WORK PLANS - Laserfiche WebLink

Home Browse Search

11. TOILET ROOMS AND BATHING ROOM SIGNS SHALL COMPLY WITH SECTION 1113-703.5 SHEET INDEX AND SHALL INCLUDE THE INTERNATIONAL SYMBOL OF ACCESSIBILITY (ISA). REFERENCE CBC L SEC. 11 B-216.8. MPROVEMENT FOR .A TENANT I VISUAL CHARACTER SHALL COMPLY WITH SECTION 1113-703.5. EXCEPTION: WHERE VISUAL CHARACTERS COMPLY WITH SECTION 1113-703.2 AND ARE NO. SHEET DESCRIPTION ACCOMPANIED BY BRAILLE COMPLYING WITH SECTION 1113-703.3, THEY SHALL NOT BE REQUIRED TO COMPLY WTH SECTION 1113-703.5.2 THROUGH 1113-703.5.6, 118-705.5.8 AND INTERIOR DRAWINGS O 11 B-703.5.9. - rl CHARACTERS AND THEIR BACKGROUNDS SHALL HAVE A NON-GLARE FINISH. CHARACTERS 1 T 1 TITLE SHEET AND RESPONSIBILITY MATRIX H N SHALL CONTRAST WITH THEIR BACKGROUND WITH EITHER LIGHT CHARACTERS ON A DARK 2 A5.4 SITE PLAN _ BACKGROUND OR DARK CHARACTERS ON A LIGHT BACKGROUND. 3 A1.1 DEMO FLOOR AND CEILING PLAN CHARACTERS SHALL BE UPPERCASE OR LOWERCASE OR A COMBINATION OF BOTH. CHARACTERS SHALL BE CONVENTIONAL IN FORM. CHARACTERS SHALL NOT BE ITALIC, 4 A1.2 FLOOR AND EGRESS PLAN OBLIQUE, SCRIPT, HIGHLY DECORATIVE, OR OF OTHER UNUSUAL FORMS. 5 A1.3 FLOOR FINISH AND CEILING PLAN N TM CHARACTERS SHALL BE SELECTED FROM FONTS WHERE THE WIDTH OF THE UPPERCASE 6 A1.4 EQUIPMENT PLAN AND EQUIPMENT SCHEDULE „ ., SCHEDULE LETTER O IS 60 PERCENT MINIMUM AND 110 PERCENT MAXIMUM OF THE HEIGHT OF THE 7 A4.0 INTERIOR ELEVATION AN D FINISH SC UPPERCASE "1". 8 A4.1 INTERIOR ELEVATION AND DETAIL �� MINIMUM CHARACTER HEIGHT SHALL COMPLY WITH TABLE 1113-703.5.5 VIEWING DISTANCE 9 A5.0 ENLARGED RESTROOM AND DETAILS u H SHALL BE MEASURED AS THE HORIZONTAL DISTANCE BETWEEN THE CHARACTER AND AN 10 A5.1 STANDARD TYPICAL FRAMING DETAIL 0 w OBSTRUCTION PREVENTING FURTHER APPROACH TOWARDS THE SIGN. 11 A5.2 DETAILS u� CHARACTERS SHALL BE BASED ON THE UPPERCASE LETTER "I". W VISUAL CHARACTERS SHALL BE 40 INCHES MINIMUM ABOVE THE FINISH FLOOR OR GROUND. Q STROKE THICKNESS OF THE UPPERCASE "I" SHALL BE 10 PERCENT MINIMUM AND 20 PERCENT MAXIMUM OF THE HEIGHT OF THE CHARACTER. CHARACTER SPACING SHALL BE MEASURED BETWEEN THE TWO CLOSEST POINTS OF MECHANICAL DRAWINGS 127 S AVENUE ADJACENT CHARACTERS, EXCLUDING WORD SPACES, SPACING BETWEEN INDIVIDUAL _. - -- � f:14 CHARACTERS SHALL BE 10 PERCENT MINIMUM AND 35 PERCENT MAXIMUM OF CHARACTER 12 M1.0 MECHANICAL NOTES AND ABBREVIATIONS O HEIGHT. 13 M2.O MECHANICAL PLAN U SPACING BETWEEN THE BASE LINES OF SEPARATE LINES OF CHARACTERS WITHIN A 14 H1.0 HOOD DETAIL 1 MANTECA CALIFORNIA 95336 MESSAGE SHALL BE 135 PERCENT MINIMUM AND 170 PERCENT MAXIMUM OF THE 15 H2.0 HOOD DETAIL 2 a CHARACTER HEIGHT. TEXT SHALL BE IN A HORIZONTAL FORMAT. 16 H3.4 HOOD DETAIL 3 U d INTERNATIONAL SYMBOL OF ACCESSIBILITY SHALL COMPLY WITH SECTION 703.7. C'7 B ILDING COMPLIANCE NOTES FIRE DEPARTMENT NOTES 12. 1113-703.6 PICTOGRAMS. PICTOGRAMS SHALL COMPLY WITH SECTION 1113-703.6 PLUMBING DRAWINGS H GENERAL NOTES U 1113-703.6.1 PICTOGRAM FIELD. PICTOGRAMS SHALL HAVE A FIELD HEIGHT OF 6 INCHES - (152 MM) MINIMUM. CHARACTERS AND BRAILLE SHALL NOT BE LOCATED IN THE PICTOGRAM 17 P1.0 PLUMBING NOTES AND ABBREVIATIONS 1. THE GENERAL CONTRACTOR IS RESPONSIBLE FOR CHECKING CONTRACT DOCUMENTS, 1. ALL PHASES OF THE WORK SHALL CONFORM TO THE MINIMUM STANDARDS OF THE 4. ALL FIRE RATED EXIT CORRIDOR DOORS SHALL BE PROTECTED WITH A SMOKE OR FIELD. 