline easement. If previously retired PG&E facilities are in conflict with proposed substructures, PG&E must verify -they are safe prior to removal. This includes verification testing of the contents of the facilities, as well as environmental testing of the coating and intemal surfaces. Timelines for PG&E completion of this verification will vary dependingonthe type and location of facilities in conflict. 8. Structures: No structures are to be built within the -PG&E -gas pipeline easement. This includes -buildings, retaining walls, fences, decks, patios, carports, septic tanks, storage sheds-, tanks, loading ramps, or any structure that could -limit PG&E's ability to access its facilities. 9. Fencing: Permanent fencing is -not allowed within PG&E easements except for perpendicular- crossings which must include a 16 foot wide gate for vehicular access. Gates will be secured with PG&E corporation locks. 10. Landscaping: Landscaping must be -designed to allow PG&E to access the pipeline for maintenance and not interfere with pipeline coatings or other cathodic protection systems. No trees, shrubs, brush, vines, and other vegetation may be planted within the easement area. Only those plants, ground covers, grasses, flowers, and low -growing plants that grow unsupported to a maximum of four feet (4') in height at maturity may be planted within the easement area. 11. Cathodic Protection: PG&E pipelines are protected from corrosion with an "Impressed Current" cathodic protection system. Any proposed facilities, such as metal conduit, pipes, PG&E Gas and Electric Facilities Page 3