Laserfiche WebLink
Specifications And Aperating Data <br />' Measured from front of fillport to top of media (backwashed and drained). <br />2 Nominal capacity based on resin manufacturer's data. Actual capacity will vary with the Influent water characteristics, temperature, flow and other factors. <br />3 Flaw at 25 psi (172 kPa) pressure drop. Not recommended for extended periods of operation. <br />° Flow at 15 psi (103 kPa) pressure drop. <br />INSTALLATION AND OPERATING INSTRUCTIONS / 3 <br />CAPACITIES <br />FLOW RATES <br />Ion Exch. Media <br />Underbedding <br />Salt <br />Exchange <br />Service <br />Drain <br />Backwash/ <br />Brine <br />Slow <br />Storage <br />@ Salt <br />Amount <br />Amount <br />Freeboards <br />Tank <br />Dosagez <br />Peak3 <br />Cont.4 <br />Min. <br />Fast Rinse <br />Draw <br />Rinse <br />ft3 <br />Ib <br />in <br />Ib <br />Ib <br />gpm <br />gpm <br />gpm <br />gpm <br />gpm <br />gpm <br />L <br />kg <br />mm <br />kg <br />kg <br />Umin <br />Umin <br />Umin <br />L/min <br />L/min <br />L/min <br />MODELS <br />Type <br />Type <br />1.5 <br />30 <br />14 <br />350 <br />30 @° 9 <br />11 <br />8 <br />1.6 <br />3-4 <br />1.1 <br />0.7 <br />Coarse <br />45 @ 22.5 <br />PV -45A <br />Cullex® <br />#30 <br />42.5 <br />13.6 <br />13.6 <br />356 <br />356 <br />159 <br />159 <br />1 9444 @1 4. <br />42 <br />30 <br />6.1 <br />11-15 <br />4.2 <br />2.7 <br />2 9 @ 101 <br />2 <br />70 <br />16 <br />350 <br />40@ 12 <br />14 <br />10 <br />3 <br />4.7-6.5 <br />2.1 <br />1.5 <br />Coarse <br />60@ 30 <br />PV -60A <br />Cullex <br />#302 <br />56.6 <br />32 <br />406 <br />159 <br />592 @5.5 <br />38 <br />11 <br />11-15 <br />8.0 <br />5.7 <br />3 888 @ 13.6 <br />3 <br />70 <br />15 <br />6550 <br />60@ 18 <br />14 <br />10 <br />3 <br />4.7-6.5 <br />2.8 <br />2.0 <br />Coarse <br />90 @ 45 <br />PV -90A <br />Cullex <br />#30 <br />85.0 <br />32 <br />381 <br />295 <br />3 888 @ 8.2 <br />53 <br />38 <br />11 <br />18-25 <br />11 <br />7.6 <br />5 832 @ 20.4 <br />4 <br />70 <br />19 <br />650 <br />80@ 24 <br />14 <br />10 <br />3 <br />4.7-6.5 <br />3.3 <br />2.5 <br />Coarse <br />120 @ 60 <br />PV -120A <br />Cullex <br />#30 <br />113 <br />32 <br />483 <br />295 <br />5 184 @ 10.9 <br />38 <br />11 <br />18-25 <br />12 <br />9.5 <br />7 776 @ 27.2 <br />1.5 <br />30 <br />14 <br />350 <br />30@ 9 <br />35 <br />26 <br />1.6 <br />3-4 <br />1.1 <br />0.7 <br />Coarse <br />45 @ 22.5 <br />PB -45B <br />Cullex <br />#3042.5 <br />13.6 <br />356 <br />159 <br />1944 @ 4.1 <br />132 <br />98 <br />6.1 <br />11-15 <br />4.21 <br />2.7 <br />2 916 @ 10.2 <br />2 <br />70 <br />16 <br />650 <br />40@ 12 <br />48 <br />35 <br />3 <br />4.7-6.5 <br />2.1 <br />1.5 <br />Coarse <br />60 @ 30 <br />PV -60B <br />Cullex <br />#302 <br />592 @5.5 <br />56.6 <br />32 <br />406 <br />296 <br />3 888 @ 13.6 <br />180 <br />130 <br />11 <br />18-25 <br />8.0 <br />5.7 <br />3 <br />70 <br />15 <br />650 <br />60@ 18 <br />45 <br />33 <br />3 <br />4.7-6.5 <br />2.8 <br />2.0 <br />Coarse <br />90 @ 45 <br />PV -908 <br />Cullex <br />#30 <br />3 888 @ 8.2 <br />85.0 <br />32 <br />381 <br />295 <br />5 832 @ 20.4 <br />170 <br />120 <br />11 <br />18-25 <br />11 <br />7.6 <br />4 <br />70 <br />19 <br />650 <br />80 @ 24 <br />42 <br />31 <br />3 <br />4.7-6.5 <br />3.3 <br />2.5 <br />Coarse <br />120 @ 60 <br />PV -1208 <br />Cullex <br />#30113 <br />32 <br />483 <br />295 <br />5 184P 10.9 <br />160 <br />120 <br />11 <br />18-25 <br />12 <br />9.5 <br />7 776 @ 27.2 <br />5 <br />40 <br />14 <br />650 <br />90 @ 30 <br />54 <br />34 <br />3 <br />4.7-6.5 <br />3.9 <br />3.0 <br />Hi-VTM <br />Coarse <br />135 @ 75 <br />PV -1356 <br />Cullex <br />#30 <br />5830@ 13 <br />13 <br />142 <br />18.2 <br />356 <br />295 <br />.6 <br />8 750 @ .1 <br />204 <br />129 <br />11 <br />18-25 <br />15 <br />11 <br />' Measured from front of fillport to top of media (backwashed and drained). <br />2 Nominal capacity based on resin manufacturer's data. Actual capacity will vary with the Influent water characteristics, temperature, flow and other factors. <br />3 Flaw at 25 psi (172 kPa) pressure drop. Not recommended for extended periods of operation. <br />° Flow at 15 psi (103 kPa) pressure drop. <br />INSTALLATION AND OPERATING INSTRUCTIONS / 3 <br />