18 P2-0 PLUMBING DIAGRAMS AND DETAILS _ _ � Ln FIELD CONDITIONS AND DIMENSIONS FOR ACCURACY AND CONFIRMING THAT WORK CAN BE CURRENT EDITION OF LOCAL CITY BUILDING CODE AND ALL STATE, COUNTY AND LOCAL DRAFT STOP FIRE ASSEMBLY HAVING A 20 MINUTE RATING AND SHALL HAVE A SELF 1113 703.6.2 FINISH AND CONTRAST. PICTOGRAM AND THEIR FIELD SHALL HAVE NON-GLARE CLOSING DEVICE. FINISH. PICTOGRAMS SHALL CONTRAST WITH THEIR FIELD WITH EITHER A LIGHT PICTOGRAM CONSTRUCTED BEFORE PROCEEDING. ANY QUESTIONS SHALL BE PRESENTED TO THE ORDINANCES THAT MAY APPLY. 5. FIRE DAMPERS OR DOORS SHALL BE PROVIDED WHERE "AIR DUCTS PENETRATE FIRE DESIGNER AND/OR TENANT CONSTRUC-PON COORDINATOR FOR CLARIFICATION BEFORE 2. WHEN SANITARY FACILITIES ARE LOCATED ON ACCESSIBLE FLOORS OF A BUILDING, RATED WALLS OR CEILINGS. ON A DARK FIELD OR A DARK NS. PICTOGRAMS ON A LIGHT FILED. O COMMENCING WORK INVOLVED. THEY SHALL BE MADE ACCESSIBLE TO THE DISABLED. 1113-703.6.3 TEXT DESCRIPTIONS. PICTOGRAMS SHALL HAVE TEXT DESCRIPTIONS LOCATED O I 2. THE SCOPE OF WORK MAY INCLUDE DEMOLITION, OR REMOVAL AND REINSTALLATION 3. THE CENTER OF RECEPTACLE OUTLETS SHALL BE NOT LESS THAN 15 INCHES ABOVE INTERIOR FINISHESfFLAME RETARDANT DIRECTLY BELOW 11�E PICTOGRAM FIELD. TEXT DESCRIPTIONS SHALL COMPLY WITH SECTION ELECTRICAL DRAWINGS OF MATERIALS OR EQUIPMENT. REMOVE, REVISE RELOCATE AND REINSTALL AS REQUIRED. THE FLOOR OR WORKING PLATFORM. 1. TYPICAL INTERIOR WALL AND CEILING FINISHES SHALL NOT EXCEED FLAME SPREAD OF 1113_703.2, 1113--703.3 AND 118-703.4. NG HANDLE OF SWITCHES INTENDED TO BE 200. INTERIOR WALL AND CEILING FINISHES AT EXIT CORRIDORS SHALL NOT EXCEED 19 E0.0 SPECIFICATIONS x ITEMS REMOVED ARE TO BE STORED FOR POSSIBLE REUSE AT THE DIRECTION OF THE 4. THE CENTER OF THE GRIP OF THE OPERATING FLAME SPREAD OF 75. 13. 11B-703.7 SYMBOLS OF ACCESSIBILITY. SYMBOLS OF ACCESSIBILITY 1113-703.7.1 FINISH 20 E1.0 LIGHTING PLANS TENANT CONSTRUCTION COORDINATOR, OR DISPOSED OF OFF SITE, IF SO DIRECTED. USED BY THE OCCUPANT OF THE ROOM OR ARE TO CONTROL LIGHTING AND RECEPTACLES 2 ANY DECORATIONS USED SHALL BE NONCOMBUSTIBLE OR FLAME PROOFED IN A - - - ALS ARE TO DISPOSED OF OFF SITE ON A DAILY BASIS. OUTLETS, COOLING, HEATING AND VENTILATING EQUIPMENT, SHALL BE NO LESS THAN AND CONTRAST. SYMBOLS OF ACCESSIBILITY AND THEIR BACKGROUND SHALL HAVE A 21 E2 0 POWER PLANS DEMOLITION MATERIALS 3. THE CONTACTOR AND SUBCONTRACTORS SHALL PURCHASE AND MAINTAIN THREE FEET AND NO MORE THAN FOUR FEET ABOVE THE FLOOR OR WORKING PLATFORM. MANNER APPROVED BY THE GOVERNING JURISDICTION. NON-GLARE FINISH. SYMBOLS OF ACCESSIBILITY SHALL CONTRAST WTH THEIR BACKGROUND TITLE 24 22 E3.0 FIRE PROTECTION EQUIPMENT WITH EITHER A LIGHT SYMBOL ON A DARK BACKGROUND OR A DARK SYMBOL ON A LIGHT � CERTIFICATIONS OF INSURANCE WITH RESPECT TO WORKMAN'S COMPENSATION, PUBLIC BACKGROUND. LIABILITY AND PROPERTY DAMAGE FOR THE LIMITS REQUIRED BY LAW. THE CONTRACTOR 5• THE INTERNATIONAL SYMBOL OF ACCESSIBILITY SHALL BE THE STANDARD USED TO 1• PROVIDE A PORTABLE FIRE EXTINGUISHER SEE PLAN. LOCATE ALL FIRE 23 E4.0 TITLE 24 SHALL BE RESPONSIBLE FOR INITIATING, MAINTAINING AND SUPERVISING ALL SAFETY IDENTIFY FACILITIES THAT ARE ACCESSIBLE TO AND USEABLE BY DISABLED PERSONS AS EXTINGUISHERS IN RECESSED OR SEMI-RECESSED CABINETS, MOUNTED AT +48". 1113-703.7.2 SYMBOLS 1113-703.7.2.1 INTERNATIONAL SYMBOL OF ACCESSIBILITY. _ W SET FORTH IN THESE BUILDING STANDARDS. THE SYMBOL SPECIFIED ABOVE SHALL GENERAL NOTES THE INTERNATIONAL SYMBOL OF ACCESSIBILITY SHALL COMPLY WITH FIGURE 1113- 703.7.2.1 CONSIST OF A WHITE FIGURE ON A BLUE BACKGROUND. THE BLUE SHALL BE EQUAL TO 1. LOCATIONS AND CLASSIFICATION OF FIRE EXTINGUISHER SHALL BE ACCORDANCE WITH THE SYMBOL SHALL CONSIST OF A WHITE FIGURE ON A BLUE BACKGROUND. THE BLUE PRECAUTIONS IN CONNECTION WITH THE WORK. 4. THE GENERAL CONTRACTOR SHALL APPLY FOR AND OBTAIN, AT THE CONTRACTOR'S COLOR NO. 15090 IN FEDERAL STANDARD 595 A. THE CALIFORNIA FIRE CODE STANDARD 10--1 AND PLACEMENT IS SUBJECT TO THE SHALL BE COLOR NO, 15090 IN FEDERAL STANDARD 595B. SHALL- COMPLY WITH SECTION mC s :R .,:.CO EXPENSE, ALL NECESSARY CONSTRUCTION PERMITS REQUIRED BY ALL APPLICABLE BUILDING APPROVAL OF THE FIRE INSPECTOR. 