COMPLIANCE INFO_2022 - Laserfiche WebLink

Home Browse Search

Attachment I Description Pipeline Release Detection Method The evaluator, with help from the vendor, fills out this form prior to the start of the evaluation . This form provides a description of the method and how it works . It should be filled out completely — check all appropriate boxes for each question . If other is checked , provide a description . For those answers dependent on site conditions , give answers that apply in typical conditions . This form is to be filled out by the evaluator with assistance from the vendor before the start of the evaluation . Describe the important features of the method as indicated below. A detailed description is not required, nor is it necessary to reveal proprietary features of the system . Method Name and Version : Date . Applicability of the Method 1 . With what products can this method be used? (Check all applicable responses . ) .Xgasoline X diesel X aviation fuel X fuel oil #4 X fuel oil #6 X solvent X waste oil X other (specify) Biodiesels and ethanol blends 2 . What types of pipelines can be tested? (Check all applicable responses .) X fiberglass X steel X other (specify) This system can be used on any pipeline type including rigid, flex and semi -rigid _ 3 . Can this release detection method be used to test double-wall pipeline systems ? X yes (primary pipe) ❑ no 4 . What is the nominal diameter of a pipeline that can be tested with this method? _ 1 in. or less X between 1 and 3 in . X between 3 and 6 in. _between 6 and 10 in. other 5 . The method can be used on pipelines pressurized to 150 psi The safe maximum operating pressure for this method is 200 psi . 6 . Does the method conduct a test while a mechanical line leak detector is in place in the pipeline? ❑ Yes X no Pipeline Release Detection System Page 6