Laserfiche WebLink
2. PERMIT <br /> 2.1. An application for a permit is required for a Well, including: Geotechnical, <br /> Geophysical, Recharge, Reconditioning, Deepening, Cathodic Protection, <br /> Monitoring*, Test Well, Subsurface Boring, Injection, Extraction and Vapor Probe. <br /> (*See Section 13 for Monitoring Well Construction Requirements) <br /> 2.1.1. The licensed well contractor (C-57), or his authorized representative, shall <br /> make application on forms furnished by the San Joaquin County <br /> Environmental Health Department. The application shall contain the <br /> following information and a plot plan drawn to scale. <br /> 2.1.1.1 Owner's name and address. <br /> 2.1.1.2 Address of parcel and/or Assessor's parcel number (APN). <br /> 2.1.1.3 Names of streets or roads nearest to, or bordering the <br /> property. <br /> 2.1.1.4 Outline of the property giving dimensions and North direction. <br /> 2.1.1.5 Dimensioned outlines and locations of all existing and <br /> proposed structures, including covered areas such as patios, <br /> driveways and walkways. <br /> 2.1.1.6 Location of house sewer outlet, public sewer, sewage disposal <br /> system or proposed sewage disposal system, proposed <br /> expansion of sewage disposal system, or any other possible <br /> source of contamination. <br /> 2.1.1.7 Location of proposed new well, other existing wells and <br /> sewage disposal systems within a radius of 100 feet on the <br /> property or adjoining property. <br /> 2.1.1.8 Intended use of the well. <br /> 2.1.1.9 Name, address and license number of licensed well <br /> driller/pump contractor. <br /> 2.1.1.10 Note on permit application if the well is in a flood plain or <br /> drainage course. <br /> 2.2. A pump permit shall be required anytime the sanitary seal in the wellhead is <br /> removed. <br /> 2.2.1. The owner of the property or the appropriate licensed well or pump <br /> contractor shall make application on forms furnished by the EHD. <br /> 2.2.2. The installation or repair of a pump will require a plot plan showing the <br /> location of the well and pump and any structures. <br /> 2.2.3. If pump and motor are not installed by the well contractor, approval of the <br /> well construction will be given for the contracted work and a separate <br /> permit shall be obtained for installing the pump and motor. <br /> EHD 43-03 Page 8 of 27 WELL STANDARDS <br /> 10/9/07 <br />