11 B---703.7. Q ■CALIFORNIA COUNCIL FOR CODES AND GOVERNING AGENCIES. 6. IF EMERGENCY WARNING SYSTEMS ARE REQUIRED, THEY SFTALL ACTIVATE A MEANS OF 2. STORAGE, DISPENSING OR USE OF ANY FLAMMABLE COMBUSTIBLE LIQUIDS, FLAMMABLE DEFERRED SUBMITTAL 5. THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR PROVIDING ALL WORK AND WARNING THE HEARING IMPAIRED. FLASHING VISUAL WARNING SHALL HAVE A FREQUENCY AND COMPRESSED GASES, AND OTHER HAZARDOUS MATERIALSSHALL COMPLY WITH 14. 1IB-703.7.2.6 TOILET AND BATHING FACILITIES GEOMETRIC SYMBOLS. DOORWAYS Q 0 MATERIALS IN ACCORDANCE WITH ALL REGULATORY AGENCIES AND APPLICABLE BUILDING CALIFORNIA FIRE CODE REGULATION. STORAGE AND USE OF HAZARDOUS MATERIALS SHALL LEADING TO TOILET ROOMS AND BATHING ROOMS AND BATHING ROOMS SHALL BE SIGN PACKAGE (INTERIOR AND EXTERIOR) " a CODES OR REQUIREMENTS. OF NOT MORE THAN 60 FLASHES PER MINUTE. BE APPROVED BY THE NEWPORT BEACH PRIOR TO ANY MATERIALS BEING STORED OR IDENTIFIED BY A GEOMETRIC SYMBOL COMPLYING WITH SECTION 1113-703.7.2.6. THE SYMBOL SPRINKLER SYSTEM (11= REQUIRED) � C �F "''• ;a 6. THE GENERAL CONTRACTOR SHALL VERIFY THAT NO CONFLICT EXISTS IN THE 7 HAND ACTIVATED DOOR OPENING HARDWARE SMALL BE CENTERED BETWEEN 34 AND USED ON-SITE. A SEPARATE PLAN SUBMITTAL IS REQUIRED PRIOR TO THE STORAGE & SHALL BE MOUNTED AT 58 INCHES (1473 MM) MINIMUM AND 80 INCHES (1524 MM) FIRE ALARM SYSTEM (IF REQUIRED) W Cn LOCATIONS OF ALL MECHANICAL, TELEPHONE, ELECTRICAL, AND PLUMBING EQUIPMENT 44 INCHES ABOVE THE FLOOR, RESTRUCTURED 2013 CBC 118.404.2.7. USE OF HAZARDOUS MATERIALS. MAXIMUM ABOVE THE FINISH FLOOR OR GROUND SURFACE MEASURED FROM THE WALK-IN COOLER AND RELATED MECHANICAL UNITS (INCLUDING CONDUIT AND PIPING) AND THAT REQUIRED CLEARANCES FOR ACCESS AND 3. BUILDINGS NOT APPROVED FOR HIGH-PILED STORAGE (MATERIALS IN CLOSELY PACKED CENTERLINE OF THE SYMBOL, WHERE A DOOR IS PROVIDED THE SYMBOL SHALL BE ? Z EQUIPMENT MAINTENANCE ARE PROVIDED. n E SPECIFIED BY BRAND NAME TO ESTABLISH STANDARDS OF QUALITY 8. LATCHING AND LOCKING DOORS THAT ARE HAND ACTIVATED AND WHICH ARE IN A PILES OR ON PALLETS, OR IN RACKS WHERE THE TOP OF STORAGE EXCEEDS 12' IN MOUNTED WITHIN 1 INCH (25 MM) OF THE VERTICAL CENTERLINE OF THE DOOR. "' � 7. MATERIALS ARE PATH OF TRAVEL, SHALL BE OPERABLE WITH A SINGLE EFFORT 8Y LEVER TYPE HEIGHT, AND 6'FOR GROUP A PLASTICS AND CERTAIN OTHER HIGH-HAZARD COMMODITIES). 1113-703.2.6.1 MEN'S TOILET AND BATHING FACILITIES. MEN'S TOILET AND BATHING AND PERFORMANCE. ANY REQUEST FOR SUBSTITUTION IS TO BE SUBMITTED TO THE TAN HAMEDANI HARDWARE, PANIC BARS, PUSH-PULL ACTIVATING BARS, OR OTHER HARDWARE DESIGNED HIGH PILED STORAGE SHALL BE APPROVED 8Y THE NEWPORT BEACH PRIOR TO MATERIALS FACILITIES SHALL BE IDENTIFIED BY AN EQUILATERAL TRIANGLE, � INCH (6.4 MM) THICK T DESIGNER AND/OR TENANT CONSTRUCTION COORDINATOR FOR REVIEW A MINIMUM OF TEN AND APPROVED FOR PASSAGE WITHOUT REQUIRING THE ABILITY TO GRASP THE OPENING BUILDING DATA AND CODES RTIFIED ES 06.26-17 DESIGNER n BEING STORED ON-SITE. A SEPARATE PLAN SUBMITTAL IS REQUIRED FOR HIGH PILED WITH EDGES 12 INCHES (305 MM) LONG AND A VERTEX POINTING UPWARD. THE TRIANGLE ,� 87 EXPIRES 