SU0004228 - Laserfiche WebLink

Home Browse Search

1. COMMUNITY DEVELOPMENT DEPARTMENT (Staff Contact: Rick Griffin, (209) 468- 3154 ) a. BUILDING PERMIT: Submit an "APPLICATION-COMMERCIAL BUILDING PERMIT'. The Site Plan required as a part of the building permit must be prepared by a registered civil engineer or licensed architect. This Plan must show outdoor pallet storage areas, pallet repair area, office, any other structures, drainage, driveway access details including gates, on-site parking, landscaping, signs, existing and proposed utility services, and grading (refer to the "SITE PLAN CHECK LIST' for details). A fee is required for the Site Plan review. (Development Title Section 9-884) b. APPROVED USE: This approval is for a pallet repair facility to consist of a 1,749 square-foot office, a 3,000 square-foot covered pallet repair area, and outside storage of pallets as shown on the Site Plan dated January 16, 2004. (Use type: General Industrial-Intermediate) c. COMPLIANCE DATE: Because this development is currently operating without the required permits, the following time frame shall apply: (1) An Improvement plan shall be submitted within thirty (30) days from the date of approval. (2) The improvement plan and building permit shall be secured (issued) within sixty (60) days from the date of approval. (3) All Conditions of Approval shall be completed within 180 days from the issuance of the building permit. d. BUSINESS LICENSE: The applicant shall secure an approved Business License prior to the initiation of the use. The Business License may be applied for concurrently with the building permit application. (Section 7-1000 of the County Ordinance Code) e. STORM DRAINAGE: Stormwater drainage shall be retained on-site. The drainage pattern and corresponding storm drain improvements shall be shown on the Site Plan. Drainage calculations prepared by a registered civil engineer or architect shall be included. (Development Title Section 9-1135) f. PARKING: Off-street parking shall be provided and comply with the following: (1) All parking spaces, driveways, and maneuvering areas shall be surfaced and permanently maintained with base material of appropriate depth and asphalt concrete or Portland cement concrete to provide a durable, dust free surface. Bumper guards shall be provided when necessary to protect adjacent structures or properties. (Development Title Section 9-1015.5[e]) (2) Storage areas shall be surfaced with a minimum 4-inch aggregate base. (3) A minimum of 17 parking spaces shall be provided, including one accessible space, which shall be van accessible. Accessible spaces shall be located as 2