06.26-17 WORKING DAYS PRIOR TO THE LATEST REASONABLE DATE FOR ORDER OF MATERIALS TO HARDWARE. STORAGE IN ACCORDANCE WITH THE CALIFORNIA FIRE CODE, ARTICLE 81. MAINTAIN THE AGREED CONSTRUCTION SCHEDULE. SYMBOL SHALL CONTRAST WITH THE DOOR, EITHER LIGHT ON A DARK BACKGROUND OR OF 4. ALL WEATHER FIRE ACCESS ROADS SHALL BE APPROVED BY THE AHJ & IN PLACE DARK ON A LIGHT BACKGROUND. z a l I 0 N f10 0 tl I N 0 I I tl 0■ z 8. NOTIFY THE DESIGNER OF AVAILABILITY OF SPECIFIED MATERIALS AT THE TIME 9. MAXIMUM EFFORT TO OPERATE DOORS SHALL NOT EXCEED S.0 POUNDS FOR EXTERIOR ALL MATERIALS NG BEFORE ANY COMBUSTIBLE MATERIALS ARE PLACED ON THE SITE. ACCESS ROADS SHALL 118-703.7.2.6.2 WOMEN'S TOILET AND BATHING FACILITIES. WOMEN'S TOILET AND BATHING BIDDING. SHOULD NO NOTIFICATION BE GIVEN, IT SHALL BE ASSUMED THATDOORS AND 5 POUNDS FOR INTERIOR DOORS, SUCH PULL OR PUSH EFFORTS BFI ARE AVAILABLE IN A TIME FRAME G ALLOW HALL BE A OF ALL WORK WITHIN THE BE MAINTAINED CLEAR OF OBSTRUCTIONS. PROJECT SCOPE: TENANT IMPROVEMENT OF EXISTING SHELL AGREED CONSTRUCTION SCHEDULE. APPLIED AT RIGHT ANGLES TO HINGED DOORS AND AT THE CENTER PANE OF SLIDING OF 5• ACCESS GATES SHALL BE IN COMPLIANCE WITH CALIFORNIA FIRE CODE, SECTION 902 FACILITIES SHALL BE IDENTIFIED BY A CIRCLE, INCH CONTRAST T THICK AND 12 INCHES PROVIDE PROTECTIVE COVERING FOR BOTH NEW FOLDING DOORS. COMPENSATING DEVICES OR AUTOMATIC DOOR OPERATORS MAY BE AND AHJ GUIDELINES. A SEPARATE PLAN SUBMITTAL AND APPROVAL 8Y AHJ IS REQUIRED. (305 MM) IN DIAMETER. THE CIRCLE SYMBOL SHALL CONTRAST WITH THE DOOR, TITHER BLDG. FOR DELI DELICIOUS SHOP. 9. THE GENERAL CONTRACTOR SHALL UTILIZED TO MEET THE ABOVE STANDARDS. WHEN FIRE DOORS ARE REQUIRED, THE (NO CHANGE OF USE) AND EXISTING FINISHES DURING CONSTRUCTION, AND SHALL REPAIR ANY DAMAGES CAUSED MAXIMUM EFFORTS TO OPERATE THE DOOR MAY BE INCREASED NOT TO EXCEED 15 LBS. 6. PLANS OF NEW OF MODIFICATIONS TO EXISTING FIRE PROTECTION, DETECTION, ALARM LIGHT ON A ARK BACKGROUND OR DARK ON A LIGHT BACKGROUND. OR MONITORING SYSTEM(S) SHALL BE APPROVED BY THE N.B.F.D. PRIOR TO INSTALLATION,BY THEIR FORCES OR THOSE OF ANY SUBCONTRACTOR. ANY REVISIONS OR ADDITIONAL WORK REQUIRED BY TENANT, FIELD CONDITIONS (EXCEPT SLIDING AND AUTOMATIC A SEPARATE PLAN SUBMITTAL & APPROVAL BY THE OCFA IS REQUIRED PRIOR TO THE TOTAL AREA 1,506 S.F. 10. A ONS OR 10. THE BOTTOM 10 OF ALL DOORS (E ) SHALL HAVE A COMMENCEMENT OF ANY WORK. LOCAL GOVERNING AGENCIES SHALL BE BROUGHT TO THE ATTENTION OF THE DESIGNER SMOOTH UNINTERRUPTED SURFACE TO ALLOW THE DOOR TO BE OPENED BY A WHEELCHAIR AND/OR TENANT CONSTRUCTION COORDINATOR BEFORE PROCEEDING REGARDLESS OF COST, FOOTREST WITHOUT CREATING A TRAP OR HAZARDOUS CONDITION, WHERE NARROW FRAME 7. THE FIRE INSPECTOR MAY REQUIRE A LETTER OF INTENDED USE OF STRUCTURE(S)8. PRIOR TO THE APPROVAL OF PLANS, PROJECTS WTH NEW CONSTRUCTIONS OR FINISH NOTES BUILDING CODE COMPLIANCE: C.B.C. (2013) EDITION TIME, OR MATERIALS REQUIRED. DOORS ARE USED, A 10 INCH HIGH SMOOTH PANEL SHALL BE INSTALLED ON THE PUSH C.M.C. (2013) EDITION ADDITIONS TO EXISTING STRUCTURE, FLANS AND DOCUMENTATION FOR FIRE DEPARTMENT 11. UPON COMPLETION OF THE PROJECT, THE GENERAL CONTRACTOR SHALL SUBMIT A SIDE OF THE DOOR, WHICH WILL ALLOW THE DOOR TO BE OPENED BY A WHEELCHAIR FINALIZED CERTIFICATE OF OCCUPANCY TO THE BUILDING OWNER. FOOTREST WITHOUT CREATING A TRAP OR HAZARDOUS CONDITION. ACCESS, HYDRANT LOCATIONS, WATER AVAILABILITY AND FIRE LANE MARKINGS SHALL BE C.P.C. (2013) EDITION 12. DIMENSIONS ARE NOT ADJUSTABLE WITHOUT REVIEW OF THE DESIGNER AND/OR SUBMITTED TO AND APPROVED BY THE AHJ. AN AHJ APPROVED SITE PLAN SHALL BE 1. PROVIDE 2-1/2" (CONFIRM, PLEASE) RUBBER BASE AT ALL WALLS NOTED. C.E.C. (2013) EDITION SUBMITTED WITH THE PLANS. FURNISH COVE BASE AT AREAS RECEIVING HARD SURFACE FLOORING, AND STRAIGHT C.F.C. (2013) EDITION TENANT CONSTRUCTION COORDINATOR UNLESS NOTED (+/-). 11. EVERY REQUIRED ENTRANCE OR PASSAGE DOORWAY SHALL BE OF A SIZE AS TO 9. IN STRUCTURES OF UNDETERMINED USE, THE MIN. FIRE SPRINKLER DESIGN DENSITY BASE AT ALL CARPETED AREAS. 13. DO NOT SCALE DRAWINGS, GIVEN DIMENSIONS GOVERN. LARGER SCALE DRAWINGS PERMIT THE INSTALLATION OF A DOOR NOT LESS THAN THREE FEET IN WITH AND NOT OCCUPANCY GROUP: "B" GOVERN OVER SMALLER SCALE DRAWINGS. LESS THAN SIX FEET EIGHT INCHES IN HEIGHT. DOORS SHALL BE CAPABLE OF OPENING REQUIRED SHALL BE ORDINARY HAZARD (GROUP 2) WITH A DESIGN AREA OF 3000 2. INSTALL RESILIENT 'DOME TYPE' TRANSITION STRIP WHERE CARPET TERMINATES AT SQUARE FEET. RESILIENT FLOORING. EXISTING CONSTRUCTION TYPE: "TYPE V-B",FULLY SPRINKLERED 14. "TYPICAL" MEANS IDENTICAL FOR ALL SIMILAR CONDITIONS UNLESS OTHERWISE NOTED. AT LEAST NINETY DEGREES AND SHALL BE MOUNTED SO THAT THE CLEAR WIDTH OF THE EIGHTS ARE GIVEN FROM THE TOP OF THE EXISTING LOWER LEVEL SLAB DOORWAY IS NOT LESS THAN 32 INCHES WITH THE DOOR AT 90 DEGREES TO THE10. AN AUTOMATIC EXTINGUISHING SYSTEM SHALL BE PROVIDED TO PROTECT 3. CONTRACTOR TO ENSURE SURFACES SCHEDULED TO RECEIVE FINISHES ARE CLEAN, 15. ALL H COMMERCIAL-TYPE FOOD HEAT PROCESSING EQUIPMENT THAT PRODUCES GREASE-LADEN TRUE, AND FREE OF IRREGULARITIES. DO NOT PROCEED WITH WORK UNTIL UNLESS NOTED "AFF" (ABOVE FINISHED FLOOR) AT LOCAL CONDITIONS. CLOSED POSITION. ONE DOOR OF A PAIR OF DOORS SHALL MEET THE MINIMUM WIDTH VAPORS. A SEPARATE PLAN SUBMITTAL IS REQUIRED FOR THE INSTALLATION OF SYSTEM UNSATISFACTORY CONDITIONS HAVE BEEN CORRECTED. STARTING OF WORK SHALL NUMBER OF STORIES: 1 {ONE) EXISTING 16. ALL DIMENSIONS GIVEN ARE FROM FACE OF FINISH OF PARTITIONS OR OTHER REQUIREMENTS. AND SHALL BE IN ACCORDANCE WITH CFC ARTICLE 10, NFPA 17A AND 96. INDICATE ACCEPTANCE BY THE INSTALLER OF THE SUBSTRATE. NUMBER OF EMPLOYEE: 3 PER SHIFT INCLUDING MANAGER CONSTRUCTION UNLESS OTHERWISE NOTED. 4. WHERE DEMOLITION AFFECTS WALL, CEILING, CARPET, ETC. TO REMAIN, PATCH AND 17. ALL WORK NOTED "N.I.C." OR "NOT IN CONTRACT" IS TO BE ACCOMPLISHED BY A 12. MAXIMUM HEIGHT OF THRESHOLD TO BE 1/2". MAXIMUM VERTICAL CHANGE AT EDGE SIGNS & IDENTIFICATION REFINISH TO PROVIDE 'LIKE NEW APPEARANCE. CONTRACTOR OTHER THAN THE GENERAL CONTRACTOR AND IS NOT TO BE A PART OF IS 1/4" WITH A MAXIMUM BEVEL OF 22 DEGREES. 5. UNLESS NOTED OTHERWISE, PROVIDE A MINIMUM THREE COAT PAINT SYSTEM AS THE CONSTRUCTION AGREEMENT. THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR SPECIFIED FOR EACH SUBSTRATE. REFER TO FINISH SCHEDULE FOR COLORS AND COORDINATING THE SCHEDULING AND INSTALLATION OF "NOT IN CONTRACT" (N.I.C.) ITEMS 13. THE WIDTH OF THE LEVEL AND CLEAR AREA ON THE SIDE TO MICH THE DOOR 1 THE INTERNATIONAL SYMBOL OF ACCESSIBILITY SHALL BE THE STANDARD USED TO SHEENS. CODE ANALYSIS WITH OTHER TRADES. SWINGS SHALL EXTEND 18 INCHES PAST THE STRIKE EDGE FOR INTERIOR DOORS. IDENTIFY FACILITIES THAT ARE ACCESSIBLE TO AND USABLE BY PHYSICALLY DISABLED 6. ALL WALLS SCHEDULED TO RECEIVE WALLCOVERING SHALL BE PREPARED WITH ONE 18, THE GENERAL CONTRACTOR SHALL VERIFY OPENING CLEARANCES FOR DELIVERY OF PERSONS AS SET FORTH IN TITLE 24 AND AS SPECIFICALLY REQUIRED IN THIS SECTION. COAT OF SEALER AND/OR PRIMER IN A FLAT FINISH AND PREPARED IN ACCORDANCE USE: AREA LOAD FACTOR OCCUPANTS NEW EQUIPMENT AND MATERIAL. 14. 50% OF CONSTRUCTION WASTE SHALL BE RECYCLED. WITH MANUFACTURER'S RECOMMENDATIONS FOR INSTALLATION. 19. THE CONTRACTOR SHALL PROVIDE ALL NECESSARY BLOCKING, BACKING, FRAMING, 2. THE INTERNATIONAL SYMBOL OF ACCESSIBILITY SHALL CONSIST OF A WHITE FIGURE ON 7. Aql_ MILLWORK AND DOORS SHALL BE PROVIDED WITH SHOP FINISH TO MATCH HANGERS OR OTHER SUPPORT FOR ALL FIXTURES, EQUIPMENT OR CABINETRY REQUIRING 15. DOOR CLOSERS AND GATE CLOSERS SHALL BE ADJUSTED SO THAT FROM AN OPEN A BLUE BACKGROUND. THE BLUE SHALL BE EQUAL TO COLOR NO. 15090 IN FEDERAL SPECIFICATIONS NOTED ON THE DRAWINGS. SALE SS P 210 S.F. 15 29 POSITION OF 90 DEGREES, THE TIME REQUIRED TO MOVE THE DOOR TO A POS111ON OF 12 EGRESS PATH OF TRAVEL 210 S.F. 100 3 THE SAME. SECONDS MINIMUM. STANDARD 5998. 8. SUBMIT SAMPLES OF ALL FINISHES FOR DESIGNER'S REVIEW PRIOR TO PROCEEDING, -u c� 20. CORING OF THE CONCRETE SLAB, OR OTHER NOISY DEMOLITION IS TO BE PERFORMED DEGREES FROM THE LATCH {S 5 SE DURING NON BUSINESS HOURS. ALLOWING TIME FOR SUBMITTAL REVIEW AND FOR RESUBMITTALS AS REQUIRED: SERVICE AREA 303 S.F. 200 2 X 3. LETTERS AND NUMBERS ON SIGNS SHALL HAVE A WIDTH-TO-HEIGHT RATIO OF PAINT: (3) 8 1/2" X 11" BRUSHOUT SAMPLES OF ACTUAL FINISH PRODUCTION AREA 493 S.F. 200 3 � 1 21. IF CONSTRUCTION IS PHASED TWO OR MORE PHASES, THE CONTRACTOR SHALL FIRE DEPARTMENT NOTES BETWEEN J:5 AND 1:1 AND A STROKE WIDTH-TO-W=IGHT RATIO BETWEEN 1:5 AND 1:10. VIFLOORING: (3) SAMPLES OF EACH MATERIAL 70 8E USED RESTROOM 72 S.F. 200 1 PROVIDE ADEQUATE PHYSICAL ISOLATION OF THE AREA OF CONSTRUCTION TO PROVIDE SAFETY OF ON SIGNS SHALL BE SIZED ACCORDING TO THE VIEWING •[� MINIMUM DISRUPTION OF BUSINESS AND TO PROTECT THE HEALTH AND 5A 4. CHARACTERS AND NUMBERS TENANTS AND CLIENTS. 1, TITLE 19 EVACUATION SIGNAGE SHALL BE PROVDED PER GOVERNING JURISDICTION. DISTANCE FROM WHICH THEY ARE TO BE READ. THE MINIMUM HEIGHT IS MEASURED USINGNPDES NOTES •�' 22. PROVIDE COMPLETE SHOP DRAWINGS AND/OR MANUFACTURER'S DATA SHEETS FOR 2. POCKET FIRE DOOR SHALL BE SUBJECT TO FIELD TEST BY FIRE INSPECTOR, AN UPPER CASE X. LOWER CASE CHARACTERS ARE PERMITTED. FOR SIGNS SUSPENDED O� TICONTRACTOR OR PROJECTED ABOVE THE FINISH FLOOR IN COMPLIANCE, THE MINIMUM CHARACTER TOTAL 1,506 S.F. (NO CHANGE OF SQUARE FT.) 38 PHYSICAL SAMPLES OF ALL NON BUILDING STANDARD HARDWARE AND FINISHES TO PROVIDE METER FOR ANY . H ALL MILLWORK, ELECTRICAL AND LIGHTING DEVICES, H.V.A.C. EQUIPMENT AND DIFFUSERS. 3. EMERGENCY LIGHTING TO MEET GOVERNING JURISDICTION REQUIREMENTS. PROVIDE P REQUESTED TESTINGHEIGHT SHALL BE 3". STORM WATER POLLUTION PREVEN110N DEVICES AND PRACTICES SHALL BE INSTALLED � � VIAL. 4. THE GENERAL CONTRACTOR IS TO IDENTIFY ALL UTILITY ROOMS WITH EXTERIOR DOOR 5 CHARACTERS AND SYMBOLS SHALL CONTRAST WITH THEIR BACKGROUND. FOR APPROVAL. AND/OR INSTITUTED AS NECESSARY TO ENSURE COMPLIANCE TO THE CITY OF MANTECA SIGNS. 6. WHEN RAISED CHARACTERS OR SYMBOLS ARE USED, THEY SHALL CONFORM TO THE 5. COMMERCIAL DUMPSTERS AND CONTAINERS SHALL COMPLY WITH CFC REQURIEMENTS. WATER QUALITY STANDARDS CONTAINED IN CHAPTER 3. WATER, OF DIVISION 8 OF TITLE 6 � CONSTRUCTION NOTES FOLLOWING: OF THE MANTECA MUNICIPAL CODE AND ANY EROSION PLAN ASSOCIATED WITH THIS SIGNS: A. LETTERS AND NUMBERS ON SIGNS SHALL BE RAISED 1/32" MINIMUM AND SHALL BE PROJECT. ALL SUCH DEVICES AND PRACTICES SHALL BE MAINTAINED, INSPECTED AND/OR SITE MAP 1. EXIT LIGHTING AND SIGNS SHALL CONFORM TO TITLE 24 AND CBC REQUIREMENTS AND SANS-SERIF UPPERCASE CHARACTERS ACCOMPANIED BY GRADE 2 BRAILLE. SHALL HAVE 6" HIGH STROKE LETTERING ON CONTRASTING BACKGROUND, LOCATED AS B RAISED CHARACTERS OR SYMBOLS SHALL BE A MINIMUM OF 5/8" HIGH. MONITORED TO ENSURE ADEQUACY AND PROPER FUNCTION THROUGHOUT THE DURATION OF / 1. THE CONTRACTOR SHALL BE RESPONSIBLE FOR MSITING THE JOBSITE AND BEING INDICATED ON THE PLANS. THE CONSTRUCT PROJECT. (� AWARE OF ALL ITEMS TO BE DEMOLISHED AND REMOVED INCLUDING, BUT NOT LIMITED TO 2. EXIT SIGNS WILL BE LIGHTED SO THAT THEY ARE CLEARLY VISIBLE. C. PICTORIAL SYMBOL SIGNS (PICTOGRAMS) SHALL BE ACCOMPANIED BY THE COMPLIANCE TO THE WATER QUALITY STANDARDS AND ANY EROSION CONTROL PLAN PLUMBING FIXTURES, CONDUIT, MILLWORK AND FLOOR FINISHES, WHETHER SPECIFICALLY 3. EXIT SIGNS WILL BE ELECTRICALLY ILLUMINATED AND THE TWO LAMPS WILL BE EQUIVALENT VERBAL DESCRIPTION PLACED DIRECTLY BELOW THE PICTOGRAM. THE BORDER ASSOCIATED WITH THIS PROJECT INCLUDES, BUT IS NOT LIMITED TO THE FOLLOWING INDICATED OR NOT, ENERGIZED FROM SEPARATE CIRCUITS. ILLUMINATION SHALL NORMALLY BE PROVIDED BY DIMENSION OF THE PICTOGRAM SHALL BE A MINIMUM OF 6" IN HEIGHT. REQUIREMENTS: 2. THE CONTRACTOR SHALL REFINISH ANY BLEMISHED DOOR, OR REPLACE SAID DOOR IF PREMISES WRING SYSTEM. IN THE EVENT OF FAILURE OF THIS SYSTEM, ILLUMINATION WILL 1. SEDIMENTS AND OTHER POLLUTANT SHALL BE RETAINED ON SITE UNTIL PROPERLY NOT ABLE TO PROPERLY FINISH. BE AUTOMATICALLY PROVIDED FROM AN EMERGENCY SYSTEM. 7. CONTRACTED GRADE 2 BRAILLE SHALL BE USED WHEREVER BRAILLE SYMBOLS ARE DISPOSED OF, AND MAY NOT BE TRANSPORTED FROM THIS SITE VIA SHEET FLOW, CES AND TAPE AND SAND LL BE PROVIDED TO GIVE A LEVEL OF 1 FOOT CANDLE TO SPECIFICALLY REQUIRED IN OTHER PORTIONS OF THESE REGULATIONS. DOTS SHALL BE 1/10" SWALES AREA DRAINS, NATURAL DRAINAGE COURSES OR WIND. THE CONTRACTOR IS TO SURVEY AND REPAIR ALL WALL SURFACES 4. EMERGENCY LIGHTING SHA ANY DAMAGES TO DRYWALL OR EXISTING EXTERIOR OR INTERIOR DRYWALL PARTITION2/)0" 1 016 EXITWAY AT FLOOR LEVEL. ON CENTER IN EACH CELL WITH 2/'I 0" SPACE BETWEEN CELLS. DOTS SHALL BE RAISED A 2. STOCKPILES OF EARTH AND OTHER CONSTRUCTION RELATED MATERIALS SHALL BE `� ERECTED UNDER BASE BUILDING. PREPARE TO RECEIVE FINISHES AS SCHEDULED. 5. SIGN "THIS DOOR TO REMAIN UNLOCKED DURING BUSINESS HOURS" TO BE POSTED MINIMUM OF 1/40" ABOVE THE BACKGROUND PROTECTED FROM BEING TRANSPORTED FROM THE SITE BY THE FORCES OF WIND AND Bid Date: 07-12-2016 3. VERIFY "ROUGH-IN" REQUIREMENTS WITH ALL EQUIPMENT MANUFACTURERS BEFORE OVER MAIN ENTRANCE. WATER FLOW. PROCEEDING. CORRIDORS, OPENINGS AND _EXITS 8. WHEN PERMANENT IDENTIFICATION IS PROVIDED FOR ROOMS AND SPACES, RAISED 3• FUELS, OILS, SOLVENTS AND OTHER TOXIC MATERIALS SHALL BE STORED IN Revisions 4. WHERE NEW CONSTRUCTION ABUTS EXISTING, SURFACES SHALL BE ALIGNED TRUE 1. MAINTAIN 44" CLEAR MINIMUM AISLE WIDTH TO REQUlRFD EXITS. LETTERS SHALL BE ACCOMPANIED BY BRAILLE. SIGNS SHALL BE INSTALLED ON THE WALL ACCORDANCE WITH THEIR LISTING AND ARE NOT TO CONTAMINATE THE SOIL AND SURFACE CITY SUBMTTTAL AND FLUSH TO THE DESIGNER'S SATISFACTION. 2. EVERY EXIT DOOR SHALL BE OPERABLE FROM THE INSIDE WITHOUT USE OF A KEY OR ADJACENT TO THE LATCH SIDE OF THE DOOR. WHERE THERE IS NO WALL SPACE ON THE WATERS. ALL APPROVED STORAGE CONTAINERS ARE TO BE PROTECTED FROM THE 08-01-16 x ' �'' 3 - � AF DOORS, SIGNS SHALL BE PLACED ON THE NEAREST WEATHER. SPILLS MUST BE CLEANED UP IMMEDIATELY 5. ALL MILLWORK SHALL CONFORM TO THE APPLICABLE REQUIREMENTS FOR "CUSTOM ANY SPECIAL KNOWLEDGE OR EFFORT, SPECIAL LOCKING DEVICES SHALL BE OF AN LATCH SIDE, INCLUDING DOUBLE LEAND DISPOSED OF IN A PROPER MANNER. SPILLS MAY NOT BE WASHED INTO THE DRAINAGE GRADE" PER THE WIC "MANUAL OF MILLWORK" OR COMPARABLE AW STANDARDS, LATEST APPROVED TYPE. DOORS ARE TO BE OPERABLE BY A SINGLE EFFORT. FLUSH BOLTS OR ADJACENT WALL, PREFERABLY ON THE RIGHT. WALL-MOUNTED TACTILE SETTLE OR IN E SIGNAGE IS TO BE NAGE SYSTEM, NOR BE ALLOWED TO FILTRATE INTO SOIL. _. EDITION UNLESS OTHERWISE NOTED. SURFACE BOLTS ARE PROHIBITED. MOUNTED AT 48" MIN AFF TO THE BASELINE OF THE LOWEST BRAILLE CELL, AND 60" MAX e 4. EXCESS OR WASTE CONCRETE MAY NOT BE WASHED INTO THE PUBLIC WAY OR ANY 6. ALL AREAS TO RECEIVE MILLWORK ARE TO BE FIELD MEASURED PRIOR TO 3. EXIT DOORS SHALL SWING IN THE DIRECTION OF TRAVEL WHEN SERVING A HAZARDOUS AFF TO THE BASELINE OF THE HIGHEST LINE OF RAISED CHARACTERS. MOUNT SIGNAGE AT 9" OTHER DRAINAGE SYSTEM. PROVISIONS SHALL BE MADE TO RETAIN CONCRETE WASTES FABRICATION AND INSTALLATION. AREA OR WHEN SERVING AN AREA HAVING AN OCCUPANT LOAD OF 50 OR MORE. MINIMUM FROM CENTERLINE TO DOOR JAM. MOUNTING LOCATION SHALL BE DETERMINED SO ON SITE UNTIL THEY CAN BE DISPOSED OF AS SOLID WASTES. THAT A PERSON MAY APPROACH WITHIN 3" OF THE SIGNAGE WITHOUT ENCOUNTERINGL . 5. TRASH AND CONSTRUCTION SOLID WASTES SHALL BE DEPOSITED INTO A COVERED DIRECTORY PROTRUDING OBJECTS OR STANDING WITHIN THE SWING OF A DOOR. 6; RECEPTACLE TO PREVENT CONTAMINATION OF RAIN WATER AND DISPERSAL BY WIND Project No. : 16-A114 6. SEDIMENTS AND OTHER MATERIALS MAY NOT BE TRACKED FROM THE SITE BY x 9. ALL BUILDING ENTRANCES THAT ARE ACCESSIBLE TO AND USABLE BY PERSONS WITH VEHICULAR TRAFFIC. THE CONSTRUCTION ENTRANCE ROADWAY MUST BE STABILIZED SO DISABILITIES AND AT EVERY MAJOR JUNCTION ALONG OR LEADING TO AN ACCESSIBLE ROUTE AS TO INHIBIT SEDIMENTS FROM BEING DEPOSITED INTO THE PUBLIC WAY. ACCIDENTAL DELI DELICIOUS COMPANY OWNER TENANT DESIGNER MEP CONSULTANT CONTRACTOR OF TRAVEL SHALL BE IDENTIFIED WITH A SIGN DISPLAYING THE INTERNATIONAL SYMBOL OF DEPOSITS SHALL BE SWEPT UP IMMEDIATELY AND MAY NOT BE WASHED DOWN BY RAIN = Y3$ Sheet Title : ATTENTION: MARK PURDOM SHARANDEEP DHILLON HOOTAN & ASSOCIATES, CDI ARCHITECTS TBD ACCESSIBILITY AND ADDITIONAL DIRECTIONAL SIGNS, AS REQUIRED, TO BE VISIBLE TO PERSONS OR OTHER MEANS. HESAM HOBAB 2495 WEST SHAW AV. ATT PROPERTIES P: 510) EP DHI54 ATTN: HOOTAN HAMEDANI ATTIC: DAVID KANG ALONG APPROACHING PEDESTRIAN WAYS. 7. ANY SLOPES WITH DISTURBED SOILS OR REMOVED VEGETATION SHALL BE STABILIZED SKN ( 1D. DOORWAYS LEADING TO ACCESSIBLE TOILET ROOMS AND BATHING ROOMS SHALL BE FRESNO CALIFORNIA 93711 BOERSMA PROPERTIES LP RINKDHILLON@YAHOO.COM 14252 CULVER DR., SUITE 16520 BAKE PARKWAY, IDENTIFIED BY A GEOMETRIC SYMBOL COMPLYING WITH SECTION 118-703.7.2.6. REFERENCE TO INHIBIT EROSION BY WIND AND WATER. - TITLE SHEET CA 92604 SUITE 100, IRVINE 8. STORM WATER POLLUTION PREVENTION DEVICES AND/OR PRACTICES SHALL BE "` P: (559) 435-5305 C/O AIM PROPERTY MANAGEMENT MIKE JOHAL #170 IRVINE, CBC SEC. 11B-216.8. F: 877 306-7079 1212 K STREET MR.JOHALOYAHOO.COM P: (949) 645-3343 CA 92618 MODIFIED AS NEEDED AS THE PROJECT PROGRESSES TO ENSURE EFFECTIVENESS. �' N ( ) P: 888 505-0052 THE SYMBOL SHALL BE MOUNTED AT 58 INCHES MINIMUM AND 60 INCHES MAXIMUM ABOVE FRANCHISESUPPORTODELI-D.COM MODESTO, CA 95354 {510) 714-8875 F: (484) 377-8135 { ) THE FINISH FLOOR OR GROUND SURFACE MEASURED FROM THE CENTERLINE OF THE SYMBOL. 888 505-0052 SITE LOCATION - Tol P: (209) 575---5900 5700 STONERIDGE MALL RD #240 HOOTANOHOOTANINC.COM F ( ) WHERE A DOOR IS PROVIDED THE SYMBOL SHALL BE MOUNTED WITHIN 1 INCH OF THE PLEASANTON, CA 94588 DKANGOCDIARC.COM VERTICAL CENTERLINE OF THE DOOR.